Tungaloy expands the drill diameter range of the DrillMeister exchangeable-head drills to include diameters from 8.0 mm to 11.9 mm in 12xD body length.
DrillMeister features a unique self-locking interface that assures easy and secure drill head exchange. Since drill heads can be exchanged without removing the entire drill body from the spindle, setup time is significantly reduced, eliminating presetting, offset and touch-off of the replaced tool.
The drill head is mounted or removed from the body by simply twisting the head with a dedicated key wrench while on the machine spindle. In addition, the drill body features optimized helical flutes with a high helix angle and specially treated surface to efficiently evacuate chips from the cutting point to the outside. This makes the tool ideal for deep-hole drilling where chip evacuation is usually problematic.
At a Glance
New drill diameters ranging from 8.0 mm to 11.9 mm in 0.1 mm increments in 12xD body length
High helix angle and special surface treatment on the helical flutes for improved chip evacuation
Easy and secure drill head clamping thanks to innovative self-locking interface
High hole accuracy of solid drills is possible thanks to the drill head with margins
No need for regrinding. Eliminates costs for regrinding and reduces tool management and inventory
BXA10 incorporates a crater-wear-resistant PcBN substrate and the latest multilayer PVD coating for edge toughness, enhancing the grade’s wear and fracture resistance. The latest development will provide improved productivity, tool life, and surface integrity in continuous to light interrupted cuts…
DrillForce-Meister incorporates a unique seat design that enables easy and swift drill head exchanges, while maximizing the clamping security, making drilling easy on curved surfaces, inclined exits, or components with a stability problem. The seat is designed with a maximum possible contact…
DrillMeister incorporates a unique self-locking interface that enables simple and secure drill head exchange. Since drill heads can be replaced without having to remove the drill body from the spindle, tool setup time can significantly be reduced, eliminating presetting, offset, and touch-off of…
TungTurn-Jet toolholders deliver coolant strategically to the optimum position close to the cutting point of the insert. This significantly improves chip control when machining exotic materials that are prone to smearing by effectively breaking the chips into pieces and guiding them away from the…
DuoJust-Cut features innovative insert clamping ensuring tool rigidity and stability in various parting operations. In addition to existing JXPG insert with a ground in chipbreaker on the rake face, the new JXPS insert incorporates a 3D chipbreaker pressed in to its “dual-rake” cutting edge which…
This AH9130 grade expansion encompasses the DMP line of general-purpose drilling, succeeding the popular DMC drill head for precision drilling. Developed for drilling applications, AH9130 is a nano-multilayer PVD coating consisting of three distinctive layers.
DrillMeister offers the TIDCF chamfering holder that can be attached to the TID drill shank allowing chamfering and drilling in a single pass for reduced machining times. The chamfering inserts are available for 30°, 45°, and 60° chamfers. The new TIDCF holder line can accommodate smaller drills in…
AH8015 consists of a nano-multilayered PVD coating with high aluminum content. This coating characteristic provides increased resistance against wear and built-up edge over existing grades, enabling long and predictable tool life during the machining of heat resistant superalloys and stainless…
Designed for the internal grooving of bores with diameters as small as 8.0 mm (.315″) up to 24.0 mm (.945″), while promising reliable chip evacuation. The shanks are made of either steel for economy or tungsten carbide for long reach areas where tool steadiness is vital. Virtually eliminate chip…
The TungTurn-Jet system strategically directs the internal coolant jet exactly where it is needed, close to the cutting point on the insert rake face. This dramatically improves chip control during the machining of difficult-to-cut materials, which is not the case with conventional coolant delivery…
PRODUCTS
