MDES is an open data exchange specification for the manufacturing industry. It is designed to increase the interoperability of different hardware and software systems across all stages of the product lifecycle, from design and planning to production and quality control. The free-to-use specification enables any company to adopt MDES as a universal…
For wireframe 5-axis machining with sphere mills, users can now define which part of the tool is in contact with the drive curve. For example, cutting with the cylindrical part of the flute enables the tool to withstand greater forces and may be more suitable for cutting through certain materials. It can also help to prolong tool life. Cutting…
Users can choose between the climb or conventional cutting methods and define the contact point between the tool and the workpiece, e.g. in the middle of the flute. This is relevant for non-ball cutters like chamfer mills where careful control over the cutting conditions creates chamfered edges with a high quality finish.
Integrated into the Rafinex solution, the ModuleWorks software generates highly automated, collision-free toolpaths for PBF. The workflow enables users to quickly program resilient, high-performance parts for production where expert knowledge of the manufacturing process is not required. The pre-defined parameters assist engineers in optimising…
For multi-axis subtractive machining, there is a new option to preview the automatically detected deburr edges before calculating the toolpath. Users can also include/exclude drive curves in/from the toolpath calculation to speed up programming. The rotary machining component now offers a floor finishing cycle to complete the ModuleWorks basic…
IMSce for Mastercam combines IMS G-code emulation with the ModuleWorks simulation and post processing technology to provide a G-code parsing solution that connects directly to Mastercam. The solution enables Mastercam users to simulate and verify G-code including controller variables, subprograms, expressions and canned cycles for a wide range of…
With the new feature for creating generic revolved tools, operators can customize the shape of the cutting and non-cutting parts of the tool for all triangle mesh-based roughing strategies. Customized tools avoid over-simplifications because they take specific features of the tool shape into account during the toolpath calculation to deliver a…
Built upon the ModuleWorks toolpath calculation and simulation technology and integrated directly into the CNC, ModuleWorks NGSP brings the graphic touchscreen environment of automated programming to the shopfloor, enabling machine tool operators to quickly build, simulate and run NC programs without in-depth knowledge of G-code programming.…
The ModuleWorks optics kernel has been developed to meet the growing demand for machining increasingly complex free-form geometries with a precision in the nm range. Integrated into the LT CAM product line, it enables LT Ultra to offer flexible solutions for a diverse range of ultra-precision machining applications with automatic toolpath…
The new blisk module provides parameters and settings for creating very smooth toolpaths for multiblade machining. Smooth toolpaths ensure consistent acceleration and, therefore, shorter cycle times. The new option for the flatland cycle enables operators to machine flat undercut areas using slot milling tools.
This is the third ModuleWorks release of 2021 and contains new and enhanced features across the entire product range, including new multi-axis hole making cycles with independent feed rate control, a new morph pattern for laser aided manufacturing and a collision-free solution for robotics post processing.
The ModuleWorks CAS uses real-time machining data and look-ahead technology to detect immanent collisions and stop the machining process before an actual collision occurs. The CHIRON Group uses CAS as part of their ProtectLine digital system to protect their high-end machining centers from potentially expensive damage and downtime.
Integrated directly into the HMI, ModuleWorks machine simulation enhances the Mitsubishi controls with high-performance multi-axis milling and turning simulation including gouge and deviation analysis and collision detection with manual or automatic refinement of the simulation result. Workpiece coloring according to the sequence provides…
This new feature for multi-axis machining automatically applies a rest finishing cycle to any remaining non-machined areas that could not be reached by the wall and floor finishing operations. The wall and floor finishing operations carry information about which areas can be machined and which areas cannot. The new rest finishing cycle…
Rafinex stochastic topology optimization anticipates real-life variability in material loads and material properties to help engineers design robust, reliable parts for high-performance applications in the aerospace and automotive industries, among others. The toolpath algorithms automatically calculate the optimal, material-independent toolpaths…
Users can now define a fixed contact point on the tool that enables the cone and cylinder to be used for deburring. This makes deburring an attractive option for chamfering because the cone and cylinder leave no imprint of the tool’s profile. To ensure a uniform chamfer, the tool is not tilted. Instead, to avoid collisions, the toolpath is…
ModuleWorks, a leading innovator in toolpath generation and simulation technology for digital manufacturing, and Toolpath, a developer of a new cloud-based, AI-driven manufacturing workflow automation platform, have signed a multi-year Technology Partnership focusing on accelerated deployment of innovative cloud computing technology for machining…
ModuleWorks, a software provider for the CAD/CAM industry, has partnered with DN Solutions, a CNC machine tool builder, involving equity investment and business cooperation.
ModuleWorks, a leading innovator in toolpath generation and simulation technology for digital manufacturing, acquired Celeritive Technologies Inc., the developer of VoluMill.
