FINE BEAM Inserts

Contact Details

Tungaloy-NTK America, Inc.

Address

3726 N. Ventura Dr.

Arlington Heights

60004

IL

United States

Map It

Phone

630-227-3700

Toll Free Phone

888-554-8394

Fax

888-554-8392

View Website

Send Email

View Buyers Guide

June 04, 2020

FINE BEAM Inserts Improve Deep Hole Drilling Productivity

FINE BEAM incorporates precision insert and guide pad designs to make it possible for high precision deep hole drilling at high speeds and feeds.

The latest additions include inserts with 0.8 mm (.032″) nose radius in versatile AH725 grade. 0.8 mm nose radius will provide the cutting edge with strength, preventing edge fracture for predictable tool life. In addition, AH725 enhances the insert’s wear resistance during machining of various materials, ensuring high precision and boosts productivity.

At a Glance

0.8 mm nose radius provides the cutting edge with fracture resistance, preventing micro-chipping on the cutting edge
AH725 grade provides tool life predictability in machining various materials
Productive solution for producing high precision deep holes
5 new inserts are added in this expansion

Related Glossary Terms

wear resistance
wear resistance
Ability of the tool to withstand stresses that cause it to wear during cutting; an attribute linked to alloy composition, base material, thermal conditions, type of tooling and operation and other variables.

Additional Products from Tungaloy-NTK America, Inc.

DrillForce-Meister Line With Smaller Drill Diameters

DrillForce-Meister Line of Indexable Head Drills in Range of Diameters

DrillForce-Meister incorporates a unique seat design that enables easy and swift drill head exchanges, while maximizing the clamping security, making drilling easy on curved surfaces, inclined exits, or components with a stability problem. The seat is designed with a maximum possible contact…

DrillMeister 12xD Drill Body

DrillMeister incorporates a unique self-locking interface that enables simple and secure drill head exchange. Since drill heads can be replaced without having to remove the drill body from the spindle, tool setup time can significantly be reduced, eliminating presetting, offset, and touch-off of…

10x12 mm TungTurn-Jet Toolholders

TungTurn-Jet toolholders deliver coolant strategically to the optimum position close to the cutting point of the insert. This significantly improves chip control when machining exotic materials that are prone to smearing by effectively breaking the chips into pieces and guiding them away from the…

DuoJust-Cut’s JXPS Insert

DuoJust-Cut features innovative insert clamping ensuring tool rigidity and stability in various parting operations. In addition to existing JXPG insert with a ground in chipbreaker on the rake face, the new JXPS insert incorporates a 3D chipbreaker pressed in to its “dual-rake” cutting edge which…

Expansion of Grade AH9130 to DMP Drill Head Line

DMP drill head are expanded in diameters from 10.3 mm through 19.8 mm

This AH9130 grade expansion encompasses the DMP line of general-purpose drilling, succeeding the popular DMC drill head for precision drilling. Developed for drilling applications, AH9130 is a nano-multilayer PVD coating consisting of three distinctive layers.

DrillMeister Chamfering Holders

DrillMeister offers the TIDCF chamfering holder that can be attached to the TID drill shank allowing chamfering and drilling in a single pass for reduced machining times. The chamfering inserts are available for 30°, 45°, and 60° chamfers. The new TIDCF holder line can accommodate smaller drills in…

FineBeam BTA Drill Series AH8015 Grade Inserts

FineBeam BTA drill series to include AH8015 grade inserts with the G style chip former.

AH8015 consists of a nano-multilayered PVD coating with high aluminum content. This coating characteristic provides increased resistance against wear and built-up edge over existing grades, enabling long and predictable tool life during the machining of heat resistant superalloys and stainless…

SNG Coolant-Through Holders

Designed for the internal grooving of bores with diameters as small as 8.0 mm (.315″) up to 24.0 mm (.945″), while promising reliable chip evacuation. The shanks are made of either steel for economy or tungsten carbide for long reach areas where tool steadiness is vital. Virtually eliminate chip…

TungTurn-Jet System

The TungTurn-Jet system strategically directs the internal coolant jet exactly where it is needed, close to the cutting point on the insert rake face. This dramatically improves chip control during the machining of difficult-to-cut materials, which is not the case with conventional coolant delivery…

Parting Blade CGP32-CHP

Tungaloy expands its TungCut series of grooving tools to include a parting blade CGP32-CHP with the ability to internally supply high-pressure coolant.