Why Resources
Resources
Why Resources
Explore 121 published CTE resources related to Why across 47 articles, 19 products, 20 videos, and 35 news items.
47
Articles
19
Products
20
Videos
35
News
Articles
47 articles
Products
19 products
Videos
20 videos
News
35 news items
Tungaloy responds to rising carbide costs
BIG Daishowa Hosts Breakfast & Learn Event
ZOLLER Open House Focuses on Integrating Success
The power of density determination in additive manufacturing
5 reasons why CFexpress is the future of industrial memory cards
Tricks and techniques for specifying surface texture parameters
Browse
Browse all Why resources
Browse results
WBH10C, WBH10 and WBH20 PCBN Inserts
Walter has introduced new PCBN grades for improved turning of hardened steel up to 65 HRC. These grades (WBH10C, WBH10 and WBH20) provide users with an array of benefits. High-quality surface finish due to unique new wiper geometry (MW2) and long tool life with the new TiAlSiN-coated grade (WBH10C) are just some of these benefits.
Manufacturing can’t afford to be a man’s world
Women make up around 47% of the U.S. labor force, nearly 74 million people and counting. But the percentage of manufacturing roles filled by female workers is only 29%. In a sector not only flourishing but facing a potential shortfall of workers, why do women remain so vastly underrepresented?
Advanced manufacturing is a key economic driver for northeast Ohio
Advanced manufacturing is a significant driver of the northeast Ohio economy and has been a key factor in the region's recovery from the recessions of the early 2000s and 2008. However, growth in employment in the sector has fallen behind increases in gross regional product, and efforts to address this challenge will require an increase in the area's skilled workforce.
NIMS and Festo Didactic to develop Industry 4.0 skills standards
The National Institute for Metalworking Skills (NIMS), in partnership with Festo Didactic, will establish industry-recognized skills standards and ultimately credentials for jobs related to Industry 4.0. In light of the significant trend in digitalization of manufacturing through technology advancements such as Industrial Internet of Things (IoT), training in these skills is vitally needed now.
Linking two roll lathes doubles capacity without increasing personnel costs
Heinrich Georg Maschinenfabrik has received an order from Vítkovické Slévárny spol. s r.o. for the supply of a roll lathe, the third lathe so far supplied by GEORG to the Czech roll manufacturer. The new machine will be linked with one of the existing lathes.
Vigilant and SafeSite Low Profile/Top Conduit LED Linear Fixtures
Dialight launched its new line of Vigilant and SafeSite Low Profile/Top Conduit LED Linear fixtures, now offering an industry-leading 10-year warranty for reliable, long-life performance with triple the lifespan of conventional T-5 fluorescents even in the harshest conditions, including upstream and downstream oil and gas, petrochemical and heavy manufacturing applications.
1/8 NPT Small Internal Mix Spray Nozzles
EXAIR's new 1/8 NPT small internal mix spray nozzles atomize fluids up to 42 gallons per hour. Internal mix atomizing nozzles mix the liquid and air inside the cap and produce the finest atomization. Internal mix nozzles can be used on liquids with a viscosity up to 300 centipoise.
Multi Mini Rhinobar Hydrodynamic Bar Feeder
Lexair Inc. is offering the Multi Mini Rhinobar, a hydrodynamic bar feeder for use with Swiss-style CNC screw machines that features a three feed tube cartridge instead of the traditional single feed tube. The Multi Mini makes multiple stock diameter indexing simple and fast by combining three feed tubes inside a single aluminum barrel.
Automated Part Clamping
When an equipment manufacturer wanted to automate part clamping for a high-volume casting to be machined in a robot attended machining cell they turned to Kurt Workholding custom engineers for support. After reviewing the initial machining cell and part requirements, Kurt engineers drew upon past workholding experience and designs along with some new developing ideas in air powering workholding systems.
Manufacturing is finally entering a new era
Manufacturing is in the midst of a period of unprecedented change as we transition from the industrial age to the information age. The manufacturers that will prove best able to capture value amid this transition will be those that can best manage complexity and embrace flexibility. A new layer of manufacturing software has emerged to answer this call.
Casting a wide net to attract manufacturing talent
The light is a little too dim for Carolyn Lee, executive director of the Manufacturing Institute at the National Association of Manufacturers. She wants the industry to shine a brighter light on itself and attract the recognition it deserves.
Grinding Machines Integrate Eroding and/or Grinding Capabilities
Based on a highly efficient and productive two-in-one concept, Walter Helitronic Vision Diamond 400 L, Helitronic Power Diamond 400 and Helitronic Diamond Evolution tool grinding machines, from United Grinding North America Inc., integrate both eroding and/or grinding capabilities into single grinding machine platforms.
