Contact Details
New LNS Chipblaster S-Series Coolant Systems improve CNC machine performance, take up less floor space and are easy to install and maintain.
The S-Series is available in fixed or variable rate (flow and pressure) models. The variable rate units have tool interfaces that provide independent control of 1, 4 or 8 coolant options, depending on the number of installed coolant-enabled tools. Fixed flow units have one coolant outlet.
A dual cartridge filtration system that filters to 10 or 5 microns, is standard on fixed flow model S-30 and variable flow models SBV-70 and SBV-140. Changing filters is quick and easy while the unit continues to operate without interrupting production. The S-30H fixed flow model has a maintenance free cyclone filter that requires no media change and filters coolant to 2 microns.
Variable flow models have a user-friendly HMI that allows easy adjustment of preset pressure values, changes to settings, and monitoring of various operations. Multi-directional casters enable easy installation and maintenance.
Related Glossary Terms
- computer numerical control ( CNC)
computer numerical control ( CNC)
Microprocessor-based controller dedicated to a machine tool that permits the creation or modification of parts. Programmed numerical control activates the machine’s servos and spindle drives and controls the various machining operations. See DNC, direct numerical control; NC, numerical control.
- coolant
coolant
Fluid that reduces temperature buildup at the tool/workpiece interface during machining. Normally takes the form of a liquid such as soluble or chemical mixtures (semisynthetic, synthetic) but can be pressurized air or other gas. Because of water’s ability to absorb great quantities of heat, it is widely used as a coolant and vehicle for various cutting compounds, with the water-to-compound ratio varying with the machining task. See cutting fluid; semisynthetic cutting fluid; soluble-oil cutting fluid; synthetic cutting fluid.
