Tungaloy is introducing the WavyJoint PCBN inserts, an innovative PCBN brazing technology for higher productivity in hard turning operations.
Hardened steel parts are gaining broader acceptance in today’s automotive industry to meet the requirements of downsizing for less emission and energy. Manufacturers are seeking cost-effective solutions to improve productivity and machining efficiency. PCBN inserts are an effective solution to turn hardened steel parts.
However, a PCBN tip brazed with a conventional brazing technology is prone to detach, or debraze, from its carbide base insert when turned dry at a large DOC. Therefore, the operator has to use multiple, small cutting depth passes. The WavyJoint PCBN insert can significantly improve machining efficiency, enabling hard turning in a single pass at a large DOC and at a high feed rate.
At a glance:
Innovative brazing method allows for a large DOC, up to 1.6 times that of conventional PCBN inserts.
Larger PCBN mass of the cutting tip enhances thermal stability during deep and dry cutting.
Capable of a DOC up to 0.8 mm. Fewer turning passes for higher efficiency.
Reduced risk of debrazing allows for dry and interrupted cutting at a large DOC.
Reduces premature insert failures caused by thermal fatigue often seen in wet cutting.
Phenomenon leading to fracture under repeated or fluctuating stresses having a maximum value less than the tensile strength of the material. Fatigue fractures are progressive, beginning as minute cracks that grow under the action of the fluctuating stress.
Cutting tool material consisting of polycrystalline cubic boron nitride with a metallic or ceramic binder. PCBN is available either as a tip brazed to a carbide insert carrier or as a solid insert. Primarily used for cutting hardened ferrous alloys.
Workpiece is held in a chuck, mounted on a face plate or secured between centers and rotated while a cutting tool, normally a single-point tool, is fed into it along its periphery or across its end or face. Takes the form of straight turning (cutting along the periphery of the workpiece); taper turning (creating a taper); step turning (turning different-size diameters on the same work); chamfering (beveling an edge or shoulder); facing (cutting on an end); turning threads (usually external but can be internal); roughing (high-volume metal removal); and finishing (final light cuts). Performed on lathes, turning centers, chucking machines, automatic screw machines and similar machines.
Additional Products from Tungaloy-NTK America, Inc.
The development of a cutting tool that optimizes performance during vibration cutting is a game-changer. NTK offers the ultimate solution, eliminating the uncertainty in tool selection.
The QC10 series offers an extensive selection of modular heads for applications including forward turning, back turning, grooving, parting, and thread turning. All modular heads have an internal coolant channel designed to deliver high pressure coolant precisely where it is needed, close to the…
DX200 directly binds the diamond particles without using binder materials. This allows the grade to have an extremely pure cutting edge, making it an extremely effective tool for machining application-specific components that demand high levels of material purity, such as metal medical implants and…
TCB now offers AH6225 grade inserts. This latest physical vapor deposition (PVD) coated grade features a high-hardness titanium-rich PVD coating, combined with a tough dedicated carbide substrate. Extremely reliable and versatile insert grade, AH6225 allows TCB to efficiently cut bores in all…
DrillForceMeister incorporates a unique head-shank coupling interface that provides exceptional reliability when drilling relatively large diameter holes from 20 millimeters to 41 millimeters. When clamped, the drill head interlocks with the shank at larger contact areas, promoting high hole…
Providing exceptional reliability and increased tool life in steel, the new AH3225 insert grade consists of a unique nano-multilayer coating featuring three distinctive characteristics for improved resistance to built-up edge, wear, and delamination, combined with a dedicated tough carbide…
The CBN-tipped mini boring bars feature BX310 uncoated CBN grade that increases the grade’s wear resistance when used at low to medium cutting speeds, making it perfect for machining small bores from as small as 2.8 millimeter (.110 inch) diameter of hardened steel parts.
The QC16 line offers toolholders with 16x16 mm square shanks and the matching modular cutting heads. The new line features an enhanced coupling that is capable of sustaining high cutting edge repeatability and tool rigidity when used for applications generating greater cutting loads that…
DoMultiRec multifunctional milling cutter with center cutting capability enables a single tool to perform multiple milling operations, including shouldering, pocketing, and drilling. The DoMultiRec inserts to ensure strong and sharp cutting edges during various milling and drilling operations.
A PVD-coated cemented carbide grade, AH8015 features an extremely hard high-aluminum content multilayer coating that is combined with a tough dedicated carbide substrate. The grade provides the insert with a well-balanced wear and chipping resistance.
PRODUCTS
