Sunnen's new SVL-2115 automated lapping machine brings increased productivity and part consistency to what is traditionally a manual process. Based on the same machine platform as the popular SV-2100 honing system, the SVL-2115 provides single-setup processing of hydraulic valves, sleeves, fuel system components and other parts that are prone to distortion when honed. The walkaway system uses an index table to automatically lap and air gage bores throughout the cycle. Gage readings are fed back to the control and the cycle is repeated until the parts are within spec.
“Automated lapping is more consistent than manual and there are fewer workers with the skills necessary for precision manual lapping. For very expensive parts an automatic lapping process reduces the possibility of ruined parts due to human error,” said Phil Hanna, product manager, Sunnen. “Since lapping is usually the last process during the machining of a workpiece, if the lapping is not correct all the work to get the part produced up to that point is wasted.”
The Sunnen lapping system handles workpiece diameters from 6.5 to 20 mm (0.26 to 0.70 in) and lengths up to 12 times the bore diameter, not to exceed 200 mm (7.87 in). Spindle speed range is 100-2000 rpm during lapping, but is capable of slow speeds for non-powered steps, such as lapping paste application or slow-rotation bore entry. Stroker speed is 0-350 sfm, with stroke length optimized to achieve a high degree of cylindricity.
“This system is a time-saver and it frees operators to run another machine, or handle other job floor duties,” added Hanna. “Operators load the workpiece into the fixture and start the lapping cycle, the cycle ends when the part is in tolerance.”
Sunnen has developed laps and gage probes to accompany this new system, and easy tooling and probe changeovers accommodate frequent changes during the course of a shift. A stack light allows operators to monitor cycle completions or faults from a distance, while a light curtain is standard. The lapping system is available with Sunnen’s new SVF filtration system.
Finishing operation in which a loose, fine-grain abrasive in a liquid medium abrades material. Extremely accurate process that corrects minor shape imperfections, refines surface finishes and produces a close fit between mating surfaces.
The new Sunnen SV-30 honing series is the next generation in the line of Cylinder King machines. True to its heritage, it achieves expert results on engine cylinder blocks, cylinder liners and other engine parts that require honing. Six standard models include four step-and-repeat capability…
Sunnen's SVL-2115 automated lapping machine brings increased productivity and part consistency to what is traditionally a manual process. Based on the same proven SV-2115 honing system, the SVL-2115 provides single setup processing of hydraulic valves, sleeves, fuel system components and other…
Sunnen’s SH-6000 KROSSGRINDING machines combine honing and ID grinding technology into a unique process that delivers higher precision roundness, straightness, bore size and finish than either process, and with tighter tolerances. The SH-6000 yields consistent and accurate bore size control…
Sunnen Products Co. has applied its bore sizing and finishing expertise to the high-production skiving and roller burnishing process. The result is the new SHD skiving/roller burnishing system that is 60 to 70 percent faster than traditional honing and engineered to deliver precise tolerances and…
The SHA-4000 from Sunnen Products Co. is a premium system for high-volume processing of gears, turbocharger bushings, cartridge valve components and pistol barrels, among others. With the popular SH-4000 as a base, the SHA-4000 integrates Swiss automation to create an off-the-shelf, robust, high-…
Sunnen's new SV-15 honing machine combines the DNA of the legendary Cylinder King machine with a new 9-inch Siemens touchscreen PLC to provide more features, convenience and even greater precision and consistency than the "King" of motorsports honing. The multilingual control…
Sunnen's new SVF series Grit Guard coolant filter is a build-to-suit solution with progressively higher levels of filtration available, along with chilling, to meet process requirements in abrasive machining. Base Grit Guard models are available in 55- and 110-gallon capacities, equipped with…
Sunnen says its new SSH-1680 honing system makes the efficiency, accuracy and consistency of power-stroke honing, affordable to shops looking to make better bores, faster, on a range of parts.
Sunnen introduces digital control of spindle speed, power-stroke speed and extra strokes on its new SH-2000 job-shop honing machine, designed as an affordable and flexible tool for bore sizing/finishing on a wide variety of parts.
Sunnen's new HTR all-electric job-shop tube hone combines servo precision and cycle-automation features with constant spindle power and 0.1mm (0.004") stroke repeatability to efficiently hone blind bores or correct tight spots in a bore without operator intervention.
PRODUCTS
