Tungaloy has expanded its AddInternalCut indexable internal grooving tool system by increased insert width options.
AddInternalCut internal grooving tool line features ground-to-precision inserts with four economical cutting edges. Unique and strong insert holding system provides tool rigidity and smooth chip evacuation, ensuring superior edge repeatability and precision machining.
The insert is clamped in the seat so that, in case the cutting edge is broken during machining, the remaining un-used cutting edges are protected, allowing all four edges to be effectively used. Being supported at three points when clamped in the seat, the insert provides accurate insert position repeatability and stable performance even in high speed and feed rate conditions. Furthermore, the insert is double sided and can be mounted on either a right- or left-hand toolholder, allowing easy inventory management.
AddInternalCut inserts are available in two sizes: TCIG10 insert is for internal grooving of minimum bore diameter of 10.5 millimeters (.413 inches) and up. TCIG12 allows a maximum groove depth (CDX) of 3.0 millimeters (.118 inches).
The newly introduced AddInternalCut grooving inserts are capable of cutting extremely thin internal grooves of 0.5 millimeters (.020 inches), as well as groove widths from 1.22 to 2.77 millimeters (from .048 to .109 inches), covering industry-standard groove profiles such as circlips and o rings.
Machining grooves and shallow channels. Example: grooving ball-bearing raceways. Typically performed by tools that are capable of light cuts at high feed rates. Imparts high-quality finish.
Machining and measuring to exacting standards. Four basic considerations are: dimensions, or geometrical characteristics such as lengths, angles and diameters of which the sizes are numerically specified; limits, or the maximum and minimum sizes permissible for a specified dimension; tolerances, or the total permissible variations in size; and allowances, or the prescribed differences in dimensions between mating parts.
ISO-EcoTurn inserts, while downsized for tool economy, incorporate the identical chipbreaker geometry and thickness of regular sized inserts to maintain the same cutting performance at a depth of cut up to 3.0 mm (0.12"). This expansion provides more cost efficient solutions in steel turning…
AH9130, consisting of a PVD coating layer optimized for drilling applications with a dedicated carbide substrate, is the latest insert grade specifically developed to provide significant tool life improvements and more predictable wear patterns in hole making applications of ISO P (steel), ISO M (…
TungBore-Mini is a multifunctional drilling and turning tool line that integrates the capabilities of drilling, OD, and ID turning tools. Its unique XOMU insert features an innovative geometry incorporating a large inclination angle on the cutting edge that produces light cutting, compared with…
Two new grades have been added to TungCut to enhance its capacity in exotic materials: AH8005 insert grade, featuring strong coating adherence to its carbide substrate, eliminates notch wear that typically occurs during the machining of heat-resistant superalloys (HRSAs). New geometries include DGS…
The thick CrAlN coating provides high hardness and oxidation resistance solving issues related to machining materials such as: 304SS, 17-4PH, and Nitinol. High speed machining applications with ST4 inserts have proven results with stable machining, excellent surface finishes, and extended tool life.
CeramiX HX5 Grade succeeds in matching the performance characteristics of CBN with the added benefit of being a less expensive product compared to CBN. A special TiAlN coating offers excellent wear resistance for hard turning applications.
The sharpness of these end mills reduces the occurrence of burrs, produces remarkable surface finish, and improves tool life to outperform the competition. S-Mills are available in 2, 3, and 4 flute designs with a range of diameters to cover a wide variety of applications (2 flute available in a…
The newest addition to the group is JP0 for continuous cuts when finishing HRSA parts and machining at 700 up to 1600 SFM. It brings improved wear resistance to provide performance and consistency of machined part straightness.
Easily adaptable to the spindle of existing CNC machines, the SpinJet provides instant enhancements in machining performance using small diameter cutting tools. No additional machine purchase or modifications are required: the SpinJet utilizes the machine’s existing through-spindle coolant supply…
DrillForce-Meister uses exchangeable drill tips designed to efficiently open large diameter holes ranging from 20.0 mm to 40.0 mm (.787″ – 1.575″) at a lower cost. With the drill tips being exchangeable, DrillForce-Meister not only eliminates the need for regrinding and recoating, as is the case…
PRODUCTS
