BIG KAISER’s UNIFLEX system is a 3D zero-point clamping system designed to allow parts with curved surfaces to be held rigidly for various operations and be adjusted to different height requirements. The UNIFLEX system is available in two diameters: 25.4mm and 50mm.
BIG KAISER is accelerating workholding technology to match the level of the ever-more popular and accessible multiaxis machining. The UNIFLEX system is composed of a clamping ball and collar that are attached to the underside of a part or fixture. The clamping ball is a hardened steel ball of the same type found in heavy-duty industrial bearings. This material prevents peening or denting of its surface with normal use.
Once the clamping ball and collar are attached, the part and fixture are then lowered onto either a clamping base or a clamping extension. The clamping collar is then rotated to tighten the six bearing balls on to the main ball. If the part or fixture is warped or needs to be set at an angle, the clamping ball can pivot up to 15° of the vertical with 18mm of height adjustability or 40° with 20mm of height adjustability.
The UNIFLEX System 50mm has an increased clamping ball size, which allows it to work with larger, heavier, uneven parts and provides more rigidity. Balls are offered in two types: location type, which uses a 25mm-dia. location collar, while a grip type has serrations to grab the part. Grip type is not to be used on finished surfaces.
This system provides vibration-free holding of the part when multiple clamping is used and has low-wear against tools. It also can stabilize the workpieces without obstructing access to the top and sides of the part. The two sizes available enable users to work with small or large workpieces like weldments and castings.
BIG KAISER is expanding its range of BIG Capto toolholders with the addition of a new size, C4, which is becoming increasingly popular as a quick-change system for turret tooling on lathes.
BIG KAISER says its hydraulic chucks for Swiss-type lathes are the first improvement to this technology in more than 30 years. These toolholders use a single wrench, which makes for a quick and easy change of the cutting tools on a gang slide.
BIG KAISER introduces two versions of the C-Centering Cutter, a multifunction cutter capable of spot drilling, centering and chamfering. The C-Centering Cutter is an indexable cutter that uses a specialized insert that can start a hole from a solid piece, something extremely difficult to do. It can…
BIG KAISER presents the Torque Fit, a tightening fixture for collet chucks with an integrated torque measuring system. This device makes it easy to ensure that a collet chuck is correctly tightened.
BIG KAISER Precision Tooling Inc. has added the Dyna Contact to its product offering. The ceramic taper gage allows inspection of machine spindle tapers at a glance.
BIG KAISER announced its new Level Master Wireless, a high-precision device for the leveling of machine tool tables. The Level Master Wireless adds wireless connectivity to enable leveling information to be read from a separate display device, making it easier to ensure that a precision level is…
The precision and ruggedness of BIG KAISER boring heads deliver measurable performance advantages, significantly reducing finishing cost and cycle time. This is proven through the development of the EWE digital boring head.
BIG KAISER announces its HDC Straight Shank holder to the market, used for increased versatility. The slim design provides superior balance, concentricity and is suitable for reaching into confined areas.
BIG KAISER introduces the Base Master Red, a high-precision touch sensor that rapidly determines workpiece offsets and tool lengths, and the Base Master Mini, a thin, compact tool offset sensor.
BIG KAISER has introduced the R-Cutter CKB Type, a new modular round chamfering tool. The R-Cutter CKB3 and CKB5 is an ultrahigh-feed front and back radius chamfering mill, which features high rake angles that reduce cutting resistance and minimize burr generation.
PRODUCTS
