Titex DB133 Supreme Solid-Carbide Microdrill

April 04, 2016
Titex DB133 Supreme Solid-Carbide Microdrill

Walter has introduced the Walter Titex DB133 Supreme, a solid-carbide microdrill that reportedly delivers tight tolerances, high-quality surface finishes, superior process reliability and longer tool life. The difference for the DB133 Supreme begins with the use of grades WJ30EL and WJ30ER, developed by Walter specifically for microdrills. These grades provide the drills with superior wear resistance.

ln addition, Walter’s new cutting edge geometry increases the process reliability of these new drills, and optimized dimensions allow for maximum stability, even with the smallest drills. The exceptionally uniform finish on the drill cutting edge and tight tolerances ensures excellent workpiece surface finishes. With the Walter Titex DB133 Supreme special geometry, chip removal is effective, even without through coolant. This allows holes of upto 8 diameters deep to be easily achieved.

The new solid-carbide microdrills, with their 140° point geometry, can be used universally on many different materials in ISO material groups P, K and N. Diameters range from 0.02 to 0.12 in. (0.5 to 2.95 mm). This new drill design is ideal for users in general machining, mold and die making, the energy and automotive industries and any other areas where small diameter, deep holes, are required.

Related Glossary Terms

  • coolant

    coolant

    Fluid that reduces temperature buildup at the tool/workpiece interface during machining. Normally takes the form of a liquid such as soluble or chemical mixtures (semisynthetic, synthetic) but can be pressurized air or other gas. Because of water’s ability to absorb great quantities of heat, it is widely used as a coolant and vehicle for various cutting compounds, with the water-to-compound ratio varying with the machining task. See cutting fluid; semisynthetic cutting fluid; soluble-oil cutting fluid; synthetic cutting fluid.

  • wear resistance

    wear resistance

    Ability of the tool to withstand stresses that cause it to wear during cutting; an attribute linked to alloy composition, base material, thermal conditions, type of tooling and operation and other variables.

Additional Products from Walter USA LLC

Walter USA LLC has expanded its line of Walter Cut tools for parting, grooving and turning with three new models optimized for shallow depth grooving of up to a maximum of 0.236" (6mm).

Walter LLC has expanded its popular line of Walter Titex X-treme deep-hole micro drills with three new high performance variants: the X-treme M, X-treme DM8 and the X-treme DM12.

Walter USA LLC has introduced the Walter Valenite F4050 cartridge type cutter, an innovative new approach to the challenges of high-speed milling of non-ferrous materials.

Walter USA LLC has introduced the Walter Titex XD70, a solid carbide drill that employs design and manufacturing innovations that bring new levels of productivity to the drilling of extremely deep holes.

Walter USA LLC has introduced the Walter Prototyp Proto-max Ultra ball-nose end mill, specially engineered for efficient machining of hard materials.

Walter USA LLC has expanded its versatile Walter Valenite Xtra-tec insert drill line with additional products at both ends of the diameter spectrum.

Walter USA LLC has expanded its Walter Titex X-treme line of versatile, high-performance solid carbide drills with the addition of a drill for shallow hole drilling, while maintaining high rigidity requirements.

Walter USA LLC has introduced two new Walter Valenite ISO indexable inserts designed for machining nickel, cobalt and iron-based high temperature alloys, such as Inconel 718 and Waspaloy, commonly used in the aerospace, power generation and chemical industries.

Walter Titex X-treme solid carbide high-performance drills from Walter, currently in use in a wide variety of industries including automotive, energy, die and mold and general metalworking applications are now available as non-coolant thru drills.

In response to the success of its Tiger-tec Silver high-performance inserts, Walter USA LLC has added a tough new grade to the Walter Valenite indexable milling grade family. The existing universal WKP35S grade is now joined by WKP25S, a CVD aluminum oxide-coated insert that permits higher feed and…

PRODUCTS

11/20/2024
Jorgensen Conveyor and Filtration Solutions, Mequon, Wisconsin, highlighted its distinctive…

10/23/2024
The Starrett AVR400 offers full CNC capabilities including X-Y-Z positioning and comprehensive zoom…

10/23/2024
TIN Coated Thread Gages have high dimensionally stable HSS construction with TIN coating that…