Product News

The PS two-speed gearbox from Stober Drives Inc. features two different options, from a direct drive to customer ratio choice. The 1:1 ratio direct drive can be used for high-speed cutting up to 10,000 rpm.

Behringer Saws Inc. has added the VA-L 500 to its line of circular cold saws. Behringer Eisele GmbH designed the VA-L 500 sawing system specifically for production cutting of aluminum and nonferrous materials.

MAPAL has developed a multi-bladed fine boring tool with guide pads. Thanks to the multiple cutting edges, the cycle time is significantly
reduced compared with single-bladed tools.

Guyson has just completed another one of its popular RB-9 robotic blasting systems. The customer had a demanding surface preparation specification that could only be achieved by precise robotic gun manipulation and part fixturing and the use of high-performance model 75/12 media cyclone.

Euro-Tech Corporation is the North American distributor of the Tshcorn line of 3D testers. The most popular model, the SLIMplus analog 3D-tester can remain wet in the toolchanger—without any damage; impervious to splash water and oil.

The new Carmex AMT (aluminum mill-thread) cutter delivers a fine surface finish, good chip evacuation and is constructed of solid carbide to absorb cutting forces in high-speed aluminum machining. Available in a cylindrical shank or Weldon shank, the AMT is designed to minimize the tendency of aluminum to stick to the cutting tool edges.

MAPAL offers a broad portfolio of ISO tools for milling operations. A new series of cutting materials has been developed especially for the milling of the whole bandwidth of cast iron grades – GJL, GJV and GJS.

Weiler Abrasives Group has announced a new product in its Tiger bonded abrasives lineup. The new Tiger UltraCut thin cutting wheels deliver fast cuts, long wheel life and consistent performance—with a true 1mm thickness.

Niagara Cutter, a subsidiary of Seco Tools LLC, launched its new Niagara Cutter Stabilizer 2.0 next-generation family of endmills. The Stabilizer 2.0 cutters incorporate patented continuous variable asymmetrical geometries and provide incredibly smooth and chatter-free performance that allows feed rates to be doubled as compared with previous models.

Mil-Tec Inc. says its HV5HD series endmills are ideal for machine shops and other manufacturing facilities that require flexibility and value. With a full range of cutter bodies and precision-ground carbide inserts, the tools can reportedly handle any application and material.

Cast iron drilling has taken a significant step forward with an expanded insert range for new diameters in the high-speed Color Select P6005-WKK45C grade for Xtra·tec B401x point drills. These new inserts are available in diameters up to 1.50 in. (37.99 mm). With this expansion, the grade specially developed by Walter for machining cast iron can now be used to drill all holes from 0.47 to 1.50 in. (12 to 37.99 mm) in diameter at depths up to 7×Dc and holes from 0.71 to 1.02 in. (18 to 25.80 mm) in diameter at hole depths up to 10×Dc.

Arno Werkzeuge USA announced the introduction of its SA series of cutting tools and inserts for grooving and part-off or cut-off operations for North America. The SA system from Arno USA is a modular grooving system with a single toolholder, which turns into different tool variants by simply changing the support blade and clamp.

Tungsten ToolWorks offers seven micro-endmill geometries in an “infinite” variety of diameters, lengths, end conditions and coatings, including diamond, based on customer inputs. Cutting diameters as small as 0.005" (0.127mm) can be configured from an array of fractional or metric carbide blanks.

Gear component manufacturers can easily achieve break-in lubricity, robust corrosion protection and galling resistance on critical components. Birchwood Technologies’ TRU TEMP low-temperature, black-oxide process meets demanding finishing requirements while creating a non-dimensional finish, maintaining the same material hardness and load-bearing properties.

Midwest Industrial Tool Grinding Inc. has released the newest edition of the standard tool catalog. The largest edition published by MITGI, the catalog includes more than 8,700 tools, an increase of 57 percent over the 2015 offering.

PCT says its IXC series is engineered with a 45° protective corner chamfer and coolant holes to eliminate chipping on the cutting edge and permit efficient chip evacuation. The tool’s design consists of distinctive triple-margin for advanced precision and a smooth finish on the part.

YG-1 says its ONLY ONE endmills are made of a new composition of P/M accompanied by the latest coating technology, giving this tool excellent wear and shock resistance. The substrate/coating combination provides for better adhesion and a stronger cutting edge without compromising shock resistance.

Klüber Lubrication has introduced Klübersynth GE 4 80 W 140, a fully synthetic high-performance gear oil based on polyalphaolefin (PAO) that offers high stability and protection even under shock loads. With Klübersynth GE 4 80 W 140, Klüber Lubrication complements its range of efficient high-performance oils for railway gears.

PCT’s NXC series is engineered specifically for nickel-based drilling applications. The tool’s design features a double- margin geometry, coolant holes and a slow helix to provide you with advanced chip evacuation and a stronger cutting edge.

Kyocera’s new CA3-series CVD-coated carbide inserts are for turning cast iron. The CA3-series grades with new K-series chipbreakers have become powerful contenders for gray and nodular cast iron machining applications, according to the company.