Machine Tool Accessories

TungForce-Feed features a large rake angle and positive inclination angle on the cutting edge that provide excellent chip control while reducing spindle loads and energy consumption. This allows a higher feed rate or greater depth of cut to be applied for improved efficiency and, by working in synergy with the cutter’s high insert density design, produces 130%-150% gain in metal removal rates. 

The conveyor’s open design eliminates concerns of small parts or screws dropping into rollers and causing conveyor damage or jamming. The ERT 250 is ideal for applications calling for pallet or tray handling; no- and low-back pressure accumulation; medium to heavy load assembly automation; and Cleanroom applications such as medical product or device manufacturing, assembly, packaging and others. 

In addition to the restoring torque, the functional hinge can also withstand great mechanical stress since it is made of a particularly durable high-performance polyamide plastic, and therefore boasts of particularly high mechanical strength. The aluminum rotating sleeve and stainless steel torsion spring offer maximum wear and corrosion resistance. In tests, the ingenious design leaves the restoring torque unchanged over 100,000 actuation cycles.

Featuring a totally enclosed fan-cooled design in a cast iron frame, this proven design is suitable for indoor or outdoor installation in some of the most demanding environments and applications.  Rated as a 75 hp, 460 v, 1800 rpm electric motor, this innovative design delivers 95.0% efficiency at rated load with a near-unity power factor.  The NEMA 445T frame motor weighs about 1,920 pounds and draws just 170 amps at full load.

The e-spool flex increases safety at manual workstations and operating panels. For quick installation of the cable reel, the developers opted for a worm guide. The cable is inserted in a few simple steps, and the e-spool is ready for use.

Industrial Ethernet is the future step for the digitized factory of tomorrow. Many studies show that the world of fieldbus is stagnating, and the number of Ethernet nodes is increasing, with high double-digit growth rates. This is true in Asia but increasingly in Europe as well, and users are choosing CC-Link IE (Industrial Ethernet) technologies. These systems offer seamless data exchange on all levels of a production facility, from the highest control level to the manufacturing levels.

AH8015 consists of a nano-multilayered PVD coating with high aluminum content. This coating characteristic provides increased resistance against wear and built-up edge over existing grades, enabling long and predictable tool life during the machining of heat resistant superalloys and stainless steel.

The HH-30D Hybrid Hexapod was developed by ALIO Industries to address the inherent performance limitations of conventional hexapods. ALIO’s patented 6-degree-of-freedom (6-DOF) design seamlessly blends and takes advantage of the strengths of serial and parallel kinematic structures while avoiding their weaknesses.

PI adds to its compact A-311 line of low-profile planar XY air bearing stages. PI’s U.S.-based air bearing R&D and manufacturing teams have created two new versions with travel ranges of 200mm x 200mm and 300mm x 300mm. Planar scanning stages are suitable for semiconductor inspection, laser marking, optical metrology and other precision motion applications.

Indexing plungers very often fulfill safety functions, but this isn’t the only time when it is important to obtain feedback about their position. With the new series GN 817.6, JW Winco also allows automated status checks.