Sphinx Nirox

Contact Details

BIG DAISHOWA Inc.

Address

2600 Huntington Blvd.

Hoffman Estates

60123

IL

United States

Map It

Phone

224-770-2999

View Website

Send Email

View Buyers Guide

June 24, 2020

BIG KAISER Precision Tooling introduces the Nirox high-performance drill from Sphinx, the newest addition to its cutting tool lineup. Available in diameters from 0.30-3.00mm, the Nirox was developed for use at low cutting speeds in unstable environments. The Nirox geometry has a degressive helix angle equal to 30 degrees at the point and is designed for accurate and precise hole location up to 9xD.

A modern, TiAlSiN based coating allows for enhanced chip and coolant evacuation in difficult to machine and adhesive materials, such as titanium, Inconel, stainless steel, hardened steel and CoCr alloys.

Related Glossary Terms

alloys
alloys
Substances having metallic properties and being composed of two or more chemical elements of which at least one is a metal.
coolant
coolant
Fluid that reduces temperature buildup at the tool/workpiece interface during machining. Normally takes the form of a liquid such as soluble or chemical mixtures (semisynthetic, synthetic) but can be pressurized air or other gas. Because of water’s ability to absorb great quantities of heat, it is widely used as a coolant and vehicle for various cutting compounds, with the water-to-compound ratio varying with the machining task. See cutting fluid; semisynthetic cutting fluid; soluble-oil cutting fluid; synthetic cutting fluid.
helix angle
helix angle
Angle that the tool’s leading edge makes with the plane of its centerline.

Additional Products from BIG DAISHOWA Inc.

SPERONI SPI (Simple Post Interface)

SPI Presetter Option Speeds Up Data Transfer to the Machine Center

As opposed to measuring, printing a label and punching the data into the control, SPI prints a tool label with a QR code at the presetter that’s then read by the SPI module at the machine control. The system can also be configured to send measurements directly into the tool NC’s offset table.

EWE Digital Boring Heads

Sizes added to to EWE Digital Boring Head Program

Due to the small sizes of these boring heads, the digital display will no longer be present on the head itself, rather the adjustment value will be shown on a separate mobile device or tablet that has the BIG KAISER App installed. Once connected to the head, the App also can be used to set the…

EWA Automatic Adjustment Fine Boring System

The EWA68 boring head has a travel range of .866” on diameter, and with the smallest insert holder, it covers the range of Ø2.677-3.543”. This means that similar-sized bores on the same part could be produced with a single boring head. With the addition of two larger insert holders, the range can…

Sphinx Noventa

Chamfering the entry and exit of 0.80mm to 6.00mm holes can be a tedious, time-consuming process. The Noventa from Sphinx can transform this process using an innovative geometry that improves cycle time, tool life and surface quality.

Jet-Through Hydraulic Chuck Line

The HDC jet-through type holders are ideal for high-precision 5-axis machining with maximum RPM of 35,000 and clamping range of ¼” to ½” and fit nearly any application in the automotive, aerospace, medical, and die and mold industries.

Chip Breaker Inserts

The exclusive FLM 3D chip-breaker design is used on PCD-tipped inserts ideal for finishing of aluminum components, where traditional flat-top inserts may produce a large continuous nest of chips that is difficult to remove from the bore and/or tool, even with high-pressure coolant. Three different…

Pressed-Geometry Carbide Inserts

BIG KAISER Precision Tooling is adding more than 30 pressed-geometry carbide inserts for its tools. The new insert design is the result of extensive research and testing.

Chip Blower

BIG KAISER has introduced a new Chip Blower designed to make removing chips and coolant from parts and machine tables fast and easy.

CAT50 Smart Damper

In order to offer more flexibility to customers, BIG KAISER has moved production of its CAT50 milling adapters to the U.S. The product performance and design will not change, but the move allows for more variation and faster delivery of special lengths for specific applications.

ChipFans and T-slot Covers

BIG KAISER has two powerful accessories crafted to improve in-process efficiency: ChipFans and T-slot covers. When used together with a machine that delivers on speed and accuracy, these accessories help machines reach maximum levels of productivity—even during downtime.