HGAIR/L and HFAIR/L Face Grooving Adapters

Contact Details

Iscar USA

Address

300 Westway Place

Arlington

76018

TX

United States

Map It

Phone

817-258-3200

Toll Free Phone

877-BY-ISCAR

Fax

817-258-3221

View Website

Send Email

View Buyers Guide

January 01, 2014

ISCAR is further extending the application range of the current HGAIR/L and HFAIR/L face grooving adapters. This range applies to both diameters and grooving depths of 3 to 6mm inserts.

The new adapters were designed mainly to cover the larger diameters and deeper grooving range which was not covered by the currently available tools. They should be applied on larger parts such as pump hubs, hydraulic parts, turbine parts, engine pistons, etc.

Related Glossary Terms

grooving
grooving
Machining grooves and shallow channels. Example: grooving ball-bearing raceways. Typically performed by tools that are capable of light cuts at high feed rates. Imparts high-quality finish.

Additional Products from Iscar USA

Dove IQ MILL 845

Face Mills Carrying Double-Sided Square Inserts

High positive cutter pocket inclination. Rigid clamping due to dovetail pocket design secured by clamping screws. Coarse and fine pitch cutter configurations. Coolant holes directed to every insert on the cutters. Precise double-sided square insert. Eight cutting edges – each edge comprises a…

Trideep

Gundrill and Deep Drilling Heads Carrying Inserts with 3 Edges

Deep drills with a 3 cutting edged insert (other manufacturers only offer inserts with 1 or 2 cutting edges). Highly accurate peripherally ground insert, provides high hole diameter accuracy of IT10.
The chip splitter produces narrow chips for efficient chip evacuation, enabling high feed…

JETCROWN

Two coolant through tools with top and bottom outlets for output pressure of up to 340 bars.
Significantly improves insert tool life. Quick, change fast and easy adapter indexing. User-friendly with a single clamping screw. No set-up time after blade or pocket indexing. Can be used next to…

CHAM-IQ-DRILL

The CHAM-IQ-DRILL design body is produced from special steel for high durability and a special stopper prevents the drilling head from being extracted upwards from the pocket. Long stoppers provide high resistance to cutting forces, enabling applications under very high cutting conditions.
…

SumoCham

SumoChan Drills Feature 12xD Depth to Diameter Ratio

The DCN drills feature cylindrical shanks, which enable clamping of the drill in hydraulic toolholders (most recommended) or in spring collets. All drill bodies feature helical coolant holes. Prior to using the 12xD drill, it is recommended to drill a pre-hole by using a DCN 1.5xD drill or a…

Logiq4Turn

The double-sided CXMG inserts operate similarly to CCMT positive inserts and can therefore replace standard CCMT inserts. In some applications, they can also replace standard negative CNMG inserts.
Double-sided with a positive flank. Low cutting forces. Designed with a chipformer for general…

LOGIQ-4-FEED

These inserts have 4 types of cutting geometries for machining different materials under diverse cutting conditions: T - Steel, ferritic and martensitic stainless steel, cast iron and hardened steel. HP - Austenitic stainless steel and high temperature alloys. RM-T - Interrupted cut for machining…

Pentacut HP Jet Line of Multifunction Tools

The Pentacut HP Jet line from Iscar Metals Inc. combines the cost-effective Pentacut—which can be used in multifunction applications, including grooving, parting, recessing and chamfering—with innovative high-pressure coolant technology.

Heli Tang T490 Milling Cutter

Iscar Metals Inc.’s Heli Tang T490 milling cutter for roughing accepts inserts with serrated, chip-splitting grooves. These grooves can improve performance when the machine power is limited or when evacuating chips from narrow slots or deep cavities, according to the company.

PiccoAce Small-Diameter Cutting Tools

The increased popularity of Swiss-style machine tools and the need for fast tool indexing with high repeatability and precision has inspired Iscar Metals to develop small-diameter cutting tools with precision indexing. The new PiccoAce system allows easy quick and easy clamping with modularity…