Why Resources
Resources
Why Resources
Explore 121 published CTE resources related to Why across 47 articles, 19 products, 20 videos, and 35 news items.
47
Articles
19
Products
20
Videos
35
News
Articles
47 articles
Products
19 products
Videos
20 videos
News
35 news items
Tungaloy responds to rising carbide costs
BIG Daishowa Hosts Breakfast & Learn Event
ZOLLER Open House Focuses on Integrating Success
The power of density determination in additive manufacturing
5 reasons why CFexpress is the future of industrial memory cards
Tricks and techniques for specifying surface texture parameters
Browse
Browse all Why resources
Browse results
High-Pressure Work: General Industry Coverage
Components used in the manufacture of combustion hardware for a Mitsubishi gas turbine begin life as sheet or plate stock. Because our components come from large sheets, we start every manufacturing process by cutting the desired shape or profile.
Multibenefit Machines
CNC lathes have evolved greatly over the past few decades. What were once simple 2-axis turning machines have become a bewildering array of extremely capable metalcutting equipment, most of which offer two spindles, multiple turrets, robust milling capabilities and can complete many parts in a single setup. In other words, they have become multitask machines.
Clamp Down: General Industry Coverage
The technology to form, press and grind indexable carbide inserts has evolved to such a high degree that the methods to effectively clamp inserts in a cutter body have struggled to keep up, but strides are being made. Some insert shapes have advanced to the point where they have a true, 100-percent, 3D geometry with almost no flat surfaces.
Cutting remarks: General Industry Coverage
Michael Finklea believes that there isn't much reported on sawing in the manufacturing trade press because "it's kind of the redheaded stepchild in the industry—an unappreciated part of the manufacturing process. In most shops, the least-skilled person is running the saw."
Dormer Pramet impacts the railway industry
It is a matter of course for manufacturers of rail and train components to ensure that quality products and services continue to be delivered to the industry every day. Increasing reliability through new tools, materials and machining techniques, as well as supporting productive and cost effective maintenance of existing infrastructure, is crucial.
CHD270
Vollmer of America's CHD270 is a sharpening machine with 8 CNC-controlled axes and a measurement device, and it's intended for the automatic machining of carbide-tipped circular saw blades with various diameters and tooth geometries on face and top.
CM 200 and 300
The use of carbide- or cermet-tipped thin-kerf metal circular saws allows for high feed rates, low machining forces and thin saw kerfs—all of which reduces energy consumption and saves resources, according to Vollmer of America, which specializes in grinding and erosion machines, and develops sharpening machines such as the CM 200/300 and the CMF 200/300.
CHC & CHP Sharpening machine series
Intended for hook and clearance surfaces of carbide-tipped saw blades, the CHP 840 and 1300 universal sharpening machines with four CNC-controlled axes are suitable for the complete machining of all commonly found tooth geometries, according to Vollmer of America.
Vgrind 360 Tool-Cutter
With greater scope in terms of its travel capabilities, the new Vgrind 360 is able to machine tools up to a diameter of 200mm, depending on the geometry. Just like its predecessor, the Vgrind 160, the same effective kinematics with two vertical spindles allow for multi-level machining.
Full-Flow Filtration Technology
VOMAT says its full-flow filtration technology completely separates dirty oil from clean oil and allows for grinding with optimally cleaned cooling lubricants. VOMAT's filtration systems clean the oil so efficiently that it's useful life is much longer than if it were filtered with conventional filter systems still using paper filters or other expensive disposable filter media.
QXD 250
The Vollmer eroding machine QXD 250 makes it possible for tool manufacturers to process more than 30 percent more PCD cutters in the same amount of time as has been the case up to now. This milestone in production is made possible by the generator technology Vpulse EDM, which sets the eroding beat at the heart of the QXD 250.
Front Locking Nut Technology for M12 Connectors
Mencom announces new front locking nut technology for its M12 connectors. These front mount receptacles with front lock nut are for thread mount applications that need specific keyway orientations due to the space constraint or any other unexpected engineering situations.
