Parting and Grooving Inserts

Contact Details

Walter USA LLC

Address

N22 W23977 RidgeView Pkwy. W.

Waukesha

53188

WI

United States

Map It

Phone

800-945-5554

Fax

262-347-2501

View Website

Send Email

View Buyers Guide

January 01, 2014

Walter USA LLC has introduced three new insert geometries that produce superior results in parting and grooving operations. Walter's CE4 geometry for medium to high feed rates features a tough cutting edge and good chip compression; the universal CF5 geometry for long-chipping materials and medium feed rates; and the CF6 geometry for low feed rates, non-ferrous metals, small diameters or thin-walled tubes.

All three geometries feature Walter's Tiger-tec Silver CVD coating technology which increases toughness and decreases machining time with optimized microstructure and resistance to thermal stress. They can be supplied in insert widths from 1.5 to 6.0mm and are currently available in the WSM33S and WSM43S cutting materials. This combination of factors enables the new geometries to produce superior chip formation and burr resistance, improved process reliability and cycle times, and an overall boost in price/performance ratio.

Related Glossary Terms

burr
burr
Stringy portions of material formed on workpiece edges during machining. Often sharp. Can be removed with hand files, abrasive wheels or belts, wire wheels, abrasive-fiber brushes, waterjet equipment or other methods.
chemical vapor deposition ( CVD)
chemical vapor deposition ( CVD)
High-temperature (1,000° C or higher), atmosphere-controlled process in which a chemical reaction is induced for the purpose of depositing a coating 2µm to 12µm thick on a tool’s surface. See coated tools; PVD, physical vapor deposition.
feed
feed
Rate of change of position of the tool as a whole, relative to the workpiece while cutting.
grooving
grooving
Machining grooves and shallow channels. Example: grooving ball-bearing raceways. Typically performed by tools that are capable of light cuts at high feed rates. Imparts high-quality finish.
microstructure
microstructure
Structure of a metal as revealed by microscopic examination of the etched surface of a polished specimen.
parting
parting
When used in lathe or screw-machine operations, this process separates a completed part from chuck-held or collet-fed stock by means of a very narrow, flat-end cutting, or parting, tool.

Additional Products from Walter USA LLC

WBH10C, WBH10 and WBH20 PCBN Inserts

Walter has introduced new PCBN grades for improved turning of hardened steel up to 65 HRC. These grades (WBH10C, WBH10 and WBH20) provide users with an array of benefits. High-quality surface finish due to unique new wiper geometry (MW2) and long tool life with the new TiAlSiN-coated grade (WBH10C…

TC117/TC217 Advance Cut Taps

Walter has announced the introduction of the TC117/TC217 Advance cut taps for high threading productivity in a wide range of different materials. The Advance lineup is one of the three categories to Walter threading tools.

WKV10 and WKV20 Turning Inserts

Walter has added two new cast iron insert grades to its Perform Line family of turning tools, the WKV10 and WKV20. These new negative geometry grades are versatile, cost-effective inserts and are ideal for those who machine small or medium batch sizes. These new grades in the Perform Line…

Walter Xpress Fast Delivery Service Includes Indexable Inserts

Walter has added indexable inserts to the range of products available via the Walter Xpress fast delivery service. Previously the special custom solutions available with Walter Xpress had been limited to round tools and tools that hold indexable inserts.

Xtra·tec XT Milling Tools

Walter has introduced its next generation of milling tools: the Xtra·tec XT (Xtended Technology). Designed to achieve increased productivity and process reliability, this new generation of milling cutters is being launched with initial offerings of shoulder milling cutters and a facemilling cutter…

M4000 Milling Line Inserts for use in F2010 Program

Walter has expanded its milling program with additions that allow the universal, square system inserts of its versatile M4000 milling line to be used in its F2010 program, which is a milling family that utilizes a replaceable and adjustable cartridge.

D3120 Indexable Insert Drill

Walter has introduced the D3120, an indexable insert drill built to provide trouble-free drilling in virtually all conditions. It features square positive indexable inserts with four cutting edges, enabling it to reduce cost per cutting edge.

WMP45G Grade Indexable Insert

Walter has expanded its Tiger·tec Gold line of indexable inserts with the addition of the WMP45G grade made specifically to handle the challenges of turbine blade machining. The new WMP45G grade, available as round indexable inserts for the F2334R copy milling cutter, is for facemilling and copy…

DC150 Perform 5 × Dc Drill

Walter has introduced the DC150 Perform 5 × Dc drill, a versatile and cost-effective solid-carbide drill that can be used universally with all materials and with a broad range of workpieces. Like the others in the DC150 Perform Line, the new drill is suitable for use anywhere small and medium batch…

Walter Cut MX Grooving Inserts

The Walter Cut MX grooving inserts deliver high levels of flatness and surface quality with their tangentially-mounted arrangement in the G3011/G3021 holders. Four cutting edges per insert multiply user productivity and, if one cutting edge breaks, the other cutting edges remain usable.