Walter has introduced the DC150 Perform 5 × Dc drill, a versatile and cost-effective solid-carbide drill that can be used universally with all materials and with a broad range of workpieces. Like the others in the DC150 Perform Line, the new drill is suitable for use anywhere small and medium batch sizes need to be machined with high precision and process reliability coupled with a high level of cost efficiency and wide applicability.
The new DC150 Perform 5 × Dc is designed to be used without internal coolant. Proven features of the existing DC150 Perform drill family, such as wear-resistance and good chip evacuation, have been included in this latest entry, along with geometry which includes a 140° point angle for high positioning accuracy.
The new DC150 Perform 5 × Dc solid-carbide drill expands the existing range of DC150 Perform variants. Until now, the DC150 Perform Line included length to diameter ranges of 3, 5, 8, and 12 x Dc, all with internal coolant capability. The new 5 x Dc for external coolant complements the existing 3 x Dc, offering for external coolant and allows the end user to select the product which best fits the application and cost basis of the operation.
The new variant continues Walter’s vision for the Perform Line, which is "to offer customers the same outstanding Walter products, but without having to pay for a level of performance that’s not necessarily needed."
Fluid that reduces temperature buildup at the tool/workpiece interface during machining. Normally takes the form of a liquid such as soluble or chemical mixtures (semisynthetic, synthetic) but can be pressurized air or other gas. Because of water’s ability to absorb great quantities of heat, it is widely used as a coolant and vehicle for various cutting compounds, with the water-to-compound ratio varying with the machining task. See cutting fluid; semisynthetic cutting fluid; soluble-oil cutting fluid; synthetic cutting fluid.
Walter has unveiled the Walter Cut G1221-P, an innovative grooving boring bar with precision cooling, for recessing and internal grooving. This monoblock boring bar has two coolant holes.
Walter has introduced three new Walter Cut GX Tiger·tec Silver CVD grooving and parting grades—the WKP13S, WKP23S and WKP33S—for use on steel and cast-iron applications. These have been introduced in combination with Walter's geometries UD4, UA4, UF4, RD4 along with plunge grooving and parting…
Walter has introduced the M2136, a multitooth close-pitch finishing cutter that features a high degree of process reliability coupled with superior cost effectiveness, particularly with cast iron, thanks in part to its eight cutting edges per insert. These stable, negative inserts promote not only…
Walter says its new FM5 finishing and RM5 roughing indexable insert geometries deliver optimal cooling, longer tool life, and increased productivity in high-temperature alloy and stainless-steel machining. The new inserts owe their effectiveness, in part, to their "jet guiding geometry,"…
Walter has expanded the capabilities of its popular Walter BLAXX M3024 heptagon milling cutter with new wiper inserts. The inserts, which have two right-hand and two left-hand cutting edges, were specifically developed for the Walter BLAXX M3024, and allow it to be used for finishing operations.
Walter has added to its range of solid-carbide milling cutters with the introduction of its MC232 Perform product line. This versatile, cost-effective new cutter type is available with 2, 3 or 4 flutes, in a diameter range of 1/8 in. to 5/8 in. (2 to 20 mm).
Walter says it has introduced a new and innovative cutting geometry, the MS3, teamed with a new high tech grade, WSM01. The new WSM01 grade, manufactured using the HiPIMS (high-power impulse magnetron sputtering) method, provides extremely smooth surfaces that are characterized by excellent layer…
Walter has expanded the productive and cost effective Walter Titex Perform lineup of TC115/TC216 taps with an array of new sizes. The Perform lineup of products is one of three categories to Walter Titex threading tools. Perform tools are products that provide an economical solution with focused…
Walter has introduced the Walter Cut—Modular System G2612/2622, new SX system tools for deep grooving and parting operations that reportedly save time and cost. Suitable for all machine types, and for grooving and parting-off ranging from small to large diameters, the system allows users to simply…
Walter has introduced two new products for the DC150 drill lineup: 3xD and12xD, both with coolant through the tool body. The DC150 is positioned in the Perform line—a tough, versatile and cost effective Walter Titex family of solid-carbide drills. The two, new length-to-diameter ratio drills join…
PRODUCTS
