Tungaloy is expanding its AH9130 drill head grade series to include the DMP drill head line of the DrillMeister head-changeable drill series.
DrillMeister features a unique self-locking interface that interlocks between the drill head and tool body, enabling a simple and quick tool exchange. Operators can replace the tool without having to remove the drill body from the adapter or re-measure tool offset values, thus saving a great amount of tool setup time.
This AH9130 grade expansion encompasses the DMP line of general-purpose drilling, succeeding the popular DMC drill head for precision drilling. Developed for drilling, AH9130 is a nano-multilayer PVD coating consisting of three distinctive layers. This coating configuration adds multifunctional characteristics to the grade, including wear, fracture and oxidation resistances, as well as eliminating build-up edge and delamination, providing all characteristics required for the grade to enable long and predictable tool life in drilling operations.
At a glance:
New DMP drill head are available in diameters from 10.0 mm through 19.5 mm (in increments of 0.1 mm)
Nano-multilayer PVD coating including three characteristic layers
The coating offers multifunctional characteristics of wear, fracture and oxidation resistances, as well as eliminates build-up edge and delamination for improved insert life and predictability
Tool-coating process performed at low temperature (500° C), compared to chemical vapor deposition (1,000° C). Employs electric field to generate necessary heat for depositing coating on a tool’s surface. See CVD, chemical vapor deposition.
Additional Products from Tungaloy-NTK America, Inc.
DrillForce-Meister uses exchangeable drill tips designed to efficiently open large diameter holes ranging from 20.0 mm to 40.0 mm (.787″ – 1.575″) at a lower cost. With the drill tips being exchangeable, DrillForce-Meister not only eliminates the need for regrinding and recoating, as is the case…
TungMeister is designed to reduce a significant amount of tool changeover time through the ability to replace used heads instead of an entire tool. Since it takes no more than one minute for tool exchange, setup time can significantly be reduced to as short as one tenth of the time it would…
DeepTri-Drill is designed to provide productivity and application security for drilling deep holes on standard machining centers and CNC boring machines, while ensuring easy tool management by eliminating the need for regrinding. The insert features chip splitters that allows effective chip…
DrillMeister incorporates a unique self-locking interface that enables simple and secure drill head exchange. Since drill heads can be replaced without having to remove the drill body from the spindle tool setup time can significantly be reduced, eliminating presetting, offset, and touch off of the…
MillQuadFeed is a new generation of high feed milling cutters, offering two options of insert geometries that cover various high feed milling application needs. Versatile ZER geometry generates light cutting load at great depths of cut, enabling increased cutting depths and reduced number of…
This expansion includes two new TCL18 inserts with 1.75 mm and 2.5 mm thicknesses, expanding the existing line of 1.5 mm, 2.0 mm, and 3.0 mm inserts. The inserts are available in grade AH7025, a nano-multilayer PVD coating with high-aluminum content that provides hardness and adhesion to the grade…
TungForce-Feed features a large rake angle and positive inclination angle on the cutting edge that provide excellent chip control while reducing spindle loads and energy consumption. This allows a higher feed rate or greater depth of cut to be applied for improved efficiency and, by working in…
Setting the tool to the correct center height is one of the important factors to achieve the right dimension tolerances and surface integrity of the component. The new setting device enables easy, systematic, and accurate settings of tool center height. Its serrated interface with a magnetic…
The latest additions include inserts with 0.8 mm (.032″) nose radius in versatile AH725 grade. 0.8 mm nose radius will provide the cutting edge with strength, preventing edge fracture for predictable tool life. In addition, AH725 enhances the insert’s wear resistance during machining of various…
FH3125 is a new grade specifically developed to enhance the guide pad’s wear resistance in machining various materials. The dedicated carbide substrate of the grade is designed to reduce guide pad breakage, providing long and predictable tool life in deep hole processes. The corners of both ends of…
PRODUCTS
