Tungaloy has expanded its AddInternalCut indexable internal grooving tool system by increased insert width options.
AddInternalCut internal grooving tool line features ground-to-precision inserts with four economical cutting edges. Unique and strong insert holding system provides tool rigidity and smooth chip evacuation, ensuring superior edge repeatability and precision machining.
The insert is clamped in the seat so that, in case the cutting edge is broken during machining, the remaining un-used cutting edges are protected, allowing all four edges to be effectively used. Being supported at three points when clamped in the seat, the insert provides accurate insert position repeatability and stable performance even in high speed and feed rate conditions. Furthermore, the insert is double sided and can be mounted on either a right- or left-hand toolholder, allowing easy inventory management.
AddInternalCut inserts are available in two sizes: TCIG10 insert is for internal grooving of minimum bore diameter of 10.5 millimeters (.413 inches) and up. TCIG12 allows a maximum groove depth (CDX) of 3.0 millimeters (.118 inches).
The newly introduced AddInternalCut grooving inserts are capable of cutting extremely thin internal grooves of 0.5 millimeters (.020 inches), as well as groove widths from 1.22 to 2.77 millimeters (from .048 to .109 inches), covering industry-standard groove profiles such as circlips and o rings.
Machining grooves and shallow channels. Example: grooving ball-bearing raceways. Typically performed by tools that are capable of light cuts at high feed rates. Imparts high-quality finish.
Machining and measuring to exacting standards. Four basic considerations are: dimensions, or geometrical characteristics such as lengths, angles and diameters of which the sizes are numerically specified; limits, or the maximum and minimum sizes permissible for a specified dimension; tolerances, or the total permissible variations in size; and allowances, or the prescribed differences in dimensions between mating parts.
DrillForce-Meister incorporates a unique seat design that enables easy and swift drill head exchanges, while maximizing the clamping security, making drilling easy on curved surfaces, inclined exits, or components with a stability problem. The seat is designed with a maximum possible contact…
DrillMeister incorporates a unique self-locking interface that enables simple and secure drill head exchange. Since drill heads can be replaced without having to remove the drill body from the spindle, tool setup time can significantly be reduced, eliminating presetting, offset, and touch-off of…
TungTurn-Jet toolholders deliver coolant strategically to the optimum position close to the cutting point of the insert. This significantly improves chip control when machining exotic materials that are prone to smearing by effectively breaking the chips into pieces and guiding them away from the…
DuoJust-Cut features innovative insert clamping ensuring tool rigidity and stability in various parting operations. In addition to existing JXPG insert with a ground in chipbreaker on the rake face, the new JXPS insert incorporates a 3D chipbreaker pressed in to its “dual-rake” cutting edge which…
This AH9130 grade expansion encompasses the DMP line of general-purpose drilling, succeeding the popular DMC drill head for precision drilling. Developed for drilling applications, AH9130 is a nano-multilayer PVD coating consisting of three distinctive layers.
DrillMeister offers the TIDCF chamfering holder that can be attached to the TID drill shank allowing chamfering and drilling in a single pass for reduced machining times. The chamfering inserts are available for 30°, 45°, and 60° chamfers. The new TIDCF holder line can accommodate smaller drills in…
AH8015 consists of a nano-multilayered PVD coating with high aluminum content. This coating characteristic provides increased resistance against wear and built-up edge over existing grades, enabling long and predictable tool life during the machining of heat resistant superalloys and stainless…
Designed for the internal grooving of bores with diameters as small as 8.0 mm (.315″) up to 24.0 mm (.945″), while promising reliable chip evacuation. The shanks are made of either steel for economy or tungsten carbide for long reach areas where tool steadiness is vital. Virtually eliminate chip…
The TungTurn-Jet system strategically directs the internal coolant jet exactly where it is needed, close to the cutting point on the insert rake face. This dramatically improves chip control during the machining of difficult-to-cut materials, which is not the case with conventional coolant delivery…
Tungaloy expands its TungCut series of grooving tools to include a parting blade CGP32-CHP with the ability to internally supply high-pressure coolant.
PRODUCTS
