DC150 Perform 5 × Dc Drill

Contact Details

Walter USA LLC

Address

N22 W23977 RidgeView Pkwy. W.

Waukesha

53188

WI

United States

Map It

Phone

800-945-5554

Fax

262-347-2501

View Website

Send Email

View Buyers Guide

November 28, 2018

Walter has introduced the DC150 Perform 5 × D_cdrill, a versatile and cost-effective solid-carbide drill that can be used universally with all materials and with a broad range of workpieces. Like the others in the DC150 Perform Line, the new drill is suitable for use anywhere small and medium batch sizes need to be machined with high precision and process reliability coupled with a high level of cost efficiency and wide applicability.

The new DC150 Perform 5 × D_c is designed to be used without internal coolant. Proven features of the existing DC150 Perform drill family, such as wear-resistance and good chip evacuation, have been included in this latest entry, along with geometry which includes a 140° point angle for high positioning accuracy.

The new DC150 Perform 5 × D_csolid-carbide drill expands the existing range of DC150 Perform variants. Until now, the DC150 Perform Line included length to diameter ranges of 3, 5, 8, and 12 x D_c, all with internal coolant capability. The new 5 x D_c for external coolant complements the existing 3 x D_c, offering for external coolant and allows the end user to select the product which best fits the application and cost basis of the operation.

The new variant continues Walter’s vision for the Perform Line, which is "to offer customers the same outstanding Walter products, but without having to pay for a level of performance that’s not necessarily needed."

Related Glossary Terms

coolant
coolant
Fluid that reduces temperature buildup at the tool/workpiece interface during machining. Normally takes the form of a liquid such as soluble or chemical mixtures (semisynthetic, synthetic) but can be pressurized air or other gas. Because of water’s ability to absorb great quantities of heat, it is widely used as a coolant and vehicle for various cutting compounds, with the water-to-compound ratio varying with the machining task. See cutting fluid; semisynthetic cutting fluid; soluble-oil cutting fluid; synthetic cutting fluid.
point angle
point angle
Included angle at the point of a twist drill or similar tool; for general-purpose tools, the point angle is typically 118°.

Additional Products from Walter USA LLC

Walter Capto Clamping System

Walter USA LLC hasenhanced its versatile family of Xtra-tec Insert Drills with the addition of the Walter Capto clamping system and indexable inserts with Tiger-tec Silver cutting tool material.

X-treme Pilot 180 Drill

Walter has extended its range of pilot drills with addition of the X·treme Pilot 180.

Indexable Insert Cartridges for F2010 Facemill

Walter has introduced two new indexable insert cartridges for the Walter F2010 facemill.

DC150 Drills

The tough, versatile, and cost effective new Walter Titex DC150 family of solid-carbide drills brings Walter quality and reliability to the gritty world of everyday machining, where older machines, small quantities, and frequent workpiece changes is the order of the day.

Prototyp Supreme TC610 and TC611 Thread Mills

Walter has introduced the Walter Prototyp Supreme TC610 and TC611 solid-carbide thread mills, high performance tools that deliver significant increases in thread quality, milling productivity and process reliability while boosting tool life.

Walter Cut GX Tiger-tec Silver CVD Grooving, Parting Grades

Walter USA LLC has introduced three new Walter Cut GX Tiger-tec Silver CVD grooving and parting grades, the WKP13S, WKP23S and WKP33S, which are being introduced in combination with Walter's provden geometries UD4, UA4, UF4, RD4 and the plunge grooving and parting geometries GD3 and CE4.

Tiger-tec Silver Inserts

Walter has expanded its Tiger-tec Silver range of indexable inserts with three new ISO P geometries, all possessing a positive cutting edge design.

Cut-SX Single-Edged Grooving System

Walter has added additional sizes and designs to its Walter Cut-SX single-edged grooving system for grooving and parting.

M4000 Universal Milling System

Walter USA LLC has introduced the M4000, a universal milling system that improves production while reducing tooling requirements, thus reducing costs.

Prototyp Supreme MB265 and MB266 Milling Cutters

Walter has introduced the Walter Prototyp Supreme MB265 and MB266 solid-carbide milling cutters, two new milling tools that boost productivity due to their high metal-removal rates, while also increasing process reliability thanks to design features that act to enhance stability while…