Why Resources
Resources
Why Resources
Explore 121 published CTE resources related to Why across 47 articles, 19 products, 20 videos, and 35 news items.
47
Articles
19
Products
20
Videos
35
News
Articles
47 articles
Products
19 products
Videos
20 videos
News
35 news items
Tungaloy responds to rising carbide costs
BIG Daishowa Hosts Breakfast & Learn Event
ZOLLER Open House Focuses on Integrating Success
The power of density determination in additive manufacturing
5 reasons why CFexpress is the future of industrial memory cards
Tricks and techniques for specifying surface texture parameters
Browse
Browse all Why resources
Browse results
ROTA-M Flex 2+2
The SCHUNK ROTA-M flex 2+2 clamping is done in a self-locking manner, and the clamping condition is signaled via indicating pins. The standard chuck sizes 260 to 1200 achieve jaw strokes from 9.5 mm to 17.8 mm and high clamping forces from 100 kN to 180 kN.
LASER P 400 Series and LASER S 2500 U
As with all of GF Machining Solutions' LASER machines, the LASER P 400 series offers repeatable high performance, consistent accuracy and unvarying quality. Fully digitized texturing makes it easy to texture, mark, engrave and add functional surfaces to parts, molds and dies, even when dealing with complex 3D parts.
20-inch Arboga Gear Head Drill Press
The gear drive transmission delivers full power at any speed, driving the cutting tools at nearly 100% of the available motor horsepower. Helical ground gears ensure positive, quite operation and make speed changes fast and easy. The wide speed range makes this the ideal drill for drilling large to small diameter holes fast and easy.
DMP Flex 350 Metal 3D Printer
The machine's repeatability and top quality result from a pure atmosphere during printing, a consistently low-oxygen environment with fewer than 25 parts per million. This solution ensures excellent microstructures, very high material density and stable mechanical properties.
Tru Temp 2nd GEN
Operating at the optimum temperature range of 200° – 210°F as the original Tru Temp XL, TRU TEMP 2nd GEN makes it easy to use in-house and operator friendly. The chemistry is easy to manage and contains no EPA regulated metals, so rinse waters are generally sewerable by neutralizing the pH with a typical discharge range of pH 7-11.
Power skiving for electric vehicles
Manufacturers can achieve 90% machine use reduction with power skiving.
Rollomatic LaserSmart 510
Rollomatic LaserSmart 510. Watch Cutting Tool Engineering's video coverage, featuring original footage and context from the related product, process, event, or shop-floor demonstration.
Strausak ONE machine demo
Strausak ONE machine demo. Watch Cutting Tool Engineering's video coverage, featuring original footage and context from the related product, process, event, or shop-floor demonstration.
Best ways to choose a touch probe
For manufacturers looking to reduce setup times, increase machine usage time and improve the dimensional accuracy of the finished workpieces, touch probes can offer great advantages.
WorkPartner 1+ (WPT 1+)
GF Machining Solutions offers eight WPT 1+ models. Shops can start with a single magazine unit and then add one more as production needs change. The systems easily serve one or two machines within in a production cell thanks to the flexibility of the magazine capacities and its variants (Light, Heavy or a Rotary magazine), along with fully integrated pneumatic control for gripping devices and table chucks.
Microlution ML-5
The Microlution ML-5 is optimized for micro-scale holemaking and fine cutting, which it performs without creating any heat-affected zones. The machine's compact, high- performance, ultrafast femto laser reduces cycle times and tooling costs to enable the production of precision parts in seconds.
Mikron MILL P 800 and 900
The Mikron MILL P 800 U S allows shops to machine components fully on a single machine and eliminate transfer-related part errors, along with stacked tolerances, for enhanced quality of finished parts. This scalable solution is perfectly suited for automation, with a smaller footprint compared to the Mikron MILL P 800 U.
