Kennametal is introducing new high-performance HSS-E-PM (powder metal) Beyond taps for large-diameter tapping. Target applications for the new tools include some of the most essential wind turbine components such as hubs, rings, and gearbox housings.
With a highly wear-resistant powder metal substrate and proprietary top layers and coatings, the new Beyond HSS-E taps provide superior performance in tapping steel components such as gear rings and mainshafts; or for tapping cast-iron components such as hubs, housing, and gear boxes. The taps are available in sizes from M24 to M42.
Designed for both conventional non-rigid and CNC-synchronous tapping machines, precision h6 shanks enable use in either conventional tap holders with square drive or in precision round toolholders. Wind energy component suppliers will want to note an extra-long version is available to reach the longer overhangs common on these large components.
"Unlike other choices on the market, the addition of these large size taps with our KSEM Plus modular drilling program provide a complete solution to drill and finish the hole," says Marcelo Campos, Senior Global Product Manager, Tapping at Kennametal. "Where most other large-size taps are specials, we're providing a broad standard range of differentiated designs and coatings for increased speeds and better tool life across a wide spectrum of applications."
Cylindrical tool that cuts internal threads and has flutes to remove chips and carry tapping fluid to the point of cut. Normally used on a drill press or tapping machine but also may be operated manually. See tapping.
Machining operation in which a tap, with teeth on its periphery, cuts internal threads in a predrilled hole having a smaller diameter than the tap diameter. Threads are formed by a combined rotary and axial-relative motion between tap and workpiece. See tap.
The HiPACS drilling and countersinking system can be utilized on all machines typically used for aerospace applications. In less stable conditions such as robot end effectors, the diamond coated carbide drills offer excellent tool life and hole quality. PCD-tipped drills, on the other hand, excel…
The FBX drill is part of a tooling concept specifically developed to maximize metal removal rates and decrease cycle times when machining aerospace structural components. Quickly removing large amounts of material remains a challenge for these types of components. Traditionally, the first process…
Extremely sharp cutting edges and low-friction rake surfaces eliminate concerns over built-up- edge. Low friction machining also produces superior surfaces in finishing operations, such as reaming. Surface roughness of Ra 0,1–0,8 μm (0.0025–0.02 μ-in) is achievable – far superior to conventional…
he HARVI I TE ball nose end mill is available in two different lengths, both with a diameter range from 2 to 20 mm (1/16" to 1"). The regular length is the first choice for 3D copy milling operations, while the long version offers sufficient length-of-cut (up to 4sD) for many applications…
The drill’s patented point thinning, special gashing, and a 143°-point angle provide excellent self- centering capabilities and reduce thrust, keeping the drill running straight even at the highest feed rates. In addition, four margin lands deliver maximum stability when drilling cross holes and…
With fixed and adjustable pocket seats, the new milling cutter provides the option for semi-finishing as well as fine-finishing applications, exceeding the highest surface quality requirements. With carbide, ceramic and PcBN inserts, this new tool is a flexible, cost-effective and user-friendly…
Drilling flat-bottom holes is a challenge. So is drilling on inclined or curved surfaces, drilling into cross holes, drilling stacked plates, and drilling into cross holes, stacked plates and castings and other rough surfaces. Not anymore. Leveraging the success of its KenTIP FS modular drill,…
Kennametal announced its latest innovation in high-velocity aluminum roughing, the KOR 5 solid-carbide endmill. With this 5-flute endmill table feed rates increase up to 66% compared to commonly used 3-flute tools—redefining productivity for aircraft manufacturers and their suppliers.
Kennametal announced its latest innovation in hard turning, KBH10B and KBH20B PCBN grades, double-sided inserts for materials up to 65 HRC. The new grades deliver high productivity and long tool life when turning tool steels and other hardened materials.
Kennametal introduced another high-performance cutting tool, the B21*SGL solid-carbide drill with through-coolant. Designed for stainless steel, nickel and cobalt-based alloys, the B21*SGL with patented point geometry and monolayer PVD AlTiN coating, delivers improved productivity and longer tool…
PRODUCTS
