Tungaloy expands the drill diameter range of the DrillMeister exchangeable-head drills to include diameters from 8.0 mm to 11.9 mm in 12xD body length.
DrillMeister features a unique self-locking interface that assures easy and secure drill head exchange. Since drill heads can be exchanged without removing the entire drill body from the spindle, setup time is significantly reduced, eliminating presetting, offset and touch-off of the replaced tool.
The drill head is mounted or removed from the body by simply twisting the head with a dedicated key wrench while on the machine spindle. In addition, the drill body features optimized helical flutes with a high helix angle and specially treated surface to efficiently evacuate chips from the cutting point to the outside. This makes the tool ideal for deep-hole drilling where chip evacuation is usually problematic.
At a Glance
New drill diameters ranging from 8.0 mm to 11.9 mm in 0.1 mm increments in 12xD body length
High helix angle and special surface treatment on the helical flutes for improved chip evacuation
Easy and secure drill head clamping thanks to innovative self-locking interface
High hole accuracy of solid drills is possible thanks to the drill head with margins
No need for regrinding. Eliminates costs for regrinding and reduces tool management and inventory
Since carbide shanks provide lower deflection than steel shanks, they enable aggressive machining with increased cutting parameters. This amounts to reduced machining time and increased productivity. Also, the new shanks provide excellent vibration resistance, enabling extremely productive…
AddMultiTurn provides the flexibility for OD, face, and profile turning operations in multi directions, which include high-feed back (pull) turning method, allowing toolpaths that turn in the opposite direction of conventional turning process at higher feeds. Multi-directional turning optimizes the…
DrillMeister is a super productive, accurate, and cost efficient exchangeable-head drill series. Its DMF counterboring drill head line now includes diameters from 20.0 mm to 25.9 mm, increasing the entire standard range from 6.0 mm to 25.9 mm (from .236″ to 1.020″).
Featuring superior cutting performance of solid carbide drills and the ease-of-use of the DrillMeister exchangeable head drill series, AddMeisterDrill small-diameter exchangeable head drills allow quick and secure exchanges of extremely small drill heads thanks to its dedicated key. In addition,…
The new LNMU0303UER inserts are designed to provide a smaller approach angle than existing LNMU0303ZER inserts when set on the cutter body so that the insert generates thin chips. This chip thinning effect reduces cutting loads, minimizing damage on the cutting edges during machining of exotic…
New parting inserts are offered in the JXPS style : a 0.6 mm (.024″) width insert is designed for maximum parting diameter (CUTDIA) of 6 mm (.236″) and a 0.8 mm (.031″) width insert for 12 mm (.472″) CUTDIA, both furnished with pressed chipbreaker. This intricate chipbreaker creates optimally…
The MiniForce-Turn series offers innovative double-sided turning inserts with positive rake cutting edges on both sides. These proven inserts are capable of soft cutting action similar to that of positive inserts with an added advantage of double cutting edges.
AH3225 consists of the latest nano multi-layer coating technology with three major properties with excellent coating substrate adhesion for a high level of wear and fracture resistance. Integrating a dedicated carbide substrate with excellent thermal property provides the grade with increased…
The small size-04 inserts also allow TungForce-Rec04 to have a higher teeth density than conventional shoulder cutters of the same size, boasting two teeth for an 8 mm diameter cutter and three for a 10 mm. This allows TungForce-Rec04 to run higher feed speed than competitors when being fed at the…
For job shops that are mass-producing small parts with Swiss lathes, minimizing material waste in the part-off process can be an extremely effective solution for cost savings. The 1.2 mm-wide (.047″-wide) grooving inserts can reduce the material waste produced by parting-off by up to 40% when…
PRODUCTS
