Parting and Grooving Inserts

Contact Details

Walter USA LLC

Address

N22 W23977 RidgeView Pkwy. W.

Waukesha

53188

WI

United States

Map It

Phone

800-945-5554

Fax

262-347-2501

View Website

Send Email

View Buyers Guide

January 01, 2014

Walter USA LLC has introduced three new insert geometries that produce superior results in parting and grooving operations. Walter's CE4 geometry for medium to high feed rates features a tough cutting edge and good chip compression; the universal CF5 geometry for long-chipping materials and medium feed rates; and the CF6 geometry for low feed rates, non-ferrous metals, small diameters or thin-walled tubes.

All three geometries feature Walter's Tiger-tec Silver CVD coating technology which increases toughness and decreases machining time with optimized microstructure and resistance to thermal stress. They can be supplied in insert widths from 1.5 to 6.0mm and are currently available in the WSM33S and WSM43S cutting materials. This combination of factors enables the new geometries to produce superior chip formation and burr resistance, improved process reliability and cycle times, and an overall boost in price/performance ratio.

Related Glossary Terms

burr
burr
Stringy portions of material formed on workpiece edges during machining. Often sharp. Can be removed with hand files, abrasive wheels or belts, wire wheels, abrasive-fiber brushes, waterjet equipment or other methods.
chemical vapor deposition ( CVD)
chemical vapor deposition ( CVD)
High-temperature (1,000° C or higher), atmosphere-controlled process in which a chemical reaction is induced for the purpose of depositing a coating 2µm to 12µm thick on a tool’s surface. See coated tools; PVD, physical vapor deposition.
feed
feed
Rate of change of position of the tool as a whole, relative to the workpiece while cutting.
grooving
grooving
Machining grooves and shallow channels. Example: grooving ball-bearing raceways. Typically performed by tools that are capable of light cuts at high feed rates. Imparts high-quality finish.
microstructure
microstructure
Structure of a metal as revealed by microscopic examination of the etched surface of a polished specimen.
parting
parting
When used in lathe or screw-machine operations, this process separates a completed part from chuck-held or collet-fed stock by means of a very narrow, flat-end cutting, or parting, tool.

Additional Products from Walter USA LLC

Single-Sided Indexable Inserts with HU5 Geometry

Walter has introduced single-sided indexable inserts with new HU5 geometry. These HU5 inserts can dramatically boost productivity particularly in rough machining of stainless steels and heat-resistant superalloys and secondarily in steel. They are typically used in machining AISI 316 material,…

Perform Lineup of TC115/TC216 Taps

Walter has expanded its productive and cost-effective Walter Perform lineup of TC115/TC216 taps with an array of new sizes, giving these highly flexible taps an even wider range of application in a variety of materials. They provide an excellent means of cost savings, especially with small and…

M4130 Shoulder Milling Cutter

Walter has introduced the M4130, a shoulder milling cutter that reduces costs through its ability to use Walter’s universal M4000 system inserts in a variety of different applications. It’s soft cutting action makes the M4130 shoulder milling cutter ideal for roughing operations involving steel,…

M2028/M2029 Octagon Facemilling Cutters

The M2028/M2029 octagon facemilling cutters from Walter delivers high feed rates and lower tooling costs for a wide variety of roughing and finishing applications, thanks in large measure to their stable, negative, double-sided inserts that feature 16 cutting edges.

TC620 Supreme Thread Milling Cutter

Walter has released the TC620 Supreme thread milling cutter, enabling threading that combines maximum productivity with superior process reliability. Its multiple-row concept with its lower cutting forces not only reduces machine time and wear, but also improves process reliability and handling,…

DC160 X∙treme Evo Advance Solid-Carbide Universal Drill

The DC160 X∙treme Evo Advance solid-carbide universal drill from Walter, features exceptional positioning accuracy. This is achieved with its innovative new thinner web at the point; rapid guidance in the hole due to the advanced positioning of the margins; and high productivity in many different…

M4791 Routing Cutter

Walter has expanded its cost-effective, flexible M4000 milling cutter system with the addition of the new M4791 routing cutter. Capable of plunging in solid material and producing a true flat bottom, the new routing cutters have an application in both lathes and machining centers.