Industry News for all/

February U.S. cutting tool consumption totaled $190.12 million, according to the U.S. Cutting Tool Institute and the Association for Manufacturing Technology. This total, as reported by companies participating in the Cutting Tool Market Report collaboration, was up 3.5 percent from January’s $183.61 million and 8.7 percent when compared with the $174.98 million reported for February 2017. With a year-to-date total of $373.73 million, 2018 is up 7.4 percent when compared with 2017.

Diacid 1550 is a bio-based emulsifier with a growing reputation among metal working fluid formulators worldwide. Because of its ability to create a more stable metalworking fluid and provide corrosion inhibition, Diacid is a trusted addition to formulations used to machine super alloy metals. This means that customers can expect precision even in the high-heat and high-pressure environments of jet and rocket engine manufacturing. That’s The Ingevity Effect.

The most fundamental elements of any metalcutting process, cutting tools are by their nature consumable. They wear until they are no longer effective. A traditional approach to metalcutting tool management employs wear analysis alone, focused on manipulating tool materials, geometries and application parameters to improve part output and tool life in a selected operation. To maximize the efficiency of your facility’s entire manufacturing process – boosting part-processing productivity and impacting the bottom line – you must go further in the pursuit of optimization.

CNC machines rely on certain fundamentals to achieve peak performance for maximum productivity. This not only includes the machine but importantly the infrastructure of the facility, specifically ancillary services such as power, air and coolant.

There are many advantages to financing your equipment purchases instead of paying cash. Stearns Bank vice president of business development, Michelle Fuchs, has helped many businesses reap the benefits of commercial equipment financing. They’ve learned that financing, rather than cash, is the best approach for the long-term health of their business.

United Grinding Group AG held an event in its Kuřim, Czech Republic-based Walter Maschinenbau GmbH production facility to announce its new flow assembly line. Speakers included Walter CEO Jürgen Schock and flow assembly line project manager Markus Schulze, both of whom welcomed guests and introduced the new innovation prior to pressing a symbolic start button with the entire project team to launch the new line.

The Bureau of Labor Statistics reported that manufacturers added 22,000 workers in March, extending the 32,000 gain in employment in February. It was the sixth consecutive month with robust hiring growth in the sector, averaging 27,167 per month over that time frame.

John and Miles O’Brien are two of a few South Bend, Ind., business founders whose product is still being manufactured in the United States. John and Miles, born in Ireland in 1868, were identical twins whose family immigrated to the U.S., settling in Connecticut in the 1870s. At the age of 35, they went into business for themselves in a one-room building at the corner of West Washington and Johnson streets in South Bend. They began manufacturing lathes, at the time the most vital machine for any industry using metal or steel parts.

Fredon Corp. of Mentor, Ohio, received the 2018 Technology Best Practices Award from the National Tooling and Machining Association. Fredon’s use of a machine utilization tracker is an example of how manufacturers are using the internet of things and cloud technologies to improve performance on the factory floor, a company news release stated.

EMAG LLC announces its plans to hold its annual Technology Days at the North American headquarters in Farmington Hills, Mich., June 6-7. On June 6, the event will run from noon til 9 p.m. On June 7, from 8 a.m. til 2:30 p.m. The event will include a variety of machine tools under power for live demonstrations, plus a series of technical and market presentations by industry experts from the company.

There’s a very old parable, thought to have originated in the Indian subcontinent, of six blind (or blind-folded) men asked to describe an elephant. They reach different conclusions depending upon which part of the elephant they touch: side – it’s like a wall; leg – it’s like a tree; trunk – it’s like a snake; tusk – it’s like a spear; ear – it’s like a fan; and tail – it’s like a rope.

The accurate diagnosis of a bearing failure is imperative to prevent repeated failures and their additional expenses. While performing failure analysis is commonly left to outside vendors, the actual collecting of information can make a great difference in correctly diagnosing a bearing failure.

U.S. manufacturers face an aging workforce, concerns regarding safety best practices, ongoing movement toward lean manufacturing and the rapid emergence of new technologies. At the same time, people are struggling to pay bills, find work that provides a living wage, and support themselves and their families.

Learn how to achieve good chip control when drilling with indexable drills. Effective chip control is the most important factor in indexable insert drilling operations and is essential for quality hole making. Poor chip evacuation can result in poor surface finish and can lead to tool breakage and damaged components.

Wohlers Associates Inc. announced the release of Wohlers Report 2018, the industry-leading global report on the state of the additive manufacturing (AM) and 3D printing industry, terms used interchangeably. Wohlers Associates has published its series of annual reports on AM for 23 consecutive years.

The optimal machine tool plus the optimal tool equals the perfect combination. And that makes cost-effective processes and impressive machining results possible. One good example of this is the cooperation between the machine manufacturer, F. Zimmermann GmbH, and MAPAL. For demonstrations and machine acceptance tests, Zimmermann equips its new horizontal machining center with milling cutters from MAPAL.

By now, you've probably already heard of the Internet of Things and everything it provides for tech-savvy consumers. An extensive, worldwide network that bridges technological gaps and connects everything from modern cellphones and ATMs to smart microwave ovens, thermostats and more, the IoT will include approximately 200 billion devices by 2020.

If you work in the San Antonio-area manufacturing industry, you’re in the right place at the right time.

Can dressing superabrasive wheels, segments, saw blades and mandrels increase productivity?Yes, dressing done properly increases productivity.

Electric motors are used in a wide variety of applications and must meet a broad spectrum of requirements. When it comes to axis motors in machine tools, for example, torque ripple and the inertia ratio between the motor and the load are crucial factors, along with the maximum torque. These criteria have a direct effect on the quality of the workpiece to be manufactured.