Tungaloy has announced the expansion of its AddMeisterDrill small diameter exchangeable head drills. The expansion includes the introduction of DMC high precision drill heads and addition of the drill diameters range from 4.0 mm to 4.4 mm (or from .157″ to .173″) to the existing DMP general-purpose drill heads, increasing the entire size range from 4.0 mm to 5.9 mm (from .157″ to .232″).
Featuring superior cutting performance of solid carbide drills and the ease-of-use of the DrillMeister exchangeable head drill series, AddMeisterDrill small-diameter exchangeable head drills allow quick and secure exchanges of extremely small drill heads thanks to its dedicated key. In addition, unique coolant outlets furnished on the drill body provides an increased ratio of through-coolant supply for improved chip evacuation and process security.
AddMeisterDrill now offers DMC high precision drill heads. Featuring a unique self-centering edge geometry, DMC drill heads facilitate quick penetration into materials, allowing high precision and stable drilling. The drill heads are available from 5.0 mm to 5.9 mm (from .197″ to .232″) in diameters in AH9130 PVD coated grade optimized for drilling applications. Extremely wear resistant, the grade provides extremely long tool life in carbon steel and alloy steel applications.
Also, with the addition of the new DMP drill head diameter range of 4.0 to 4.4 mm, AddMeisterDrill provides an optimized tool geometry for customers’ applications that need a boost in productivity.
Fluid that reduces temperature buildup at the tool/workpiece interface during machining. Normally takes the form of a liquid such as soluble or chemical mixtures (semisynthetic, synthetic) but can be pressurized air or other gas. Because of water’s ability to absorb great quantities of heat, it is widely used as a coolant and vehicle for various cutting compounds, with the water-to-compound ratio varying with the machining task. See cutting fluid; semisynthetic cutting fluid; soluble-oil cutting fluid; synthetic cutting fluid.
Tool-coating process performed at low temperature (500° C), compared to chemical vapor deposition (1,000° C). Employs electric field to generate necessary heat for depositing coating on a tool’s surface. See CVD, chemical vapor deposition.
Additional Products from Tungaloy-NTK America, Inc.
This expansion increases GH730 grade options of the VST and VTB slot milling heads and the VTR thread milling heads. A PVD grade consisting of extremely wear-resistant coating layer, combined with a tough carbide substrate dedicated to the coating, GH730 provides much better wear resistance than…
The QC10 series offers an extensive selection of modular heads for applications including forward turning, back turning, grooving, parting, and thread turning. All modular heads have an internal coolant channel designed to deliver high pressure coolant precisely where it is needed, close to the…
DX200 directly binds the diamond particles without using binder materials. This allows the grade to have an extremely pure cutting edge, making it an extremely effective tool for machining application-specific components that demand high levels of material purity, such as metal medical implants and…
DrillForceMeister incorporates a unique head-shank coupling interface that provides exceptional reliability when drilling relatively large diameter holes from 20 millimeters to 41 millimeters. When clamped, the drill head interlocks with the shank at larger contact areas, promoting high hole…
Providing exceptional reliability and increased tool life in steel, the new AH3225 insert grade consists of a unique nano-multilayer coating featuring three distinctive characteristics for improved resistance to built-up edge, wear, and delamination, combined with a dedicated tough carbide…
TCB now offers AH6225 grade inserts. This latest physical vapor deposition (PVD) coated grade features a high-hardness titanium-rich PVD coating, combined with a tough dedicated carbide substrate. Extremely reliable and versatile insert grade, AH6225 allows TCB to efficiently cut bores in all…
The CBN-tipped mini boring bars feature BX310 uncoated CBN grade that increases the grade’s wear resistance when used at low to medium cutting speeds, making it perfect for machining small bores from as small as 2.8 millimeter (.110 inch) diameter of hardened steel parts.
The QC16 line offers toolholders with 16x16 mm square shanks and the matching modular cutting heads. The new line features an enhanced coupling that is capable of sustaining high cutting edge repeatability and tool rigidity when used for applications generating greater cutting loads that…
DoMultiRec multifunctional milling cutter with center cutting capability enables a single tool to perform multiple milling operations, including shouldering, pocketing, and drilling. The DoMultiRec inserts to ensure strong and sharp cutting edges during various milling and drilling operations.
A PVD-coated cemented carbide grade, AH8015 features an extremely hard high-aluminum content multilayer coating that is combined with a tough dedicated carbide substrate. The grade provides the insert with a well-balanced wear and chipping resistance.
PRODUCTS
