Walter USA LLC has introduced the Walter Titex XD70, a solid carbide drill that employs design and manufacturing innovations that bring new levels of productivity to the drilling of extremely deep holes.
The Walter Titex XD70 (the XD designation stands for "extremely deep") can produce holes up to a remarkable 70xD in one operation, and does not require pecking. Previous XD technology product offerings topped out at 30xD.
Along with its design, manufacturing innovations have contributed to the 70xD's increase in performance. Walter is using a new method of producing solid carbide blanks, making it possible to efficiently manufacture this type of long solid carbide drill. In addition, a special grinding process is also employed.
As is the case with all XD drills, cooling for the XD70 is provided via internal coolant channels. However, despite the great drilling depth, no special coolant equipment, such as an external high-pressure system, is required.
A standard cooling unit, such as those available with any machining center, is sufficient. The XD70 technology is currently being offered as a special tool, in diameters ranging from 5 to 12mm. Two tip coatings are available depending on the workpiece material: TTP for steels and XPL for cast iron.
Fluid that reduces temperature buildup at the tool/workpiece interface during machining. Normally takes the form of a liquid such as soluble or chemical mixtures (semisynthetic, synthetic) but can be pressurized air or other gas. Because of water’s ability to absorb great quantities of heat, it is widely used as a coolant and vehicle for various cutting compounds, with the water-to-compound ratio varying with the machining task. See cutting fluid; semisynthetic cutting fluid; soluble-oil cutting fluid; synthetic cutting fluid.
Machining operation in which material is removed from the workpiece by a powered abrasive wheel, stone, belt, paste, sheet, compound, slurry, etc. Takes various forms: surface grinding (creates flat and/or squared surfaces); cylindrical grinding (for external cylindrical and tapered shapes, fillets, undercuts, etc.); centerless grinding; chamfering; thread and form grinding; tool and cutter grinding; offhand grinding; lapping and polishing (grinding with extremely fine grits to create ultrasmooth surfaces); honing; and disc grinding.
Available in lengths of 6, 8, and 10 x Dc and boring bar diameters of 1.25, 1.50, and 2.00 in. (32, 40, and 50 mm) with additional sizes and lengths available on request. Capto C6, C8 connections along with HSK100T connections are also offered as standards. The new boring bars feature compact,…
The GD8 geometry has been specifically developed for grooving along the shoulders and grooving of large diameters without interference of the insert with the finished workpiece. The VG8 geometry has been developed for finishing operations behind a collar.
The G4014-P groove turning holder makes it possible to change inserts in the machine – even where space is limited—in particular on long center lathes and multi-spindle machines. As a result, changing inserts is approximately 70% faster.
Walter has launched the new Xtra·tec XT M5008, an indexable high-feed milling cutter in the diameter range of 5/8–2½ in. (16–66 mm) that permits high feed per tooth at low axial depths of cut. Application areas range from pocketing, grooving and surface machining.
Walter has introduced the MU5 double-sided indexable insert for turning operations. The insert can be used universally both for steel forged parts and also for stainless materials.
Walter has introduced the TC410 Advance HSS-E thread former, a versatile new TiN-coated threading tool that’s cost-effective even for small and medium batch sizes. It can be used universally for blind-hole and through-hole threads in most materials having a primary application in ISO material…
Walter has added Walter Capto toolholders and insert widths to its Walter Cut MX grooving system. Capto toolholders feature enhanced rigidity and modularity, while the tapered polygonal shape handles both torsional and bending forces with ease. This interface can be used for lathes and turn/mill…
Walter has introduced the MC232 Perform line of solid-carbide milling cutters. These milling cutters, the latest addition to Walter’s cost-effective Perform product range, feature a corner radius and reduced neck. Solid-carbide milling cutters with corner radii allow improved approaches to…
Walter has introduced the T2713, a universal indexable thread mill suitable for a variety of materials up to 55 HRC. This newest addition to the Walter thread milling system combines the advantages of thread milling with the efficiency of tapping. Due to the smooth cutting and lower cutting forces…
Walter has added PCD grooving inserts to its Walter Cut GX grooving system, the innovative tool technology for grooving and parting off. These new geometries, straight edge (F1) and full radius (M1) excel at grooving in aluminum and titanium alloys, bringing high cutting speed, longer tool life and…
PRODUCTS
