Tungaloy is introducing the WavyJoint PCBN inserts, an innovative PCBN brazing technology for higher productivity in hard turning operations.
Hardened steel parts are gaining broader acceptance in today’s automotive industry to meet the requirements of downsizing for less emission and energy. Manufacturers are seeking cost-effective solutions to improve productivity and machining efficiency. PCBN inserts are an effective solution to turn hardened steel parts.
However, a PCBN tip brazed with a conventional brazing technology is prone to detach, or debraze, from its carbide base insert when turned dry at a large DOC. Therefore, the operator has to use multiple, small cutting depth passes. The WavyJoint PCBN insert can significantly improve machining efficiency, enabling hard turning in a single pass at a large DOC and at a high feed rate.
At a glance:
Innovative brazing method allows for a large DOC, up to 1.6 times that of conventional PCBN inserts.
Larger PCBN mass of the cutting tip enhances thermal stability during deep and dry cutting.
Capable of a DOC up to 0.8 mm. Fewer turning passes for higher efficiency.
Reduced risk of debrazing allows for dry and interrupted cutting at a large DOC.
Reduces premature insert failures caused by thermal fatigue often seen in wet cutting.
Phenomenon leading to fracture under repeated or fluctuating stresses having a maximum value less than the tensile strength of the material. Fatigue fractures are progressive, beginning as minute cracks that grow under the action of the fluctuating stress.
Cutting tool material consisting of polycrystalline cubic boron nitride with a metallic or ceramic binder. PCBN is available either as a tip brazed to a carbide insert carrier or as a solid insert. Primarily used for cutting hardened ferrous alloys.
Workpiece is held in a chuck, mounted on a face plate or secured between centers and rotated while a cutting tool, normally a single-point tool, is fed into it along its periphery or across its end or face. Takes the form of straight turning (cutting along the periphery of the workpiece); taper turning (creating a taper); step turning (turning different-size diameters on the same work); chamfering (beveling an edge or shoulder); facing (cutting on an end); turning threads (usually external but can be internal); roughing (high-volume metal removal); and finishing (final light cuts). Performed on lathes, turning centers, chucking machines, automatic screw machines and similar machines.
Additional Products from Tungaloy-NTK America, Inc.
DrillMeister features simple and swift drill head indexing due to its self-clamping system. Tool replacement is easy: just replace the drill head. There is no need to remove the entire drill body from the toolholder and re-adjust the tool overhang, thus reducing a large amount of tool change time.
Tungaloy Corp. added threading inserts with sharp cutting edges to its TetraMini-Cut insert series, which allows undercutting and finishing of a flange wall. Complemented by the new PVD grade, SH725, TetraMini-Cut’s new threading insert features sharp cutting edges, making it suitable for cutting…
Tungaloy Corp. further expands its indexable-insert gundrill line, DeepTriDrill, with options down to a diameter range of 14-15.9 mm. Deep-hole drilling is a challenging operation and often creates a bottleneck in holemaking shops around the globe.
Tungaloy Corp. has expanded the TungTurn-Jet line, the turning tool system with high-pressure coolant capability. Until now, coolant was simply applied by flooding the cutting area, which can cause chips generated during machining to interfere with the coolant flow, preventing it from reaching the…
Tungaloy America Inc. offers the DuoJustCut parting tool for Swiss-style lathes. The clamping system rigidly clamps inserts, and the optimized overhang length delivers stable and productive machining, according to the company.
DoTriple-Mill is Tungaloy’s latest facemilling cutter, featuring an innovative dovetail clamping system that will reportedly dramatically reduce insert lift up and excessive shear force imposed on the screws during heavy-duty milling. Compared with the last generation of facemilling platforms,…
Tungaloy Corp. offers TungForce-Rec, the indexable miniature shoulder milling cutter. The TungForce-Rec insert has a unique V-shaped bottom to enhance the insert’s resistance to centrifugal force, assuring reliability and high productivity during high-speed machining, according to the company.
DoTwistBall from Tungaloy America is an ideal tool for die and mold, as well as general engineering. Combined with a rigid clamping mechanism, the insert’s unique twisted shape improves chip evacuation for stable machining and long tool life in roughing operations.
Tungaloy Corp. introduces TungTri-Shred, a new shoulder milling cutter for highly productive machining. With today’s dramatic growth in the performance of machine tools, high-speed machining is often the first choice for manufacturers.
DoMini-Mill is a copy mill developed for semifinishing operations, featuring Tungaloy’s latest H-class insert. The economical six-cornered insert with dovetail clamp technology has a double-sided geometry, yet positive flanks, providing sharpness and high cutting edge strength simultaneously.
PRODUCTS
