Home

Rush Machinery

Products

+ click to show 19 results
RushCut Cut-Off Machine
Based on the Easy-Cut, the new and improved RushCut is a fully enclosed semi-automatic cut- off machine, designed for quick and easy cutting of carbide rod, high speed steel, and tool ends with diameters between 1/8′′ (3.175 mm) to 1-1/4′′ (31.75 mm). PLC controlled, the RushCut has air actuated work piece clamping and hydraulic feed cutting…
CNC Auto-Cut Cut-Off Machine
Designed for cutting tool manufacturers and carbide rod processors, this production machine can significantly increase your production rate for cutting carbide and hardened steel rod when compared with manual cut-off machines. It's easy-to-use CNC controls and touch screen operator interface allow for quickly setting parameters in preparation…
Truing Parameters Calculator
The Truing Parameters Calculator is the result of a 3-year collaboration between Rush Machinery, the International Grinding Institute, and Dr. Jeffrey Badger, the ‘Grinding Doc’. Rush Machinery commissioned the project that was later presented at the 2008 CIRP General Assembly in Tokyo by Dražumerič, Badger, Klement, and Krajnik titled “Truing of…
CH-CM0406 Cut Pre-Point Chamfer Machine
The CH-CM0406 Cut Pre-Point Chamfer Machine makes carbide blanks that are ready for tool grinding. The machine converts blank carbide rods into tool blanks. It is suitable for cutting tool manufacturers that want to make tools from a blank that is already pre-pointed and chamfered. The machine is easy to setup and runs unattended.
FC-350EX and FC-350W Wheel Truing and Dressing Machines
Rush Machinery offers the Model FC-350EX and Model FC-350W wheel truing and dressing machines, designed for truing and dressing flats, angles, and radii on diamond and CBN single wheels and multiple wheel packs.
CH-CM0203 CNC Carbide Rod Chamfer Machine
Rush Machinery is offering the CH-CM0203 CNC Carbide Rod Chamfer Machine for chamfering blanks for carbide and HSS cutting tools. The machine comes equipped with a large-capacity magazine, an automatic loader, a flood coolant system, 2-axis servomotor and servo amplifier, and fully automatic CNC.
2 Rod “Auto-Cut” CNC Carbide Cut-Off Machine
The 2 Rod “Auto-Cut” CNC Carbide Cut-Off Machine automatically cuts carbide rod into precision lengths. This production machine, designed for cutting tool manufacturers and carbide rod processors, has a large-capacity magazine and an automatic loader to provide hours of unattended operation.
Easy-Cut XL Semiautomatic Carbide Cut-Off Machine
Rush Machinery offers the new Rush Easy-Cut XL semiautomatic carbide cut-off machine for quick and easy cutting of carbide flat stock up to 2”x4” or rod and tool ends with diameters between 1/8” to 2”.
BMT-150M On-Machine Balancing Kit
The BMT-150M On-Machine Balancing Kit from Rush Machinery for balancing wheels and wheel packs on truers or grinding machines. The kit comes with everything you need to get started.
FC-200D, FC-300D, FC-500D and FC-200CNC Tool Grinders
Rush offers the Models FC-200D, FC-300D, FC-500D and FC-200CNC polycrystalline tool grinders, which allow for economical manufacturing and regrinding of PCD, CVD, PCBN, carbide and HSS tools. These machines grind angles and radii on standard and special turning and milling inserts, boring tools, milling cutters, grooving tools, reamers and special…
Drill and Tool Grinders
Rush Machinery Inc.'s Drill and Tool Grinders have helped thousands lower their holemaking costs through higher precision, faster production, less down time and reduced tool inventory.
Model FC-250W Truing and Dressing Machine
Ideal for tool manufacturers, grinding wheel manufacturers, and production grinding facilities, the economical Model FC-250W Diamond/CBN Wheel Truing and Dressing Machine from Rush Machinery Inc. is for truing and dressing flats, angles, and radii on diamond and CBN single wheels and multiple wheel packs.
Grinding Fluid Filtration System
The Rush Grinding Fluid Filtration system offers an optional magnetic separator prefilter and collection unit to handle high volume swarf applications with ease.
Model FC-700
Rush Machinery offers the large capacity Model FC-700 Series Diamond and CBN Wheel Truing and Dressing Machine.
Airbearing Endmill Grinding Fixtures
Rush Machinery Inc. offers a series of airbearing end mill grinding fixtures that allow precision sharpening of end mills, reamers, shell mills and other cutters.
Automatic Diamond and CBN Wheel Truing machines
The FC-250EX and FC-700EX Automatic Diamond and CBN Wheel Truing and Dressing Machines from Rush Machinery, Rushville, N.Y., are designed for truing and dressing of flats, angles and radii on diamond and CBN single wheels and multiple wheel packs, according to a Rush news release.
FC-250EX and FC-700EX
The Models FC-250EX and FC-700EX from Rush Machinery Inc. are designed for truing and dressing of flats, angles, and radii on diamond and CBN single wheels and multiple wheel packs.
FC-300
Rush Machinery Inc. introduces redesigned high-performance filtration systems.
Rush Machinery Grinding machines
Grinding machines from Rush Machinery Inc. produce carbide and HSS drills and other cutting tools, including taps, reamers, countersinks and endmills.

Articles

+ click to show 1 results

True upgrade: Dedicated wheel truing

Author: CTE Staff

Column: Productive Times

Published:

Videos

+ click to show 10 results

Rush IMTS 2024 Booth Visit

Mike Coffey, a field service engineer at Rush Machinery, showcases the RushCut, a PLC-controlled machine designed for efficient cutoffs. It features adjustable clamping, customizable work holding, and a direct coolant system for enhanced performance. The user-friendly touchscreen allows for easy programming, while safety features prevent operation…

CTE Booth Visit with Rush Machinery @ Eastec

Rush Machinery Sales Manager Doug Lewis highlighted the features of the CH-CM0206 Auto-Cut machine at the Rush booth during Eastec 2023, and noted that the machine is ideal for tool manufacturers and carbide rod processors.

Grinding Doc discusses Truing Parameters Calculator

Jeff Badger, Ph.D., a grinding expert and the author of CTE's Grinding Doc column, provides a practical tour of the Truing Parameters Calculator he helped develop along with Rush Machinery and the International Grinding Institute.

IMTS 2022 Booth Visit with Rush Machinery

Michael Coffey, a field service engineer for Rush Machinery, demonstrates a new 360-degree guard for the company’s FC-350W wheel truing and dressing machine with Rush Vision and Auto View.

Cutting, prepointing and chamfering machine from Rush Machinery

This Rush Machinery video offers an overview of the company’s CH-CM0406 Cut-Prepoint-Chamfer Machine, which converts full length blank carbide rods into tool blanks that are ready for fluting and finishing grinding.

Defining Truing Parameters: Parts One, Two & Three

Watch Cutting Tool Engineering's special three-part video report that follows along as Rush Machinery in Rushville, N.Y., and Jeffrey Badger, Ph.D., a.k.a. the Grinding Doc, collaborate to establish scientific truing parameters. The report encompasses episodes 83, 84 and 85 of CTE's Grinding Doc video series.

Episode 85: Defining truing parameters, part three

Thanks to a collaboration between Dr. Jeffrey Badger and Rush Machinery in Rushville, N.Y., shops now have some practical guidelines when it comes to truing parameters. Badger shares some of this new-found advice in 85th episode of Cutting Tool Engineering's Grinding Doc video series. 

Episode 84: Defining truing parameters

For the 84th episode of the CTE Grinding Doc video series, Dr. Jeffrey Badger offers some preliminary results and observations from his work with Rush Machinery to establish scientific truing parameters.

Episode 83: Defining truing parameters

For the 83rd episode of Cutting Tool Engineering's Grinding Doc video series, Dr. Jeffrey Badger visits with Rush Machinery in Rushville, N.Y., to begin a three-part series devoted to establishing scientific truing parameters. With the help of Rush Machinery President Bill Freese, Badger conducts a series of truing tests using the Grinding…

True upgrade

Produced as an online complement to the October 2009 Productive Times article in Cutting Tool Engineering, this brief video looks at Myles Tool's decision to use a wheel truing machine from Rush Machinery.

People & Companies

+ click to show 6 results

Rush Machinery hires field service technician

Rush Machinery has appointed Tom Lebel as field service technician.

Rush highlights balancing and wheel dressing truing machines

Rush Machinery will showcase a balancing machine and a wheel truing and dressing machine at the 2022 International Manufacturing Technology Show (IMTS), being held at Chicago’s McCormick Place from September 12–17. Rush Machinery can be found in Booth 237233.

Rush Machinery hires new sales manager

Rush Machinery has hired Doug Lewis as a new sales manager. He joins current sales manager Rob Robbins as the company continues to grow.

Rush Machinery hires electrical technician

Rush Machinery hires an electrical technician who is a graduate of the Finger Lakes Technical Center.

Rush Machinery showcasing a range of equipment at IMTS

Rush Machinery will showcase a range of equipment at the 2022 International Manufacturing Technology Show (IMTS) including wheel truing and dressing machines, CNC and semi-automatic carbide rod cut-off machines, and a CNC carbide rod chamfer machine.

Rush Machinery showcases multiple technologies at trade show

At this year’s Eastec trade show, Rush Machinery plans to display the FC-350W wheel truing and dressing machine with new accessories and functionality as well as the Auto-Cut carbide rod cut-off machine.