Tungaloy is expanding its AH9130 drill head grade series to include the DMP drill head line of the DrillMeister head-changeable drill series.
DrillMeister features a unique self-locking interface that interlocks between the drill head and tool body, enabling a simple and quick tool exchange. Operators can replace the tool without having to remove the drill body from the adapter or re-measure tool offset values, thus saving a great amount of tool setup time.
This AH9130 grade expansion encompasses the DMP line of general-purpose drilling, succeeding the popular DMC drill head for precision drilling. Developed for drilling, AH9130 is a nano-multilayer PVD coating consisting of three distinctive layers. This coating configuration adds multifunctional characteristics to the grade, including wear, fracture and oxidation resistances, as well as eliminating build-up edge and delamination, providing all characteristics required for the grade to enable long and predictable tool life in drilling operations.
At a glance:
New DMP drill head are available in diameters from 10.0 mm through 19.5 mm (in increments of 0.1 mm)
Nano-multilayer PVD coating including three characteristic layers
The coating offers multifunctional characteristics of wear, fracture and oxidation resistances, as well as eliminates build-up edge and delamination for improved insert life and predictability
Tool-coating process performed at low temperature (500° C), compared to chemical vapor deposition (1,000° C). Employs electric field to generate necessary heat for depositing coating on a tool’s surface. See CVD, chemical vapor deposition.
Additional Products from Tungaloy-NTK America, Inc.
Tungaloy continuously expands the advantages of its AddMeisterDrill exchangeable-head drill solution into a smaller diameter range. Ten new DMC precision drill heads have been added to the line for diameters ranging from 4.0 mm (.157″) to 4.9 mm (.192″), expanding the entire range from 4.0 mm (.157…
Tungaloy has expanded its AddInternalCut groove turning tool series to include new TCIG12 inserts as well as additional TCIG10 inserts that allow a maximum groove width of 3.0 millimeters (.118 inches) in bores as small as 10.5 millimeter (.413 inch) diameter.
DoTriple-Mill and DoQuad-Mill face milling cutters now offer AH3225 grade inserts with Tungaloy’s latest coating technology. The nano-multilayer structure, strong coating-substrate adherence, and super-hard coating surface, engineered, the coating provide the grade with superior wear and fracture…
Turning threads on hardened parts can be a challenge when using coated cemented carbide inserts: the cutting edge rapidly wears out before finishing the entire thread profiles, inhibiting greater feed rates and D.O.Cs. to be applied for increased productivity. Of all Tungaloy CBN grades, BX330…
AddForceBarrel uses inserts whose cutting edges have a large-radius arc of either 20 mm (.787″) or 30 mm (1.181″), designed for semi-finish profiling of 3D surfaces. Just like the TungMeister’s barrel milling heads, AddForceBarrel provides much greater engagement area between the cutting edge and…
The coarse pitch cutters retain a prominent feature of TungForce-Rec that provides maximum tool rigidity during demanding operations. In addition, flutes on the cutter body are designed with large chip space to promote smooth evacuation, preventing chips from clogging during operations.
348 inserts added to stainless steel turning grade series of AH6225, AH6235, and T6215. AH6225 is a first-choice grade designed to provide excellent machining performance in general stainless steel turning operations, extending from continuous to light interrupted cuts. AH6235 is another PVD-coated…
The DMH drill head geometry is designed to protect drill corners and provide effective chip evacuation, making the drill head suited for applications that involve drilling holes through thin plates. The increased cutting edge strength resists thin-plate snapback and wear from exit burrs, preventing…
NS chipbreaker features a three-dimensional chipbreaker that is directly engraved on the PCD tip using the latest technology. This allows the generation of short chips during the machining of gummy metals such as aluminum and copper alloys, significantly reducing machine downtime due to chip…
TungCut CBN-tipped STH inserts provide the solution to these challenges with a completely new turning concept. In the shape of TungCut grooving insert, the new STH inserts perform finish-turning by feeding the insert sideways on the worked surface. Its CBN cutting edge features a unique wiper…
PRODUCTS
