1B insert

Contact Details

Kennametal Inc.

Address

525 William Penn Place, Suite 3300

Pittsburgh

15219

PA

United States

Map It

Phone

724-539-5000

Toll Free Phone

800-446-7738

Fax

724-539-5022

View Website

Send Email

View Buyers Guide

March 01, 2010

A new turning geometry for the finish turning of components manufactured from steel to the most difficult-to-machine materials, such as high-temperature alloys, has been launched by ATI Stellram. The Stellram 1B insert is available in a choice of hard- wearing grades comprising of SP0819, which is designed for high cutting speeds on difficult-to-machine materials, and Nitro-Lok coated NL37, designed for high cutting speeds in unalloyed and alloyed steels. These grade and coating technologies combined with this unique geometry, not only boost productivity but improve component integrity. 1B Geometry features a precisely controlled cutting edge and nose profile, designed so that material can be removed cleanly, and efficiently leaving a superior surface finish at varying depths of cut and feed rates. According to ATI Stellram, the 1B geometry has been designed in combination with proven grades and coatings to provide high resistance to heat and edge breakdown, resulting in little to no loss in tool life while still increasing productivity.

Related Glossary Terms

alloys
alloys
Substances having metallic properties and being composed of two or more chemical elements of which at least one is a metal.
feed
feed
Rate of change of position of the tool as a whole, relative to the workpiece while cutting.
turning
turning
Workpiece is held in a chuck, mounted on a face plate or secured between centers and rotated while a cutting tool, normally a single-point tool, is fed into it along its periphery or across its end or face. Takes the form of straight turning (cutting along the periphery of the workpiece); taper turning (creating a taper); step turning (turning different-size diameters on the same work); chamfering (beveling an edge or shoulder); facing (cutting on an end); turning threads (usually external but can be internal); roughing (high-volume metal removal); and finishing (final light cuts). Performed on lathes, turning centers, chucking machines, automatic screw machines and similar machines.

Additional Products from Kennametal Inc.

HiPACS Drilling and Countersinking System

HiPACS for Aerospace Fastener Hole Drilling and Countersinking

The HiPACS drilling and countersinking system can be utilized on all machines typically used for aerospace applications. In less stable conditions such as robot end effectors, the diamond coated carbide drills offer excellent tool life and hole quality. PCD-tipped drills, on the other hand, excel…

FBX Drill

The FBX drill is part of a tooling concept specifically developed to maximize metal removal rates and decrease cycle times when machining aerospace structural components. Quickly removing large amounts of material remains a challenge for these types of components. Traditionally, the first process…

PCD Round Tools

Extremely sharp cutting edges and low-friction rake surfaces eliminate concerns over built-up- edge. Low friction machining also produces superior surfaces in finishing operations, such as reaming. Surface roughness of Ra 0,1–0,8 μm (0.0025–0.02 μ-in) is achievable – far superior to conventional…

HARVI I TE Ball Nose End Mill

he HARVI I TE ball nose end mill is available in two different lengths, both with a diameter range from 2 to 20 mm (1/16" to 1"). The regular length is the first choice for 3D copy milling operations, while the long version offers sufficient length-of-cut (up to 4sD) for many applications…

HPR Solid Carbide Drill

The drill’s patented point thinning, special gashing, and a 143°-point angle provide excellent self- centering capabilities and reduce thrust, keeping the drill running straight even at the highest feed rates. In addition, four margin lands deliver maximum stability when drilling cross holes and…

KCFM 45 Face Milling Cutter

Fine-Finishing Face Mill for Cast Iron Exceeds Highest Surface Requirements

With fixed and adjustable pocket seats, the new milling cutter provides the option for semi-finishing as well as fine-finishing applications, exceeding the highest surface quality requirements. With carbide, ceramic and PcBN inserts, this new tool is a flexible, cost-effective and user-friendly…

KenTIP FS FEG Insert

FEG Insert for Flat Bottom Hole Applications

Drilling flat-bottom holes is a challenge. So is drilling on inclined or curved surfaces, drilling into cross holes, drilling stacked plates, and drilling into cross holes, stacked plates and castings and other rough surfaces. Not anymore. Leveraging the success of its KenTIP FS modular drill,…

HARVI I TE 4-Flute Solid-Carbide Endmill

Kennametal announced the latest addition to its HARVI line of high-performance solid endmills, the HARVI I TE 4-flute solid-carbide endmill. With a radical new design, the HARVI I TE delivers outstanding performance in a broad range of materials, including steel, stainless steel, high-temperature…

3D-Printed Stator Bore Tool

Kennametal has developed a 3D-printed stator bore tool to meet growing customer demand for lighter weight tooling solutions used to machine components for hybrid and electric vehicles. E-mobility components are typically machined on small, low-horsepower CNC machining centers that require lighter…

TACU ER Units and Solid ER Collets

Kennametal announced an expansion of the turret-adapted clamping units (TACU): ER-ready driven units in conjunction with a line of solid ER collets that are threaded to accept screw-on milling cutters.