M714B T-CBN Grade Inserts

Contact Details

Tungaloy-NTK America, Inc.

Address

3726 N. Ventura Dr.

Arlington Heights

60004

IL

United States

Map It

Phone

630-227-3700

Toll Free Phone

888-554-8394

Fax

888-554-8392

View Website

Send Email

View Buyers Guide

March 18, 2020

Exclude Glossary Terms

cubic boron nitride (CBN)

cutting speed

polycrystalline cubic boron nitride (PCBN)

superalloys

wear resistance

Tungaloy is introducing the M714B T-CBN grade for finish machining of heat-resistant superalloys. M714B contains submicron sized fine CBN grains and alumina as a binder providing the grade with high thermal stability. This composition enables high speed applications in Ni-base superalloys such as Inconel 718, ensuring higher machining efficiency than conventional grades. The grade’s uniform matrix of CBN and binder provides high surface finishing quality at high cutting parameters.

Manufacturers of critical components for aerospace industries face strict requirements of finished surface integrity as process security and quality are of utmost importance. The new M714B grade is available in two styles of edge preparations optimized for maximum surface integrity: LS offers a lightly chamfered and honed cutting edge commonly found in PCBN inserts intended for HRSAs; while E style provides a lightly honed cutting edge where low cutting forces are essential. M714B offers cutting edge preparations that are tailored to optimize performance in the targeted areas, while also enabling process security and efficiency in high temperature and high cutting speed conditions.

At a glance:

High thermal stability enables high-speed machining with exceptional wear resistance

Available in two types of edge preparations: “LS” with a light chamfered and honed edge, while “E” offers a lightly honed cutting edge

Total of 24 inserts to be introduced

Related Glossary Terms

cubic boron nitride ( CBN)
cubic boron nitride ( CBN)
Crystal manufactured from boron nitride under high pressure and temperature. Used to cut hard-to-machine ferrous and nickel-base materials up to 70 HRC. Second hardest material after diamond. See superabrasive tools.
cutting speed
cutting speed
Tangential velocity on the surface of the tool or workpiece at the cutting interface. The formula for cutting speed (sfm) is tool diameter 5 0.26 5 spindle speed (rpm). The formula for feed per tooth (fpt) is table feed (ipm)/number of flutes/spindle speed (rpm). The formula for spindle speed (rpm) is cutting speed (sfm) 5 3.82/tool diameter. The formula for table feed (ipm) is feed per tooth (ftp) 5 number of tool flutes 5 spindle speed (rpm).
polycrystalline cubic boron nitride ( PCBN)
polycrystalline cubic boron nitride ( PCBN)
Cutting tool material consisting of polycrystalline cubic boron nitride with a metallic or ceramic binder. PCBN is available either as a tip brazed to a carbide insert carrier or as a solid insert. Primarily used for cutting hardened ferrous alloys.
superalloys
superalloys
Tough, difficult-to-machine alloys; includes Hastelloy, Inconel and Monel. Many are nickel-base metals.
wear resistance
wear resistance
Ability of the tool to withstand stresses that cause it to wear during cutting; an attribute linked to alloy composition, base material, thermal conditions, type of tooling and operation and other variables.

Additional Products from Tungaloy-NTK America, Inc.

Expanded Line of DrillMeister Exchangeable-Head Drills

DrillMeister features simple and swift drill head indexing due to its self-clamping system. Tool replacement is easy: just replace the drill head. There is no need to remove the entire drill body from the toolholder and re-adjust the tool overhang, thus reducing a large amount of tool change time.

TungTurn-Jet Turning Tool System

Tungaloy Corp. has expanded the TungTurn-Jet line, the turning tool system with high-pressure coolant capability. Until now, coolant was simply applied by flooding the cutting area, which can cause chips generated during machining to interfere with the coolant flow, preventing it from reaching the…

TetraMini-Cut Threading Inserts

Tungaloy Corp. added threading inserts with sharp cutting edges to its TetraMini-Cut insert series, which allows undercutting and finishing of a flange wall. Complemented by the new PVD grade, SH725, TetraMini-Cut’s new threading insert features sharp cutting edges, making it suitable for cutting…

DeepTriDrill Indexable-Insert Gundrills

Tungaloy Corp. further expands its indexable-insert gundrill line, DeepTriDrill, with options down to a diameter range of 14-15.9 mm. Deep-hole drilling is a challenging operation and often creates a bottleneck in holemaking shops around the globe.

DuoJustCut Parting Tool

Tungaloy America Inc. offers the DuoJustCut parting tool for Swiss-style lathes. The clamping system rigidly clamps inserts, and the optimized overhang length delivers stable and productive machining, according to the company.

TungTri-Shred Shoulder Milling Cutter

Tungaloy Corp. introduces TungTri-Shred, a new shoulder milling cutter for highly productive machining. With today’s dramatic growth in the performance of machine tools, high-speed machining is often the first choice for manufacturers.

DoMini-Mill Copy Mill

DoMini-Mill is a copy mill developed for semifinishing operations, featuring Tungaloy’s latest H-class insert. The economical six-cornered insert with dovetail clamp technology has a double-sided geometry, yet positive flanks, providing sharpness and high cutting edge strength simultaneously.

MillQuadFeed High-Feed Milling Cutter

Tungaloy Corp. offers MillQuadFeed, a new high-feed milling cutter. With a depth of cut up to 0.098” (2.5mm) and a feed rate up to 0.078” (2.0mm) per tooth, MillQuadFeed accomplishes astounding metal-removal rates in rough milling operation, according to the company.

DoTriple-Mill Facemilling Cutter

DoTriple-Mill is Tungaloy’s latest facemilling cutter, featuring an innovative dovetail clamping system that will reportedly dramatically reduce insert lift up and excessive shear force imposed on the screws during heavy-duty milling. Compared with the last generation of facemilling platforms,…

TungForce-Rec Indexable Miniature Shoulder Milling Cutter

Tungaloy Corp. offers TungForce-Rec, the indexable miniature shoulder milling cutter. The TungForce-Rec insert has a unique V-shaped bottom to enhance the insert’s resistance to centrifugal force, assuring reliability and high productivity during high-speed machining, according to the company.