1B insert

Contact Details

Kennametal Inc.

Address

525 William Penn Place, Suite 3300

Pittsburgh

15219

PA

United States

Map It

Phone

724-539-5000

Toll Free Phone

800-446-7738

Fax

724-539-5022

View Website

Send Email

View Buyers Guide

March 01, 2010

A new turning geometry for the finish turning of components manufactured from steel to the most difficult-to-machine materials, such as high-temperature alloys, has been launched by ATI Stellram. The Stellram 1B insert is available in a choice of hard- wearing grades comprising of SP0819, which is designed for high cutting speeds on difficult-to-machine materials, and Nitro-Lok coated NL37, designed for high cutting speeds in unalloyed and alloyed steels. These grade and coating technologies combined with this unique geometry, not only boost productivity but improve component integrity. 1B Geometry features a precisely controlled cutting edge and nose profile, designed so that material can be removed cleanly, and efficiently leaving a superior surface finish at varying depths of cut and feed rates. According to ATI Stellram, the 1B geometry has been designed in combination with proven grades and coatings to provide high resistance to heat and edge breakdown, resulting in little to no loss in tool life while still increasing productivity.

Related Glossary Terms

alloys
alloys
Substances having metallic properties and being composed of two or more chemical elements of which at least one is a metal.
feed
feed
Rate of change of position of the tool as a whole, relative to the workpiece while cutting.
turning
turning
Workpiece is held in a chuck, mounted on a face plate or secured between centers and rotated while a cutting tool, normally a single-point tool, is fed into it along its periphery or across its end or face. Takes the form of straight turning (cutting along the periphery of the workpiece); taper turning (creating a taper); step turning (turning different-size diameters on the same work); chamfering (beveling an edge or shoulder); facing (cutting on an end); turning threads (usually external but can be internal); roughing (high-volume metal removal); and finishing (final light cuts). Performed on lathes, turning centers, chucking machines, automatic screw machines and similar machines.

Additional Products from Kennametal Inc.

Mill 4-15

Experienced manufacturers know that when milling, three main considerations predominate: metal removal rate, tool life, and surface finish. All three are critical to successful metalworking, but often one will predominate. Manufacturers facing parts requiring 90-degree shoulders also know that…

Romicron Fine Boring Tools

Romicron fine-boring systems from Kennametal allow users to dial in extremely close tolerances while the tool is mounted in the machine tool, saving time and easing training.

CERAMIQ Ceramic Abrasive Products

ATI Stellram based at Ibstock U.K. have introduced a multi-purpose range of ceramic abrasives.

Beyond KYS40 Solid-Ceramic Endmill

New Beyond KYS40-grade solid ceramic endmills from Kennameta are presenting orders-of-magnitude improvements in machining high-strength nickel-based alloys, roughing at cutting speeds up to 3,300 SFM (1000 m/min) with tool life two to three times longer than comparable solid-carbide tools.

NL Turning Grades

These five new Stellram NL turning grades are specifically engineered to provide optimal performance in a given application and workpiece material resulting in increased metal removal rates, improved surface finishes and up to 30 percent longer tool life, according to the company.

UltraFlex Surface Treatment

UltraFlex, a new portfolio of wear-resistant surface treatments from Kennametal, brings industry-leading wear performance to components with complex geometries in power generation, oil and gas, and many other industries.

HYDROM Electrolyte Cleaning Unit

For manufacturers facing complex or stringent machining or finishing issues, electrochemical machining (ECM) is a notable process by which material can be removed inµm increments, reaching areas unreachable by other methods. To support the ECM process, Kennametal Extrude Hone has designed an…

ToolBOSS Tool Management System

One of the most fundamental keys to running an efficient and cost-effective plant is having the right tool in the right place at the right time. While the cost of a milling or turning insert may range from a few dollars to significant investment, not having that tool available when needed can shut…

Kennametal Innovations iPad Application

The "Kennametal Innovations" app features interactive, cutting-edge animations and real-world demonstrations of Kennametal's productivity-enhancing technologies for machining and industrial processes.

KSRM Milling Cutters

The KSRM line of cutters is a new, multipurpose milling solution from Kennametal specifically engineered for titanium and stainless steel applications.