Tungaloy Corp. announces the expansion of DrillForce-Meister, the series of interchangeable-tip drills. DrillForce-Meister is a tool series for large-diameter holemaking (drill diameters from 26.0 to 41.0 mm) that features two effective cutting edges for high speed and high productivity.
DrillForce-Meister’s clamping system uses a unique error proof asymmetric seat and a screw setting, which allows easy and swift head replacement by simply loosening and tightening the screw. Since a new drill head can be mounted without removing the drill body from the spindle, the full resetting and reindexing process is eliminated, shortening entire tool change time. By replacing the head screw regularly, the drill body can be used for an even longer period, reducing tooling cost and inventory requirements.
The drill head is supported by a wide contact area on the seat so the drill can withstand the high cutting force generated during high-feed drilling. The insert seat is designed with precision, providing excellent repeatability and minimizing run-out.
The cutting edge is prepared to increase coating adhesion of the highly reliable AH725 grade. Prolonged tool life is achieved with the smart combination of cutting edge geometry and grade property.
DrillForce-Meister will not only increase productivity but also reduces total machining cost by shortening tool change time and eliminating regrinding cost.
Engagement of a tool’s cutting edge with a workpiece generates a cutting force. Such a cutting force combines tangential, feed and radial forces, which can be measured by a dynamometer. Of the three cutting force components, tangential force is the greatest. Tangential force generates torque and accounts for more than 95 percent of the machining power. See dynamometer.
Additional Products from Tungaloy-NTK America, Inc.
DrillForce-Meister uses exchangeable drill tips designed to efficiently open large diameter holes ranging from 20.0 mm to 40.0 mm (.787″ – 1.575″) at a lower cost. With the drill tips being exchangeable, DrillForce-Meister not only eliminates the need for regrinding and recoating, as is the case…
TungMeister is designed to reduce a significant amount of tool changeover time through the ability to replace used heads instead of an entire tool. Since it takes no more than one minute for tool exchange, setup time can significantly be reduced to as short as one tenth of the time it would…
DeepTri-Drill is designed to provide productivity and application security for drilling deep holes on standard machining centers and CNC boring machines, while ensuring easy tool management by eliminating the need for regrinding. The insert features chip splitters that allows effective chip…
DrillMeister incorporates a unique self-locking interface that enables simple and secure drill head exchange. Since drill heads can be replaced without having to remove the drill body from the spindle tool setup time can significantly be reduced, eliminating presetting, offset, and touch off of the…
MillQuadFeed is a new generation of high feed milling cutters, offering two options of insert geometries that cover various high feed milling application needs. Versatile ZER geometry generates light cutting load at great depths of cut, enabling increased cutting depths and reduced number of…
This expansion includes two new TCL18 inserts with 1.75 mm and 2.5 mm thicknesses, expanding the existing line of 1.5 mm, 2.0 mm, and 3.0 mm inserts. The inserts are available in grade AH7025, a nano-multilayer PVD coating with high-aluminum content that provides hardness and adhesion to the grade…
TungForce-Feed features a large rake angle and positive inclination angle on the cutting edge that provide excellent chip control while reducing spindle loads and energy consumption. This allows a higher feed rate or greater depth of cut to be applied for improved efficiency and, by working in…
Setting the tool to the correct center height is one of the important factors to achieve the right dimension tolerances and surface integrity of the component. The new setting device enables easy, systematic, and accurate settings of tool center height. Its serrated interface with a magnetic…
The latest additions include inserts with 0.8 mm (.032″) nose radius in versatile AH725 grade. 0.8 mm nose radius will provide the cutting edge with strength, preventing edge fracture for predictable tool life. In addition, AH725 enhances the insert’s wear resistance during machining of various…
FH3125 is a new grade specifically developed to enhance the guide pad’s wear resistance in machining various materials. The dedicated carbide substrate of the grade is designed to reduce guide pad breakage, providing long and predictable tool life in deep hole processes. The corners of both ends of…
PRODUCTS
