Sandvik Coromant introduces a range of new insert geometries and customized tool holders, featuring fixed nozzles that guarantee a precise coolant jet flow to get right to the center of the cutting zone.
The coolant flows from the pump to the tool through nozzles directed exactly at the cutting zone. This produces a wedge of coolant that efficiently removes the heat from the cutting zone and forms the chip. Improved chip control and longer tool life are just two of the benefits which contribute to secure, predictable machining and preventing unplanned machine stoppages.
Increased productivity can even be achieved in tricky applications and in materials which are difficult to machine, regardless of the pressure you use.
When using low pressure of 5 to 30 bars (72 to 435 psi) – the new Sandvik Coromant HP holders outperform regular tool holders which can have a tendency to flood coolant.
At higher coolant pressures, above ~30 bars (435 psi), the new insert geometry collects the coolant jets to form an even, powerful wedge that breaks the chips, cools the insert and improves the insert tool life. The higher the pressure, the more difficult materials and applications can be machined with excellent results.
The Sandvik Coromant advanced cooling technology has until now been a solution primarily for customers using quick change with Coromant Capto, SL- and QS holding system. Now, the same premium technology can be applied with general shank tools, making it possible for everyone working with wet machining to utilize this highly productive coolant solution, even in small lathes.
Fluid that reduces temperature buildup at the tool/workpiece interface during machining. Normally takes the form of a liquid such as soluble or chemical mixtures (semisynthetic, synthetic) but can be pressurized air or other gas. Because of water’s ability to absorb great quantities of heat, it is widely used as a coolant and vehicle for various cutting compounds, with the water-to-compound ratio varying with the machining task. See cutting fluid; semisynthetic cutting fluid; soluble-oil cutting fluid; synthetic cutting fluid.
Sandvik Coromant offers tooling dedicated to the challenging operation of machining valve seat pockets in oil and gas applications. Composed of a combination of an elliptical Silent Tools adapter and CoroTurn SL cutting head, this tool is designed to overcome prevalent issues such as narrow flow…
The new CoroMill 316 generation of exchangeable-head milling cutters from Sandvik Coromant further expands the company’s established solid, round tools portfolio by bringing higher levels of versatility and productivity to machining operations in ISO P (steel) and ISO M (stainless steel) materials…
Machine shops faced with identifying ways of achieving secure machining with long and predictable insert life in steel milling operations can turn to GC1130, an insert made with the Zertivo, a unique production technology from Sandvik Coromant. GC1130 helps to overcome challenging machining…
Offering high productivity and a low cost per edge, the CoroMill 745 from Sandvik Coromant has a double-sided, multiedge design that is ideal for large batch productions. With its tilted insert positioning system and sharp cutting edges, this milling cutter offers a light cutting action at low…
When material savings are a requirement due to machining expensive materials, large batch productions or both, it is essential to use the thinnest insert width possible. CoroCut QD dedicated parting off and deep grooving tools from Sandvik Coromant Co. are available in small insert widths with…
For longitudinal and face turning, Sandvik Coromant introduces the CoroTurn 300 for higher component quality, increased handling efficiency and longer tool life in steel turning operations. The CoroTurn 300 features stable insert clamping, as well as eight-edged inserts for the high chip control,…
Sandvik Coromant Co. says the GC4305-grade insert maximizes metal-removal rates, shortens processing times and enhances component quality when turning steel. It is made of a heat-resistant cutting material that is suitable for dry machining, which is ideal for automotive part manufacturers that…
Sandvik Coromant recently introduced a new endmill for small diameters, the CoroMill 390 with size 07 inserts is said to be a versatile cutter ideal for shoulder milling, deep shoulder milling, edging, linear and helical ramping, plunge milling, slot milling and face milling, according to the…
With CoroMill 425, Sandvik Coromant offers an eight-edge finishing tool designed for face milling that greatly improves metal removal rate and tool life in the ISO K application area. Due to its innovative setting system, it is particularly user-friendly.
PRODUCTS
