Contact Details
Leveling and precision alignment are vital processes in metalworking machines, inspection and testing equipment. Imprecise aligning a machine affects its dynamic structural stability during active operation thus severely reduces dimensional accuracy and quality performances of its outputs.
Traditionally, leveling and alignment of a CNC machine are time-consuming and cumbersome tasks with tedious repetition on going back-and-forth checking "bubble" position in-between tiny graduation lines. This monotonous trial-and-error alignment task promotes boredom that often succumbing maintenance engineers to resort for compromising works. All these issues are now a thing of the past with Digi-Pas 2-axis Smart Master Machinist Level and Inclinometer.
Digi-Pas 2-Axis SMART Machinist Level wirelessly displays both X and Y leveling status on a smartphone or laptop PC while you simultaneously adjusting machine’s footings on the floor over Bluetooth range. This greatly cuts downtime and improves quality of installation, setup and maintenance of machines . Digi-Pas 2-axis precision level replaces two units of old-fashioned spirit levels and single-axis Inclinometers.
Powered by advanced MEMS-sensor technology, Digi-Pas precision levels with built-in vibrometers permits highest accuracy of 1-arcsec and simultaneously display 2-D angles with vibration measurements. Its accuracy is certified by accredited calibration and test laboratories traceable to NIST, JIS and DIN. Digi-Pas enables remote, real-time data acquisition, logging and diagnostic/analysis when synced with a PC, making them highly effective when used for installation, setup and maintenance of CNC machines, as well as metrology testing equipment.
Digi-Pas 2-Axis Smart Machinist Levels are used by some of the world’s most technologically advanced companies, research laboratories and government institutions in various industries such as precision machining, metrology, automotive, aerospace, medical, off-shore oil and gas, railways, semiconductor, construction, research and education.
Related Glossary Terms
- 2-D
2-D
Way of displaying real-world objects on a flat surface, showing only height and width. This system uses only the X and Y axes.
- calibration
calibration
Checking measuring instruments and devices against a master set to ensure that, over time, they have remained dimensionally stable and nominally accurate.
- computer numerical control ( CNC)
computer numerical control ( CNC)
Microprocessor-based controller dedicated to a machine tool that permits the creation or modification of parts. Programmed numerical control activates the machine’s servos and spindle drives and controls the various machining operations. See DNC, direct numerical control; NC, numerical control.
- metalworking
metalworking
Any manufacturing process in which metal is processed or machined such that the workpiece is given a new shape. Broadly defined, the term includes processes such as design and layout, heat-treating, material handling and inspection.
- metrology
metrology
Science of measurement; the principles on which precision machining, quality control and inspection are based. See precision machining, measurement.
- precision machining ( precision measurement)
precision machining ( precision measurement)
Machining and measuring to exacting standards. Four basic considerations are: dimensions, or geometrical characteristics such as lengths, angles and diameters of which the sizes are numerically specified; limits, or the maximum and minimum sizes permissible for a specified dimension; tolerances, or the total permissible variations in size; and allowances, or the prescribed differences in dimensions between mating parts.
PRODUCTS
