The new Sandvik Coromant solid carbide micro drills offer outstanding performance for holes from 0.073 inches to 0.116 inches in diameter. The CoroDrill 862 has a thin TiAlN coating that helps retain cutting edge geometry and provides a smooth surface for chip evacuation. This helps prolong tool life in workpiece materials that include steel, stainless steel, cast iron and aluminum.
The innovative post treatment on the CoroDrill 862, combined with specially designed point geometry, reduces the thrust forces and promotes fast and efficient chip removal. This is aided further by Advanced Chip Management (ACM) flute geometry, which helps evacuate the chips. This is vital in micro-drilling as even the smallest accumulation can lead to problems such as drill breakage, loss of precision, downtime and scrap.
The CoroDrill 862 also provides good hole entry and exit, and achievable hole tolerance of IT8-IT9. Internal coolant holes deliver coolant directly to the tip of the drill, even at deep drilling depths, to further assist precision and chip removal.
Available in drill lengths of 8-12 x D, the drills are only for use with HydroGrip high precision chucks from Sandvik Coromant.
Fluid that reduces temperature buildup at the tool/workpiece interface during machining. Normally takes the form of a liquid such as soluble or chemical mixtures (semisynthetic, synthetic) but can be pressurized air or other gas. Because of water’s ability to absorb great quantities of heat, it is widely used as a coolant and vehicle for various cutting compounds, with the water-to-compound ratio varying with the machining task. See cutting fluid; semisynthetic cutting fluid; soluble-oil cutting fluid; synthetic cutting fluid.
Sandvik Coromant has unveiled a new blade for its CoroCut QD parting-off system, which in combination with new process methodology, substantially improves the tool’s stability by realigning the resultant cutting force. Among numerous benefits available to the customer are improved productivity,…
Sandvik Coromant has extended the functionality of its InvoMilling software. The latest version of this user-friendly CAD/CAM solution for fast and simple NC programming offers even more possibilities when manufacturing gears on universal 5-axis machining centers.
Sandvik Coromant Co. says the CoroPlus Collision detector is a reliable solution that will help you avoid or minimize machine tool and workpiece damage in case of a collision. The solution is installed inside the machine tool, connected to the PLC (programmable logic controller) and will detect a…
To overcome the challenges of chip formation and evacuation when drilling nonferrous metals, Sandvik Coromant has unveiled its CoroDrill 880 CVD diamond-coated insert grades, GCN124 and GCN134. The superhard properties of the diamond coating provide long tool life and combine with innovative…
In conventional lathe-type machine tools, the capability of feed motion in the XZ plane is an inherent limitation. In a parting operation, this inevitably directs the resultant vector of cutting forces sharply across the cross-section of the tool, resulting in high loads and susceptibility to…
In response to strong demand for reliable machining solutions in the aerospace industry, Sandvik Coromant has launched new tapping and thread milling tools for ISO S materials (titanium and nickel-based alloys). The products have been specifically designed to enhance process security on high-value…
Sandvik Coromant has unveiled a new range of CoroTurn Prime multitask and axial-type toolholders to help machine shops implement the new PrimeTurning methodology, which enables turning in all directions. The introductions allow users to maximize the benefits of PrimeTurning on multitask turn-mill…
Sandvik Coromant has unveiled a new, high-feed version of the CoroMill 745 facemilling cutter, featuring a 25° entering angle for additional productivity gains when milling steel and cast iron workpieces. The new, high-feed version facilitates even higher metal-removal rates in applications with…
In a move designed to greatly improve efficiency and quality in CAM operations, CoroPlus ToolLibrary and PrimeTurning method from Sandvik Coromant have been integrated in Mastercam 2018. The CoroPlus suite of connected solutions from Sandvik Coromant facilitates digital machining, providing access…
New CoroMill Plura routers unveiled by Sandvik Coromant offer optimized milling and slotting operations in composite materials such as CFRP (carbon fiber reinforced plastic) and GFRP (glass fiber reinforced plastic). Production engineers, machine shop managers and operators will all benefit from…
PRODUCTS
