Based on the Easy-Cut, the new and improved RushCut is a fully enclosed semi-automatic cut- off machine, designed for quick and easy cutting of carbide rod, high speed steel, and tool ends with diameters between 1/8′′ (3.175 mm) to 1-1/4′′ (31.75 mm). PLC controlled, the RushCut has air actuated work piece clamping and hydraulic feed cutting…
Designed for cutting tool manufacturers and carbide rod processors, this production machine can significantly increase your production rate for cutting carbide and hardened steel rod when compared with manual cut-off machines. It's easy-to-use CNC controls and touch screen operator interface allow for quickly setting parameters in preparation…
The Truing Parameters Calculator is the result of a 3-year collaboration between Rush Machinery, the International Grinding Institute, and Dr. Jeffrey Badger, the ‘Grinding Doc’. Rush Machinery commissioned the project that was later presented at the 2008 CIRP General Assembly in Tokyo by Dražumerič, Badger, Klement, and Krajnik titled “Truing of…
The CH-CM0406 Cut Pre-Point Chamfer Machine makes carbide blanks that are ready for tool grinding. The machine converts blank carbide rods into tool blanks. It is suitable for cutting tool manufacturers that want to make tools from a blank that is already pre-pointed and chamfered. The machine is easy to setup and runs unattended.
Rush Machinery offers the Model FC-350EX and Model FC-350W wheel truing and dressing machines, designed for truing and dressing flats, angles, and radii on diamond and CBN single wheels and multiple wheel packs.
Rush Machinery is offering the CH-CM0203 CNC Carbide Rod Chamfer Machine for chamfering blanks for carbide and HSS cutting tools. The machine comes equipped with a large-capacity magazine, an automatic loader, a flood coolant system, 2-axis servomotor and servo amplifier, and fully automatic CNC.
The 2 Rod “Auto-Cut” CNC Carbide Cut-Off Machine automatically cuts carbide rod into precision lengths. This production machine, designed for cutting tool manufacturers and carbide rod processors, has a large-capacity magazine and an automatic loader to provide hours of unattended operation.
Rush Machinery offers the new Rush Easy-Cut XL semiautomatic carbide cut-off machine for quick and easy cutting of carbide flat stock up to 2”x4” or rod and tool ends with diameters between 1/8” to 2”.
The BMT-150M On-Machine Balancing Kit from Rush Machinery for balancing wheels and wheel packs on truers or grinding machines. The kit comes with everything you need to get started.
Rush offers the Models FC-200D, FC-300D, FC-500D and FC-200CNC polycrystalline tool grinders, which allow for economical manufacturing and regrinding of PCD, CVD, PCBN, carbide and HSS tools. These machines grind angles and radii on standard and special turning and milling inserts, boring tools, milling cutters, grooving tools, reamers and special…
Rush Machinery Inc.'s Drill and Tool Grinders have helped thousands lower their holemaking costs through higher precision, faster production, less down time and reduced tool inventory.
Ideal for tool manufacturers, grinding wheel manufacturers, and production grinding facilities, the economical Model FC-250W Diamond/CBN Wheel Truing and Dressing Machine from Rush Machinery Inc. is for truing and dressing flats, angles, and radii on diamond and CBN single wheels and multiple wheel packs.
The Rush Grinding Fluid Filtration system offers an optional magnetic separator prefilter and collection unit to handle high volume swarf applications with ease.
Rush Machinery Inc. offers a series of airbearing end mill grinding fixtures that allow precision sharpening of end mills, reamers, shell mills and other cutters.
The FC-250EX and FC-700EX Automatic Diamond and CBN Wheel Truing and Dressing Machines from Rush Machinery, Rushville, N.Y., are designed for truing and dressing of flats, angles and radii on diamond and CBN single wheels and multiple wheel packs, according to a Rush news release.
The Models FC-250EX and FC-700EX from Rush Machinery Inc. are designed for truing and dressing of flats, angles, and radii on diamond and CBN single wheels and multiple wheel packs.
Rush Machinery Sales Manager Doug Lewis highlighted the features of the CH-CM0206 Auto-Cut machine at the Rush booth during Eastec 2023, and noted that the machine is ideal for tool manufacturers and carbide rod processors.
Jeff Badger, Ph.D., a grinding expert and the author of CTE's Grinding Doc column, provides a practical tour of the Truing Parameters Calculator he helped develop along with Rush Machinery and the International Grinding Institute.
Michael Coffey, a field service engineer for Rush Machinery, demonstrates a new 360-degree guard for the company’s FC-350W wheel truing and dressing machine with Rush Vision and Auto View.
This Rush Machinery video offers an overview of the company’s CH-CM0406 Cut-Prepoint-Chamfer Machine, which converts full length blank carbide rods into tool blanks that are ready for fluting and finishing grinding.
Watch Cutting Tool Engineering's special three-part video report that follows along as Rush Machinery in Rushville, N.Y., and Jeffrey Badger, Ph.D., a.k.a. the Grinding Doc, collaborate to establish scientific truing parameters. The report encompasses episodes 83, 84 and 85 of CTE's Grinding Doc video series.
Thanks to a collaboration between Dr. Jeffrey Badger and Rush Machinery in Rushville, N.Y., shops now have some practical guidelines when it comes to truing parameters. Badger shares some of this new-found advice in 85th episode of Cutting Tool Engineering's Grinding Doc video series.
For the 84th episode of the CTE Grinding Doc video series, Dr. Jeffrey Badger offers some preliminary results and observations from his work with Rush Machinery to establish scientific truing parameters.
For the 83rd episode of Cutting Tool Engineering's Grinding Doc video series, Dr. Jeffrey Badger visits with Rush Machinery in Rushville, N.Y., to begin a three-part series devoted to establishing scientific truing parameters. With the help of Rush Machinery President Bill Freese, Badger conducts a series of truing tests using the Grinding…
Produced as an online complement to the October 2009 Productive Times article in Cutting Tool Engineering, this brief video looks at Myles Tool's decision to use a wheel truing machine from Rush Machinery.
Rush Machinery will showcase a range of equipment at the 2022 International Manufacturing Technology Show (IMTS) including wheel truing and dressing machines, CNC and semi-automatic carbide rod cut-off machines, and a CNC carbide rod chamfer machine.
At this year’s Eastec trade show, Rush Machinery plans to display the FC-350W wheel truing and dressing machine with new accessories and functionality as well as the Auto-Cut carbide rod cut-off machine.
Rush Machinery will showcase a balancing machine and a wheel truing and dressing machine at the 2022 International Manufacturing Technology Show (IMTS), being held at Chicago’s McCormick Place from September 12–17. Rush Machinery can be found in Booth 237233.
