Walter has added indexable inserts to the range of products available via the Walter Xpress fast delivery service. Previously the special custom solutions available with Walter Xpress had been limited to round tools and tools that hold indexable inserts.
Additionally, the tools were required to be “close to the standard tools.” Now, Walter offers its customers the benefits of Xpress for indexable inserts too. These benefits include short delivery times of three to four weeks, depending on the product. These special inserts then allow customers to reduce the total number of tools required to finish a component and provide greater certainty when planning because of shorter delivery times.
The indexable inserts available via Walter Xpress include the high-performance P600x replaceable-tip drilling inserts and Walter Cut multiple-edge MX grooving inserts. The P600x drilling inserts are offered in quantities of 10 to 200 pieces with a diameter from 0.472 in (12 mm) to 1.496 in (37.99 mm). These are suitable for holes with a tolerance of IT8 or IT9 – either in intermediate steps between the nominal sizes or with a special feature such as a chamfer or a corner radius.
Also, the four-edged indexable inserts in the Walter Cut MX grooving system are offered in quantities of 10 to 50 pieces. These have a maximum cutting depth of 0.24 in (6 mm) and a cutting width of from 0.04 in (1mm) to 0.13 in (3.3 mm). The specials for MX inserts can include steps between nominal sizes or a feature such as a full radius, straight edge or a chamfer between 30 and 50°.
Machining grooves and shallow channels. Example: grooving ball-bearing raceways. Typically performed by tools that are capable of light cuts at high feed rates. Imparts high-quality finish.
Walter has broadened its line of boring tools with the introduction of the B3220 boring cartridge for axial-radial offset roughing (ARS), expanding on previous methods that were either symmetrical or asymmetrical. This versatile new tool, designed for use with the Walter B3220 but which can be used…
Walter has introduced new parting blade adapters for BMT/DO machines that ensure precision cooling of both the insert and the parting blade, thus improving chip control and tool life, and helping to increase productivity. With the Walter design, the coolant flows through the adapter directly into…
Walter USA LLC offers a solid-carbide, through-coolant drill for ISO-P and ISO-K materials. The design allows coolant flow to encompass the entire drill point, producing optimal cooling of both the drill and the tool/workpiece interface, according to the company. Controlling the coolant flow…
Designed to improve the manufacturing process, the new Walter Tool-ID system reportedly allows users to transfer tool data from the presetting device to the machine tool and evaluate the parameters that are run on the machine, according to a Feb. 2 news release from Walter USA LLC, Waukesha, Wis.…
Walter has introduced Walter Turn Precision Coolant, a powerful and targeted coolant delivery system that produces a direct coolant supply through the insert clamp and along the flank face of the insert. The result is said to be a 30- to 150-percent increase in tool life (depending on material and…
Walter has unveiled the Walter BLAXX M3024 heptagon milling cutter, the latest entry in its line of high-productivity milling tools. The M3024, in diameters from 1.5" to 6.0" (40mm to 160mm) boasts the line's trademark wear-protected black tool body, plus indexable inserts with 14…
In a news release issued Jan. 16, Walter USA LLC, Waukesha, Wis., unveiled its P6005-WKK45C point drill insert that reportedly brings new levels of performance and cost effectiveness to drilling cast materials (ISO K) as well as other materials. The P6005-WKK45C insert design features a new high-…
Walter Tools, Waukesha, Wis., recently introduced its new Advance product line, which the company claims increases tool life up to 50 percent. The MC251 Advance solid carbide milling cutters from Walter's Prototyp brand is said to be the ideal geometry for machining stainless materials from…
Walter says it has enhanced its M4000 milling cutter system with a new slot drill and a T-slot cutter, enabling users to tackle the vast majority of typical machining operations with a single high-performance yet cost-effective tooling system.
PRODUCTS
