Ensure long machine tool, cutting tool and tool holder life while reducing stress on your spindle with the ATC Alignment Tool from BIG Kaiser.
When automatically loading a tool holder, any misalignment of the ATC gripper to the spindle may cause damage to the spindle taper. A misaligned, clamped tool holder leads to increased runout, thereby shortening the life of the machine tool, cutting tool and tool holder. The ATC Alignment Tool allows operators to easily avoid such problems by making sure the ATC gripper aligns the tool with extreme precision, which prevents any collision and potential damage. The tool may also be used to align the ATC gripper to the magazine tool pockets.
"The ATC Alignment Tool functions as a preventative maintenance tool for operators, but also is useful during repairs, and even during the original machine and tool magazine setup," says Jack Burley, BIG Kaiser vice president of sales and engineering. "It's an indispensable accessory for machine tool repair and installation operators."
The tool features a built-in stylus that determines the high/low values when the plug is slowly rotated. The values are displayed on a 10µm/div. dial indicator and reveal the eccentric direction, half of the gap between the high and low is the eccentric amount. Such eccentricities would be otherwise imperceptible.
BIG KAISER is expanding its range of BIG Capto toolholders with the addition of a new size, C4, which is becoming increasingly popular as a quick-change system for turret tooling on lathes.
BIG KAISER says its hydraulic chucks for Swiss-type lathes are the first improvement to this technology in more than 30 years. These toolholders use a single wrench, which makes for a quick and easy change of the cutting tools on a gang slide.
BIG KAISER introduces two versions of the C-Centering Cutter, a multifunction cutter capable of spot drilling, centering and chamfering. The C-Centering Cutter is an indexable cutter that uses a specialized insert that can start a hole from a solid piece, something extremely difficult to do. It can…
BIG KAISER presents the Torque Fit, a tightening fixture for collet chucks with an integrated torque measuring system. This device makes it easy to ensure that a collet chuck is correctly tightened.
BIG KAISER Precision Tooling Inc. has added the Dyna Contact to its product offering. The ceramic taper gage allows inspection of machine spindle tapers at a glance.
BIG KAISER announced its new Level Master Wireless, a high-precision device for the leveling of machine tool tables. The Level Master Wireless adds wireless connectivity to enable leveling information to be read from a separate display device, making it easier to ensure that a precision level is…
BIG KAISER’s UNIFLEX system is a 3D zero-point clamping system designed to allow parts with curved surfaces to be held rigidly for various operations and be adjusted to different height requirements. The UNIFLEX system is available in two diameters: 25.4mm and 50mm.
The precision and ruggedness of BIG KAISER boring heads deliver measurable performance advantages, significantly reducing finishing cost and cycle time. This is proven through the development of the EWE digital boring head.
BIG KAISER announces its HDC Straight Shank holder to the market, used for increased versatility. The slim design provides superior balance, concentricity and is suitable for reaching into confined areas.
BIG KAISER introduces the Base Master Red, a high-precision touch sensor that rapidly determines workpiece offsets and tool lengths, and the Base Master Mini, a thin, compact tool offset sensor.
PRODUCTS
