Industry News

United Grinding Group AG held an event in its Kuřim, Czech Republic-based Walter Maschinenbau GmbH production facility to announce its new flow assembly line. Speakers included Walter CEO Jürgen Schock and flow assembly line project manager Markus Schulze, both of whom welcomed guests and introduced the new innovation prior to pressing a symbolic start button with the entire project team to launch the new line.

The Bureau of Labor Statistics reported that manufacturers added 22,000 workers in March, extending the 32,000 gain in employment in February. It was the sixth consecutive month with robust hiring growth in the sector, averaging 27,167 per month over that time frame.

John and Miles O’Brien are two of a few South Bend, Ind., business founders whose product is still being manufactured in the United States. John and Miles, born in Ireland in 1868, were identical twins whose family immigrated to the U.S., settling in Connecticut in the 1870s. At the age of 35, they went into business for themselves in a one-room building at the corner of West Washington and Johnson streets in South Bend. They began manufacturing lathes, at the time the most vital machine for any industry using metal or steel parts.

Fredon Corp. of Mentor, Ohio, received the 2018 Technology Best Practices Award from the National Tooling and Machining Association. Fredon’s use of a machine utilization tracker is an example of how manufacturers are using the internet of things and cloud technologies to improve performance on the factory floor, a company news release stated.

EMAG LLC announces its plans to hold its annual Technology Days at the North American headquarters in Farmington Hills, Mich., June 6-7. On June 6, the event will run from noon til 9 p.m. On June 7, from 8 a.m. til 2:30 p.m. The event will include a variety of machine tools under power for live demonstrations, plus a series of technical and market presentations by industry experts from the company.

There’s a very old parable, thought to have originated in the Indian subcontinent, of six blind (or blind-folded) men asked to describe an elephant. They reach different conclusions depending upon which part of the elephant they touch: side – it’s like a wall; leg – it’s like a tree; trunk – it’s like a snake; tusk – it’s like a spear; ear – it’s like a fan; and tail – it’s like a rope.

The accurate diagnosis of a bearing failure is imperative to prevent repeated failures and their additional expenses. While performing failure analysis is commonly left to outside vendors, the actual collecting of information can make a great difference in correctly diagnosing a bearing failure.

U.S. manufacturers face an aging workforce, concerns regarding safety best practices, ongoing movement toward lean manufacturing and the rapid emergence of new technologies. At the same time, people are struggling to pay bills, find work that provides a living wage, and support themselves and their families.

Learn how to achieve good chip control when drilling with indexable drills. Effective chip control is the most important factor in indexable insert drilling operations and is essential for quality hole making. Poor chip evacuation can result in poor surface finish and can lead to tool breakage and damaged components.

Wohlers Associates Inc. announced the release of Wohlers Report 2018, the industry-leading global report on the state of the additive manufacturing (AM) and 3D printing industry, terms used interchangeably. Wohlers Associates has published its series of annual reports on AM for 23 consecutive years.

The optimal machine tool plus the optimal tool equals the perfect combination. And that makes cost-effective processes and impressive machining results possible. One good example of this is the cooperation between the machine manufacturer, F. Zimmermann GmbH, and MAPAL. For demonstrations and machine acceptance tests, Zimmermann equips its new horizontal machining center with milling cutters from MAPAL.

By now, you've probably already heard of the Internet of Things and everything it provides for tech-savvy consumers. An extensive, worldwide network that bridges technological gaps and connects everything from modern cellphones and ATMs to smart microwave ovens, thermostats and more, the IoT will include approximately 200 billion devices by 2020.

If you work in the San Antonio-area manufacturing industry, you’re in the right place at the right time.

Can dressing superabrasive wheels, segments, saw blades and mandrels increase productivity?Yes, dressing done properly increases productivity.

Electric motors are used in a wide variety of applications and must meet a broad spectrum of requirements. When it comes to axis motors in machine tools, for example, torque ripple and the inertia ratio between the motor and the load are crucial factors, along with the maximum torque. These criteria have a direct effect on the quality of the workpiece to be manufactured.

Optimism among U.S. manufacturers is growing as the nation adopts policies that prioritize them, according to an industry advocacy group. The latest tax changes have "transformed the business climate," said Jay Timmons, CEO of the National Association of Manufacturers. "Manufacturing in America is a confident industry."

Vincennes University and the Porter County, Ind., career center are partnering for an early college program. Students seeking careers in precision machining will benefit from a completed addition to the career center and an equipment grant from Vincennes University that provided more than $300,000 in new CNC equipment, manual/conventional equipment, tooling, cabinets, benches and tables.

United Grinding North America Inc., Miamisburg, Ohio, will host "The Artistry of the Grinding Universe Event" April 18-19 at its new 110,000-sq.-ft. headquarters. The free 2-day educational event will give attendees an opportunity to explore the latest grinding technologies, automation and measurement systems that provide the turnkey solutions required to keep pace in today's evolving manufacturing landscape.

The HAIMER Safe-Lock pull-out protection system ensures safe cutting tool clamping. Special drive keys in the toolholder match the spiral-shaped grooves on the cutting tool shank, thus creating frictional clamping forces and a positive locking form-fit. This effectively prevents the cutting tool from pulling out of the toolholder. Furthermore, it increases the productivity through faster permissible speeds and increased tool life.

Today’s manufacturing and industrial processing facilities face intense competitive pressures, challenging economic conditions and stringent government regulations. To thrive, companies must engage in operational “best practices” designed to continuously improve process and product quality and reduce costs. An often overlooked method of process improvement is to remove oil from your facility’s wastewater or process stream as soon as possible, preferably using a highly cost effective “tube type” oil skimmer. Properly applying a tube type skimmer can pay for itself within a few months by improving operational efficiencies, promoting employee and environmental wellness and generating new revenue.