Walter has unveiled its M2025/M2026 octagon finishing facemills designed to reporedly deliver superior surface quality on large cast iron components. For these types of components, optimal sealing surface function can only be guaranteed when the surfaces are completely flat, and the new finishing mill tool ranges are built to produce that result. Plus, their high feeds and cutting speeds cut processing times and their ease of handling reduces setup requirements, saving time and cost.
These facemills are equipped with efficient 16-edged octagonal peripheral inserts and three, 4-edged, wiper inserts. The basic shape of the wiper inserts is negative, while the cutting edge geometry is positive. Convex edge wiper inserts ensure a high level of surface quality. All inserts are precision ground and the cutter bodies, likewise, feature precision insert seats, and cutting edges can be changed rapidly thanks to the wedge clamping of the octagonal inserts. Tool setup savings are gained because no adjustment of the wiper cutting edges is necessary.
In addition, process reliability is enhanced by the highly precise design and manufacture of the inserts and the tool body. The inserts, which are completely ground, are available in grades WAK15, WKP25S and WHH15, and are particularly suitable for cast iron workpieces.
Runs endmills and arbor-mounted milling cutters. Features include a head with a spindle that drives the cutters; a column, knee and table that provide motion in the three Cartesian axes; and a base that supports the components and houses the cutting-fluid pump and reservoir. The work is mounted on the table and fed into the rotating cutter or endmill to accomplish the milling steps; vertical milling machines also feed endmills into the work by means of a spindle-mounted quill. Models range from small manual machines to big bed-type and duplex mills. All take one of three basic forms: vertical, horizontal or convertible horizontal/vertical. Vertical machines may be knee-type (the table is mounted on a knee that can be elevated) or bed-type (the table is securely supported and only moves horizontally). In general, horizontal machines are bigger and more powerful, while vertical machines are lighter but more versatile and easier to set up and operate.
Metal-removing edge on the face of a cutter that travels in a plane perpendicular to the axis. It is the edge that sweeps the machined surface. The flat should be as wide as the feed per revolution of the cutter. This allows any given insert to wipe the entire workpiece surface and impart a fine surface finish at a high feed rate.
Walter has introduced the Walter has introduced the M2471, a copy milling cutter with excellent cost efficiency thanks to its high metal-removal rate -- even on low performance machines, coupled with lower cutting material costs resulting from its eight cutting edges (four per side) per insert.…
Walter has unveiled the Walter Cut G1221-P, an innovative grooving boring bar with precision cooling, for recessing and internal grooving. This monoblock boring bar has two coolant holes.
Walter has introduced three new Walter Cut GX Tiger·tec Silver CVD grooving and parting grades—the WKP13S, WKP23S and WKP33S—for use on steel and cast-iron applications. These have been introduced in combination with Walter's geometries UD4, UA4, UF4, RD4 along with plunge grooving and parting…
Walter has introduced the M2136, a multitooth close-pitch finishing cutter that features a high degree of process reliability coupled with superior cost effectiveness, particularly with cast iron, thanks in part to its eight cutting edges per insert. These stable, negative inserts promote not only…
Walter says its new FM5 finishing and RM5 roughing indexable insert geometries deliver optimal cooling, longer tool life, and increased productivity in high-temperature alloy and stainless-steel machining. The new inserts owe their effectiveness, in part, to their "jet guiding geometry,"…
Walter has expanded the capabilities of its popular Walter BLAXX M3024 heptagon milling cutter with new wiper inserts. The inserts, which have two right-hand and two left-hand cutting edges, were specifically developed for the Walter BLAXX M3024, and allow it to be used for finishing operations.
Walter has added to its range of solid-carbide milling cutters with the introduction of its MC232 Perform product line. This versatile, cost-effective new cutter type is available with 2, 3 or 4 flutes, in a diameter range of 1/8 in. to 5/8 in. (2 to 20 mm).
Walter says it has introduced a new and innovative cutting geometry, the MS3, teamed with a new high tech grade, WSM01. The new WSM01 grade, manufactured using the HiPIMS (high-power impulse magnetron sputtering) method, provides extremely smooth surfaces that are characterized by excellent layer…
Walter has expanded the productive and cost effective Walter Titex Perform lineup of TC115/TC216 taps with an array of new sizes. The Perform lineup of products is one of three categories to Walter Titex threading tools. Perform tools are products that provide an economical solution with focused…
Walter has introduced the Walter Cut—Modular System G2612/2622, new SX system tools for deep grooving and parting operations that reportedly save time and cost. Suitable for all machine types, and for grooving and parting-off ranging from small to large diameters, the system allows users to simply…
PRODUCTS
