HGAIR/L and HFAIR/L Face Grooving Adapters

Contact Details

Iscar USA

Address

300 Westway Place

Arlington

76018

TX

United States

Map It

Phone

817-258-3200

Toll Free Phone

877-BY-ISCAR

Fax

817-258-3221

View Website

Send Email

View Buyers Guide

January 01, 2014

ISCAR is further extending the application range of the current HGAIR/L and HFAIR/L face grooving adapters. This range applies to both diameters and grooving depths of 3 to 6mm inserts.

The new adapters were designed mainly to cover the larger diameters and deeper grooving range which was not covered by the currently available tools. They should be applied on larger parts such as pump hubs, hydraulic parts, turbine parts, engine pistons, etc.

Related Glossary Terms

grooving
grooving
Machining grooves and shallow channels. Example: grooving ball-bearing raceways. Typically performed by tools that are capable of light cuts at high feed rates. Imparts high-quality finish.

Additional Products from Iscar USA

HYDRO-SURE Adapters

ISCAR is introducing unique chucks that combine user-friendly hydraulic clamping with side screw clamping for Weldon type shank tools.

HELIQMILL 390 Milling Tools

ISCAR introduces the ISCAR HELIQMILL 390 line, a new step of development of the insert with helical cutting edge.

HELIDO S890 Facemills

Iscar Metals' HELIDO S890 FSN is a new family of right-hand indexable face mills with an 88°Cutting edge angle (2 degree lead) with 8 helical cutting edges, which can be used for up to 9mm depth of cut.

IC806 Grade

ISCAR is introducing the IC806 — a new complementary SUMO TEC PVD coated grade for machining high temperature alloys, especially Inconel 718.

MINCUT Inserts

ISCAR is expanding the range of MINCUT inserts and tools for face grooving and turning in a diameter range of 10 to 34mm, for up to 9mm grooving depth.

IC6015 and IC6025 Grade

Following the introduction of grade IC6015, ISCAR is introducing an additional new, SUMO TEC CVD coated grade, IC6025, which was developed for machining stainless steel at moderate cutting speeds for stable or unstable conditions.

CHAMGUN Drill

Deep hole drilling is very popular in the automotive, die and mold and aerospace industries. ISCAR took the gundrill technology one step further when developing the new CHAMGUN for deep hole drilling; this is a gundrill that enables the replacement of drilling heads while the driver is still…