Resources
Why Resources
Explore 121 published CTE resources related to Why across 47 articles, 19 products, 20 videos, and 35 news items.
47
Articles
19
Products
20
Videos
35
News
Articles
47 articles
Products
19 products
Videos
20 videos
News
35 news items
Tungaloy responds to rising carbide costs
BIG Daishowa Hosts Breakfast & Learn Event
ZOLLER Open House Focuses on Integrating Success
The power of density determination in additive manufacturing
5 reasons why CFexpress is the future of industrial memory cards
Tricks and techniques for specifying surface texture parameters
Browse
Browse all Why resources
Browse results
Multiple-Axis CNC Grit Blaster
Guyson's new multiple-axis CNC grit blaster was designed for a prep prior to coat application in the aerospace industry. The heart of this system is based around the blast manipulation with 4-axis controls directed by a Siemens CNC system and roof-mounted 2-axis cartesian gantry with table positional capability of 0° to 360°.
Energy Series Large-Bore Air Chucks
LMC Workholding offers the Energy series large-bore air chucks, featuring a built-in air cylinder and extra-large through-hole. The full spindle bore of the lathe can be utilized for through-hole work and long jaw travels provides more clearance for through feeding pipe.
Compound RP-99S Rust Preventive
Madison Chemical introduces Compound RP-99S, a versatile water-based rust preventive for use on ferrous and copper metals. Applied to previously cleaned parts by immersion, manual spray or recirculated spray methods, Compound RP-99S leaves a nearly invisible, dry-to-the touch film that provides short-term indoor storage protection for treated parts lasting up to four weeks, or longer depending on concentration.
![[8] The CNC Chef: What is high-speed machining?](https://ctemag.com/wp-content/uploads/2017/09/poster-300x169.jpg)
[8] The CNC Chef: What is high-speed machining?
Understanding high-speed machining, or HSM as it's abbreviated, can be difficult for the simple reason it's defined in so many different ways, according to Bob Warfield of the CNCCookbook. As he explains in the eighth episode of The CNC Chef video series, some people define HSM as being all about high spindle speeds and the feedrates that go with them.
Komet Group GmbH partners with MachiningCloud Inc.
Almost 30,000 metric tools from Komet Group GmbH, Besigheim, Germany, are now available through MachiningCloud Inc., Camarillo, Calif.
‘New-collar’ jobs, millennial workers and Manufacturing Day
In manufacturing, the nature of the work as well as the nature of the workers are changing: What's a prospective employer to do? Some pre-Manufacturing Day discussion.
Fact vs. fiction: the truth about balancing toolholder assemblies
If you're lucky, the veterans in your shop will take a rookie aside and pass on their hard-won knowledge of good machining practices. Most of this information is priceless. But some of it … not so much. For example, there are a lot of myths about balancing out there that, if not refuted, can cost your operation a lot of lost time and money.
World Bank: Tech, trade changes disrupting manufacturing-led development
Advances in technology and changing trade patterns are affecting opportunities for export-led manufacturing. Smart automation, advanced robotics and 3-D printing are new factors influencing which locations are attractive for production. While these shifts threaten significant disruptions in future employment, particularly for low-skilled workers, they also offer opportunities, according to a new report released today by the World Bank Group.
An overview of milling applications
Entering the workpiece is an essential part of optimizing tool life and reducing vibrations. The roll-in method allows you to softly and smoothly enter the workpiece. Inserts are eased into the cut following the golden rule of milling: a thick chip on entry and a thin chip on exit.
IFR forecast: 1.7 million new robots by 2020
In 2017 robot supplies in the Americas will surge by 16 percent from 2016, according to the International Federation of Robotics. IFR estimates that by 2020 the worldwide stock of operational industrial robots will increase from about 1,828,000 units at the end of 2016 to 3,053,000 units—an average annual growth rate of 14 percent between 2018 and 2020.
Report: Every third cyber-attacked computer is from the manufacturing sector
A new report from Kaspersky Lab found that in the first half of the year, the manufacturing industry was the most susceptible to cyberthreats – with the industrial control systems (ICS) computers of manufacturing companies accounting for almost one third of all attacks.
LC 280 α Gear Hobbing Machine
In recent years the gear market has been experiencing a trend towards outsourcing. As a result of this shift, many suppliers are receiving orders for the soft machining—wet or dry hobbing--of gears. "With the LC 280 α, Liebherr has developed a new generation of gear hobbing machines for such short-term requests", said Dr.-Ing.
