Home

Products

+ click to show 4 results
SS and SR Series Micro Endmills
Get highly accurate and long-lasting carbide miniatures with RobbJack's SS and SR series micro endmills.
A1-303 Series Cutters
RobbJack says its A1-303 series allows you to machine deeper parts, slots and walls in one pass, with minimal chatter and vibration. The A1-303 tool’s chatter-reduction geometry is ideal for high-speed machining of aluminum and other nonferrous materials.
DM/MDM Series Endmills
The RobbJack says its DM/MDM series with new carbide and coating combination, eliminates or reduces the need for polishing, reduces wear by 909 percent, holds tighter tolerances and lasts 450 percent longer than comparable carbides and coatings designed for hard metal applications.
FM Series Tools
RobbJack’s FM series with chatter-reduction geometry, tackles deep pockets, thin walls and other severe aluminum applications. These high-performance tools reduce or eliminate chatter and ledging, and in many cases, eliminate the need for secondary finishing operations.

Articles

+ click to show 5 results

Swell cells

Author:
William Leventon
Column:
Feature Article
Published:

Avoid machining malpractice

Author:
William Leventon
Column:
Feature Article
Published:

The allure of aluminum

Author:
Alan Richter
Column:
Feature Article
Published:

Moldmakers tout benefits of aluminum molds for production

Author:
Greg Bartlett
Column:
Feature Article
Published:

Routing new composite materials requires new solutions

Author:
Alan Richter
Column:
Feature Article
Published:

Videos

+ click to show 7 results

Ask the Experts: Machining Aluminum

Cutting Tool Engineering recently organized and hosted a Question & Answer style webinar with industry experts from Walter AG and RobbJack Corp. exploring the difficulties associated with machining aluminum. Terry Iverson, President and CEO of Iverson & Company, a sales, service and precision machine tool rebuilding company, moderated the…

Tips to improve performance by 500% when machining medical parts

CTE and the RobbJack Corporation in November 2020 presented a webinar titled, "Tips to Improve Performance by 500% When Machining Medical Parts." Presented by Mike MacArthur, RobbJack's vice president of engineering, the webinar examines new cutting technologies and strategies that solve many of the difficulties experienced by shops…

Illuminating aluminum demos

Presented as a video supplement to Cutting Tool Engineering's July 2020 article that addresses the need for part manufacturers to work with toolmakers to learn about the wide range of tool options available today, "Illuminating Aluminum" offers two machining demonstrations from LMT Onsrud LP, Waukegan, Illinois, and RobbJack Corp.,…

Composite machining

Cutting Tool Engineering magazine hosted a Webinar Dec. 10, 2014, featuring Mike MacArthur, vice president of engineering at the RobbJack Corp. Following the main presentation, titled "Technologies & Strategies for Composite Drilling, Routing and Trimming," CTE Publisher Don Nelson held a brief Q&A session with questions…

Tired of the chatter?

The RobbJack Corp. demonstrates its patented mirror-edge geometry, which reportedly dampens vibration to help eliminate chatter, in this brief 78-second video. 

RobbJack demos high-speed milling

Presented as an online supplement to Cutting Tool Engineering's July 2012 report on high-speed milling, the following video from the RobbJack Corp., Lincoln, Calif., demonstrate a variety of high-speed milling operations.

Successful Machining of Composites

Jared Tellian, applications engineer with RobbJack Corp., presents a 12-minute seminar on "Successful Machining of Composites" as part of Cutting Tool Engineering's Fast Track Seminar series. The seminars were presented and filmed at our booth during IMTS 2010.