Product News

The xsTECH is small but features big capabilities for cutting plastics, wood, and aluminum. An ideal starter CNC system for students learning CNC fundamentals, the xsTECH comes ready to run and requires no assembly.  It plugs into a standard 120V wall outlet and for those outside of the US, a 230V version is available.

The core of the cleaning system is a wear-free, two-component ring nozzle through which the non-flammable and non-toxic carbon dioxide is fed. On exiting the nozzle, the carbon dioxide expands to form fine CO2 snow, which is then bundled by a separate jacketed jet of compressed air and accelerated to supersonic speed.

This compact model, measuring a mere 49mm/54mm in length and the central bore hole with a diameter of 37.5mm/ 46.5mm, provides technicians with the flexibility and user-friendliness necessary for carrying out application tests on automotive parts, such as coaxial transmissions or gearboxes.

The new ASTM E2737 Detector Evaluation Package is available to suit the entire range of Nikon Metrology’s X-ray CT inspection, metrology and large envelope CT systems. All of the manufacturer's X-ray sources are supported including rotating target technology and the world's only 450kV microfocus source, in addition to the full range of industry-leading detectors. 

WBH20 is a grade well suited for ISO-H Group of material such as for hard turning applications. WBS10 is well suited for ISO-S materials, specifically nickel-based (such as Inconel), iron-based (such as Udimet) or cobalt-based (such as Hayens). 

These tools, from clearance calculation to wall thickness analysis, form a comprehensive combination of complementary functions for digital product development - something otherwise reserved for expensive CAD systems. Together, with an intuitive interface, these features support users from different fields of expertise in making quick and reliable decisions.

As part of the well-known MCS10 series, this latest version features capacities double the size of the previous version, making it suitable for nominal loads of 40 kN for Fx/Fy, 200 kN for Fz, 3.5 kNm for Mx/My and 3.0 kNm for Mz. The sensor also offers high accuracy, IP67 protection, low crosstalk, compensation matrixes, TEDS and a wide temperature range.

The launch of the new DX4 servo drive and MX servo motor series expands Trio’s machine solution and now makes it faster and easier for OEMs to utilize the high performance motion control available from Trio’s range of Motion Coordinators. The DX4 servo drive has plug-and-play compatibility with Trio’s controllers and slice I/O systems, all programmed within a single software, Motion Perfect 5. This increases the speed of application development and commissioning for OEMs in industries including packaging, medical, metal, CNC, robotics and 3C. The DX4 servo drive operates at 200V AC and power extends from 50W to 3kW.

With the new S-250(u) and C-350 cards, Swissbit has extended the long-term availability of its robust and durable storage media to a total of almost 20 years. While NAND flash products usually have a short availability due to relatively rapid innovation cycles, Swissbit meets the critical requirements of industrial embedded systems with long life cycles through these special products. The S-250-SD and S-250u-microSD memory cards are SLC-based memory products that comply with the SD standard and support the SPI mode.

The TiM240 is the first variant in the TiM2xx series and has an enclosure rating of IP65 for indoor use. The TiM240 scans a 240° area up to 10m away at speeds up to 15 times per second. This allows the user to cover a relatively large space (200m2) with one scanner and to quickly transmit any measurement changes to the controller via Ethernet. The tried-and-proven HDDM+ technology guarantees the stable and reliable output of measurement data. The low power consumption of 2.9 watts becomes a particular advantage when used in battery-operated vehicles.

The GEMVM system measures acceleration in up to three axes (depending upon sensor type) with a measuring frequency of up to 5.6kHz and a sampling rate of 25kHz. It has eight definable and selectable operating modes with five freely activatable static alarms. Any events that violate the predefined hard stop limits are logged in the event memory with relevant information for later analysis.

GC4415 and GC4425 are ideal for manufacturers operating in mass and batch production setups machining low-alloyed (P 2.1 to 2.6) and unalloyed (P 1.1 to 1.5) steels, respectively. Grade GC4425 has been shown to outperform competing inserts in a majority of steel turning applications. It features improved wear, heat resistance and toughness, which significantly expands the application range. Both it and GC4415 can be used from finishing to roughing in applications with continuous cuts and light interruptions.

PI’s closed-loop piezo system handles the motion part in the TERA-print TERA-Fab™ E series platform. The piezo XYZ stage precisely moves the substrate under the beam pen array between light exposures and enables rapid reconstruction of an arbitrary, high-resolution pattern - up to 100,000s of sub-250nm pixels at a time. The nanopositioning mechanism is actuated by special multilayer piezo stacks whose ceramic encapsulation provides protection against humidity and moisture, important in bio-chemical applications.

XM-60 has become the market leading solution for direct measurement of all six degrees of freedom (linear, vertical and horizontal straightness, pitch, yaw and roll) on any form of linear axis. With the addition of the new XM-60 long range measurement functionality in CARTO 4.2, unlimited measurement range is now possible for the first time. 

The Mate 52/96 workholding system includes QuickSpecs™, Mate’s unique product identification system. QuickSpecs allows real-time access to critical user data, CAD models and potential integration into business systems. Additionally, the product supports common robotic interfaces and palletizing systems to support factory automation.

The clever design features 5 rows of clamping with 12 “fingers” on each row that flex and conform to part dimensional variations as well. One toggle lever clamps all five bands and draws them down securely for the dot peen marking operation. Custom configurations and pneumatic powered designs are also available. 

The Turret Milling Machine guarantees rigidity for a lifetime of vibration free accuracy due to the extra fine Meehanite castings. The machine’s long term reliability and precision are the result of high quality components and expertly crafted construction.

The 5074B also comes with two features that deliver major operational improvements. The new amplifier is ready to operate within around six seconds, as compared to the previous time of 30 seconds for each startup procedure – so users save valuable time. This improvement has a direct impact on plant availability, especially for modular plants with swappable hot-plug modules. Another innovation: the two energy paths in the M8 connectors are now separated so that additional standard devices can be connected as per the industry standard without extra considerations. 

The encoders are offset and coupled directly to the drive, as the motors are very small. A motor has a rotor and a stator component, so what we do is couple the ring to the rotor component. As the motor starts to spin, it accurately rotates the ring with respect to the encoder readhead, which is placed outside the entire mechanism. The beauty of the radar application is that the RF energy propagates in free space through the bore of each motor.

The Grieve top-loading oven features 6” insulated walls, 16-gauge aluminized steel interior and a bottom reinforced for 800 lb. capacity. Additional features include a heat chamber mounted below the workspace and a pneumatic “L” shaped door.