In response to both the growth in quantity and complexity of structural aerospace components, an updated range of CoroMill 390 Silent Tools has been developed by Sandvik Coromant. The upgraded Silent Tools dampening technology will allow machine shops to machine deep pockets on titanium aerospace frame parts with greater security and higher metal-removal rates.
“Driven by increasing passenger travel demand and accelerated asset replacement cycles, the commercial aerospace sector is expected to continue its decade-long trend of above-average growth rates,” says Thomas Wikgren, product manager, shoulder milling at Sandvik Coromant. “In tandem with more advanced component design, including the increased deployment of deep pockets in structural parts (to save weight and fuel), there is a corresponding need to produce these features as efficiently as possible while maintaining the highest quality levels. As a result, CoroMill 390 end mills with integrated damping Silent Tools technology have been updated to take pocket machining to the next level.”
Pockets are the most common feature in titanium structural parts for aircraft, often featuring depths of more than four times the diameter of the cutter, which is significant in such a challenging material. For this reason, there are high demands for process stability and quality, as well as metal-removal rates.
With these factors in mind, the development of an effective cutting tool offers machine shops the opportunity to achieve genuine competitive gain. CoroMill 390 Silent Tools provide light-cutting insert geometries and high performance grades that deliver low cutting forces and vibration-free machining for secure, cost-effective milling.
The new CoroMill 390 Silent Tools can be ordered in diameters from 20 to 32 mm. It is available for both the new insert size 07, as well as insert size 11, with options for either cylindrical shank or Coromant Capto coupling.
Machining operation in which metal or other material is removed by applying power to a rotating cutter. In vertical milling, the cutting tool is mounted vertically on the spindle. In horizontal milling, the cutting tool is mounted horizontally, either directly on the spindle or on an arbor. Horizontal milling is further broken down into conventional milling, where the cutter rotates opposite the direction of feed, or “up” into the workpiece; and climb milling, where the cutter rotates in the direction of feed, or “down” into the workpiece. Milling operations include plane or surface milling, endmilling, facemilling, angle milling, form milling and profiling.
What makes the CoroMill Dura stand out compared to the former versatile concept and competitor end mills is its WhisperKut technology. The CoroMill Dura is available from two to seven flutes with 1-4×D cutting length, with and without a chip divider. The end mills can be reconditioned up to three…
The drill features a new grade, with an improved multi-layer physical vapor deposition (PVD) coating. The results are enhanced wear resistance, better tool life and an overall increase in productivity and thereby reduced cost-per-component.
Individually, the CoroDrill 462 offers high performance hole making up to 3.00 mm. Ideal for drilling both blind and through holes, the drill is capable of machining a variety of ISO materials, including ISO P, M, K, N, S, O and H. With a drill depth of 6xD, the CoroDrill 462 offers manufacturers a…
CoroCut QI is divided into internal grooving and face grooving application areas, and is an upgrade of the T-max Q-Cut® 151.3 program. The improved design allows for greater chip control, a 10% productivity increase, 20% improved tool life aided by tighter edge-rounding tolerances and internal…
Using the method and software, manufacturers can fully optimize their thread turning operations. As part of the solution, CoroPlus Tool Path helps users develop optimized OptiThreading tool paths that specifically overcome the challenge of chip control. This is achieved by offering tool paths that…
The CoroMill MH20 complements existing products in the CoroMill range, and fills a strategic gap in the high feed indexable milling product line. Designed to deliver reliability with minimal vibration, the CoroMill MH20 has been adapted for applications where components are notoriously difficult to…
CoroPlus® Connected is used alongside the existing Silent Tools™ Plus, a digitally connected damped boring bar from Sandvik Coromant. Having been awarded first place in the International Manufacturing Technology Show (IMTS) Production Innovation contest in 2018, Silent Tools™ Plus helps customers…
Sandvik Coromant’s new turning grades are optimized with these machining challenges in mind. The introduction assortment of the S205 includes 36 items, with more to be added in spring of 2021. The Ceramic CC6165 grade is also available in a range of assortments to meet the demands of varied…
T-Max P inserts are specifically designed for high-performance turning in modern production, while the Coromant Capto is a modular, quick-change tooling concept, which offers a large variety of extension and reduction adaptors to support assembling of tools with different lengths and design…
The tool supply consists of software, hardware and supporting service elements. Using the CoroPlus® Tool Supply hardware, manufacturers can easily store and keep track of tools. Storage options can be tailor made according to facility demands, with tool vending solutions ranging from open stock,…
PRODUCTS
