Tungaloy is expanding its TFE series, a long-running range of facemilling cutters for finishing applications, to incorporate bodies with insert adjustable pockets, achieving near zero axial runout for superior surface finishing results.
In addition to productivity, the TFE cutters are engineered for precision in facemilling. The TFE series carries a wide spectrum of coated and uncoated insert grades, geometries and cutting edge preparations for enhanced surface finishing potential and burr-free edges on the workpieces.
In response to heightening demands for precision finish, the TFE series now features adjustable pockets to eliminate axial runout of the inserts. The screw and wedge located right beneath each insert pocket are used to axially adjust the insert heights to a tolerance of ±0.065 mm (±0.0026”). This allows not only finer surface quality on the workpieces, but also to uniform the wear progression on all the inserts in the cutter, thus facilitating the insert life management.
The new adjustable cutters use existing TFE inserts which are available in a range of grades and geometries for a variety of materials and applications: coated carbide grade AH120 for steel and cast iron, AH140 for stainless steel, DS1100 with chipbreakers for nonferrous materials; cermet grade NS740 for steel; uncoated KS05F grade for nonferrous applications; and DX140, a PCD-tipped format for a nonferrous, high parameter solution.
The standard cutter bodies are available in the bore (shell mill) style only, with outer diameters of 80 mm (3.15”), 100 mm (4”), and 125 mm (5”). Specials are available upon request.
Form of milling that produces a flat surface generally at right angles to the rotating axis of a cutter having teeth or inserts both on its periphery and on its end face.
DrillForce-Meister uses exchangeable drill tips designed to efficiently open large diameter holes ranging from 20.0 mm to 40.0 mm (.787″ – 1.575″) at a lower cost. With the drill tips being exchangeable, DrillForce-Meister not only eliminates the need for regrinding and recoating, as is the case…
TungMeister is designed to reduce a significant amount of tool changeover time through the ability to replace used heads instead of an entire tool. Since it takes no more than one minute for tool exchange, setup time can significantly be reduced to as short as one tenth of the time it would…
DeepTri-Drill is designed to provide productivity and application security for drilling deep holes on standard machining centers and CNC boring machines, while ensuring easy tool management by eliminating the need for regrinding. The insert features chip splitters that allows effective chip…
MillQuadFeed is a new generation of high feed milling cutters, offering two options of insert geometries that cover various high feed milling application needs. Versatile ZER geometry generates light cutting load at great depths of cut, enabling increased cutting depths and reduced number of…
DrillMeister incorporates a unique self-locking interface that enables simple and secure drill head exchange. Since drill heads can be replaced without having to remove the drill body from the spindle tool setup time can significantly be reduced, eliminating presetting, offset, and touch off of the…
This expansion includes two new TCL18 inserts with 1.75 mm and 2.5 mm thicknesses, expanding the existing line of 1.5 mm, 2.0 mm, and 3.0 mm inserts. The inserts are available in grade AH7025, a nano-multilayer PVD coating with high-aluminum content that provides hardness and adhesion to the grade…
TungForce-Feed features a large rake angle and positive inclination angle on the cutting edge that provide excellent chip control while reducing spindle loads and energy consumption. This allows a higher feed rate or greater depth of cut to be applied for improved efficiency and, by working in…
FH3125 is a new grade specifically developed to enhance the guide pad’s wear resistance in machining various materials. The dedicated carbide substrate of the grade is designed to reduce guide pad breakage, providing long and predictable tool life in deep hole processes. The corners of both ends of…
Setting the tool to the correct center height is one of the important factors to achieve the right dimension tolerances and surface integrity of the component. The new setting device enables easy, systematic, and accurate settings of tool center height. Its serrated interface with a magnetic…
The latest additions include inserts with 0.8 mm (.032″) nose radius in versatile AH725 grade. 0.8 mm nose radius will provide the cutting edge with strength, preventing edge fracture for predictable tool life. In addition, AH725 enhances the insert’s wear resistance during machining of various…
PRODUCTS
