Why Resources
Resources
Why Resources
Explore 121 published CTE resources related to Why across 47 articles, 19 products, 20 videos, and 35 news items.
47
Articles
19
Products
20
Videos
35
News
Articles
47 articles
Products
19 products
Videos
20 videos
News
35 news items
Tungaloy responds to rising carbide costs
BIG Daishowa Hosts Breakfast & Learn Event
ZOLLER Open House Focuses on Integrating Success
The power of density determination in additive manufacturing
5 reasons why CFexpress is the future of industrial memory cards
Tricks and techniques for specifying surface texture parameters
Browse
Browse all Why resources
Browse results
Swing Doors for Cabinets and Shelving
Rousseau Métal Inc. launched new swing doors for its "R" line of heavy-duty cabinets and shelving. Rousseau constantly seeks to improve its product offering and the innovative design of these new doors is the result of this ongoing effort.
Unclamp Delay Value
Hydraulic pressure on work supports diminishes faster than other clamps in the system. This can result is unplanned part movement or premature work support wear. Postponing the work support unclamp is the objective, and Vektek has developed an Unclamp Delay Valve to do just that.
“Materials Forming and Machining: Research and Development” Book
"Materials Forming and Machining: Research and Development" from Elsevier Inc.'s Woodhead Publishing imprint publishes refereed, high-quality articles with a special emphasis on R&D in forming materials, machining and its applications. A large family of manufacturing processes are now involved in material formation, with plastic deformation and other techniques commonly used to change the shape of a workpiece.
B3220 Boring Cartridge
Walter has broadened its line of boring tools with the introduction of the B3220 boring cartridge for axial-radial offset roughing (ARS), expanding on previous methods that were either symmetrical or asymmetrical.
Polistar-Tube Tubing Systems
POLISTAR, the line of flexible abrasive stars from PFERD INC. that has been developed for work on the hard-to-reach inner surfaces of bores and pipes, has just gotten even more effective with the introduction of POLISTAR-TUBE. POLISTAR-TUBE is a multi-stage tubing system that highlights the effectiveness of POLISTAR on even more hard to reach bore and pipe interiors.
QP5X-400 Vertical Machining Center
Chevalier's QP5X-400, a 40-taper, high-speed VMC that features 5-axis simultaneous or 4+1 axis applications. The standard machine is integrated with 2-axis, 12.6" trunnion table. The new QP5X-400 has better accuracy, more productivity, less manpower, less cycle time and higher profitability, according to the company.
GP Endmills
YG-1 Tool Co. says it has changed the way you will look at general-purpose endmills. With YG-1's superior substrate and YG-1's proprietary coating on its GP endmills, the tools impart a fine surface finish on workpieces and extend tool life at a competitive price.
Top Loader Loading System
WALTER says it offers a completely new type of loading system for new machines of the types HELITRONIC MINI POWER, HELITRONIC DIAMOND EVOLUTION and HELITRONIC ESSENTIAL. The new space-saving and cost-effective automation solution "Top loader" is integrated directly into the machine, therefore requiring no additional floor space and no restriction of the working envelope of the machine.
XYZ Xpansion Pins
Mitee-Bite Products releases the patent pending Modular XYZ Xpansion Pins for tombstone, grid plate and fixture plate applications. They provide accurate location, repeatability and high holding forces for securing parts and components on the ID.
ActiveEdge Boring Tool
Rigibore's ActiveEdge is an automatically adjustable boring tool, allowing a close tolerance bore diameter to be maintained without the need for an operator's intervention. This innovative system allows micron-accurate adjustments to be made on up to five individually adjustable cutting edges on the boring tool.
Mycenter-HX250G Horizontal Machining Center
Kitamura's Mycenter-HX250G HMC offers up a small footprint with ultrahigh level accuracies. This unique powerhouse has a standard two-station APC with full 4-axis capabilities for drilling, milling, boring, tapping, threading and much more. A standard high-speed 15,000-rpm, dual-contact spindle is ideal for tougher cuts with a 30,000-rpm option for more highly intricate part processing.
Forte Broaches
Somma Tool Co. announces a new line of broaches called Forte. Forte broaches are made of tough broaching material. It is the company's new standard stock material, replacing M2.
