SpiroGrooving is a method for machining seal ring grooves developed by Sandvik Coromant that reportedly ensures high output of quality components and meets tough security demands. Used with the CoroBore XL system, the method utilizes a spirograph tool path to create close-tolerance seal ring grooves in a very secure and productive way.
Seal ring grooves are a critical feature on many oil and gas components, requiring close tolerances and high-quality surface finish. Conventional methods for machining seal ring grooves often result in slow production and poor process security. Multiple-operation approach, incorporating both roughing and finishing sequences, is another challenge. The tools used are single point- or plunging cutters that are prone to vibration. Difficult-to-machine materials, such as solid Inconel 718 and cladded Inconel 625, are often used, only adding to the long list of challenges to overcome. SpiroGrooving is a machining method used with the CoroBore XL system that utilizes a spirograph tool path to create close-tolerance seal ring grooves in a secure and productive way.
This solution is ideal for making seal ring grooves in pre-clad machining of steel and stainless steel. The unique internal coolant feature of CoroBore XL enables machining in advanced materials. Roughing and finishing are carried out in the same operation, thereby significantly reducing machining time and improving productivity. Altogether, this solution ensures high output of quality components and process security when machining seal ring grooves.
SpiroGrooving uses a circular spirograph tool movement in a taper. This reduces chip thickness, enabling light cutting action and increased feed. Parts of the insert cutting edge have an interrupted cutting behavior, eliminating long chips that can tangle the tool and spindle. With a unique NC-code generator, SpiroGrooving is programmed in just a few easy steps.
Fluid that reduces temperature buildup at the tool/workpiece interface during machining. Normally takes the form of a liquid such as soluble or chemical mixtures (semisynthetic, synthetic) but can be pressurized air or other gas. Because of water’s ability to absorb great quantities of heat, it is widely used as a coolant and vehicle for various cutting compounds, with the water-to-compound ratio varying with the machining task. See cutting fluid; semisynthetic cutting fluid; soluble-oil cutting fluid; synthetic cutting fluid.
Sandvik Coromant offers tooling dedicated to the challenging operation of machining valve seat pockets in oil and gas applications. Composed of a combination of an elliptical Silent Tools adapter and CoroTurn SL cutting head, this tool is designed to overcome prevalent issues such as narrow flow…
The new CoroMill 316 generation of exchangeable-head milling cutters from Sandvik Coromant further expands the company’s established solid, round tools portfolio by bringing higher levels of versatility and productivity to machining operations in ISO P (steel) and ISO M (stainless steel) materials…
Machine shops faced with identifying ways of achieving secure machining with long and predictable insert life in steel milling operations can turn to GC1130, an insert made with the Zertivo, a unique production technology from Sandvik Coromant. GC1130 helps to overcome challenging machining…
Offering high productivity and a low cost per edge, the CoroMill 745 from Sandvik Coromant has a double-sided, multiedge design that is ideal for large batch productions. With its tilted insert positioning system and sharp cutting edges, this milling cutter offers a light cutting action at low…
When material savings are a requirement due to machining expensive materials, large batch productions or both, it is essential to use the thinnest insert width possible. CoroCut QD dedicated parting off and deep grooving tools from Sandvik Coromant Co. are available in small insert widths with…
For longitudinal and face turning, Sandvik Coromant introduces the CoroTurn 300 for higher component quality, increased handling efficiency and longer tool life in steel turning operations. The CoroTurn 300 features stable insert clamping, as well as eight-edged inserts for the high chip control,…
Sandvik Coromant Co. says the GC4305-grade insert maximizes metal-removal rates, shortens processing times and enhances component quality when turning steel. It is made of a heat-resistant cutting material that is suitable for dry machining, which is ideal for automotive part manufacturers that…
Sandvik Coromant recently introduced a new endmill for small diameters, the CoroMill 390 with size 07 inserts is said to be a versatile cutter ideal for shoulder milling, deep shoulder milling, edging, linear and helical ramping, plunge milling, slot milling and face milling, according to the…
With CoroMill 425, Sandvik Coromant offers an eight-edge finishing tool designed for face milling that greatly improves metal removal rate and tool life in the ISO K application area. Due to its innovative setting system, it is particularly user-friendly.
PRODUCTS
